• Economic and Environmental Geology
• /
• v.32 no.4
• /
• pp.323-337
• /
• 1999

Late Cretaceous to early Tertiary volcanic rocks in the Kyongsang basin exhibit high-K calc-alkaline characteristics, and originated from the magmatism related genetically to subduction of Kula-Pacific plate. They represent HFSE depletion and LlLE enrichment characteristics as shown by magmas related to subduction. Early studies on the depth of magma generation has been estimated as 180-230 km based on K-h relation should be reevaluated, because the depth of peridotite partial melting with 0.4 wt. % water is 80-120 km at subduction zone, and subducting slab in premature arc can melted even lower than 70 km. Moreover the increase of potassium contents depends on either contamination of crustal material and fluids of subducting slab or low degree of partial melting. If the inclination of subduction zone is 30 degrees and the depth to the Benioff zone is 180-230 km, the calculated distance between the volcanic zone and trench axis would be 310-400 km. It is unlikely because the distance between the Kyongsang basin and trench during late Cretaceous to early Tertiary is closer than this value and not comparable with generally-accepted models in subduction zone magmatism. $K_{55}$ of the volcanics in the Kyongsang basin is 0.3-2.3 wt.% and the average indicate that the depth ranges between 80-170 km on the diagram of Marsh, Carmichael (1974). Fractionation from garnet lherzolite, assumed the depth of 180-230km, is not consistent with the REE patterns of the volcanoes in the Kyongsang basin. Futhermore, the range of depth suggested by many workers, who studied magmatism related to subduction, imply shallower than this depth. Crustal thickness calculated by the content of CaO and $Na_2O$ is about 30 km and about 35 km, respectively. Paleo-crustal thickness during late Cretaceous to early Tertiary times in the Kyongsang basin inferred about 30 km calculated by La/Sm versus LaJYb data, which is also supported by many previous studies.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.3
• /
• pp.252-258
• /
• 1985

An experiment was conducted at the Yeongnam Crop Experiment Station to obtain basic informations about cultural techniques for high yielding by manipulating plant spacing using two rice cultivars, Samgangbyeo (Indica/Japonica type) and Nakdongbyeo (Japonica type), and four plant spacings, 10${\times}$10cm, 20${\times}$20cm 30${\times}$30cm and 40${\times}$40cm, with 4 kinds of seedling number per hill, 1,3,5 and 7, respectively. High photosynthetic efficiency (Eu) exhibited at the Samgangbyeo compared to Nakdongbyeo regardless of plant spacings and seedling numbers. For Samgangbyeo, Eu value was the highest at the 20${\times}$20cm plant spacing and five seedlings and seven seedlings per hill showed high Eu values at 10${\times}$10cm plant spacing and 20${\times}$20cm plant spacing, respectively, while other plant spacings were not significantly differed among seedling numbers. For Nakdongbyeo, however, one seedling plot obtained high Eu value at the 10${\times}$10cm plant spacing while this Eu value increased as the seedling number per hill increased in other plant spacings. There was a high positive correlation between rice grain yield and total competition index for both cultivars while kind of relationships differed in these two cultivars; linear relationship for Samgangbyeo and exponential relationship for Nakdongbyeo, respectively. Competition index between rice hill was more significant than within rice hill for Samgangbyeo while both competition indexs were important for Nakdongbyeo to increase rice yield.

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.1-8
• /
• 1976

One of the most common needle leaf species used in planting in Korea is korean pine (Pinus koraiensis S. et Z.), and jack pine (Pinus banksiana Lamb.) is one of the test species for suitability. The relation of nursery bed density of 2-1 korean pine and 1-1 jack pine was studied at the Kwang Nung Nursery, Central Branch Station of Forest Research Institute, and about 40km north of Seoul. Nursery bed density of 2-1 korean pine, which ranged from 36 to 324 trees per square meters and of 1-1 jack pine, which ranged from 25 to 169 trees per square meters, had a marked effect on caliper, height, dry weight and percent and amount of plantable stock. The soil physical and chemical properties is silt plus clay, 50.55 percent; organic matter, 2.09 percent; total nitrogen, 0.13 percent; available phosphorus, 253.25 ppm; exchangeable potash, 0.46 m.e/100g; and pH, 5.58. As the density of the nursery seedling stand of 2-1 korean pine increases, the average tree height increases (Fig. 1A), but in 1-1 jack pine density do not affect to increase or decrease the average tree height. As the density of nursery bed increases, the average stem caliper (at 2cm above ground line) and dry weight decrease (Fig. 1B), but the decreasing rate is more seriously in 1-1 jack pine than 2-1 korean pine (Fig.5). As increasing the density of nursery bed, the T/R ratio of trees of the test species increase. Also the dry weight of leaf, stem and root parts are decreasing in proportion to the increase of stand density, but the drop rate of jack pine is more rapid than korean pine (table. 1) The patent facts of difference of growth characteristics between 2-1 korean pine and 1-1 jack pine were studied. These facts should be used to select the scale of stand density at the nursery bed or the plantable site. Korean pine is demanded high density, on the other hand in jack pine low density are more suitable to manage the stand density. Stands of comparatively low density had the greatest percentage of high-quality stock, and the stands of high density had less than the high quality trees of low density. An important criterion of the best density is percent and number of high-quality trees produced per square meter of bed area. Stem caliper and stem height of seedling is used in most public nurseries to sort seedling into plantable grades. The stock grade standard has set at 4.5mm caliper and 16cm height of 2-1 korean pine as the minimum desired stem caliper and height. By the result studies, the plantable stock grade standards of 2-1 korean pine used at stem height 16cm and stem caliper 4.5mm from public nurseries should be reformed to stem height 18cm and stem caliper 4.0mm by the growth characteristics and the tree distribution of stem height and caliper of relation to density. For the 2-1 korean pine, best density should be about 160 to 200 trees per square meter according to soil fertility. For the 1-1 jack pine, the suitable standard of plantable stock should be at stem height 25cm and caliper 6mm (at 2cm above ground line) and best density was about 100 to 120 trees.

• Korean journal of applied entomology
• /
• v.18 no.2 s.39
• /
• pp.101-106
• /
• 1979

Present studies were carried out to get a basic information for biological control of soybean rod borer, Grapholitha glycinivorella Matsumura, causing main injury in soybean cultivation in Korea. 1474 native strains were cultivated in field to evaluate the pod borer damage. Pubescence density and color, maturity group, seed coat color, aphid and general leaf damage and seed damage by pod borer were investigated, and determined among their relationships. As another basic study for ecological control of insect, 6 leading varieties were planted on different planting date with 3 levels of plant spacing, on which pod borer damage and some related agronomic characters were studied. The results obtained one summarized as follows: Average injury of soybean pod borer was $5.2\%$ ranging $0-38\%$ in 1474 strains planted on 20 May. Non-significant correlations were found between pod borer damage and pubescence density and color, while pod borer damage closely related with maturity groupand aphid damage at $5\%$ level ofttests. Most severe damage was found in green seed coast color and maturity group V. Late and sparse plantings tend to have more damages to the pod borer than those of early and dense plantings. Pod setting date and period of pod maturing seemed related with pod borer damage. Bongeui and Chungbuk-baik cultivars were resistance to soybean pod borer, while Clark and Kumkang-daerip were susceptible in field tests.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.240-247
• /
• 2021

The purpose of this study was to identify the professional identity levels and characteristics of occupational therapists through Rasch analysis and to use this as the basis for further assessment and research on the same subject. An online survey was conducted, and the response of 88 people working as occupational therapists between May and June 2020 was analyzed. The collected data included the frequency, analyzed by SPSS 22.0 and technical statistics, Winsteps 3.8.0 target and item suitability, item difficulty, level scale, and separation reliability. According to the analysis, 17 (16.3%) of the subjects and 5 (20%) out of 25 items were unsuitable. Item difficulty was the highest in the category "I systematically read professional publications on occupational therapy", and the lowest level of difficulty in "I make my own decisions about what to do." The three-point scale was suitable for the equilibrium scale, and the separation reliability was between .86 and .95. Thus, identity levels and characteristics of occupational therapists, the suitability of items and subjects, and difficulty levels can be identified through Rasch analysis. In the future, research should be conducted on various sample groups, to develop identity measurement tools specifically for occupational therapists, and to present items appropriate to the characteristics of their work.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.200-215
• /
• 2023

With the rapid advance of autonomous driving technology, the related vehicle market is experiencing explosive growth, and it is anticipated that the era of fully autonomous vehicles will arrive in the near future. However, along with the development of autonomous driving technology, questions regarding its safety and reliability continue to be raised. Concerns among technology adopters are increasing due to media reports of accidents involving autonomous vehicles. To promote the improvement of the safety of autonomous vehicles, it is essential to analyze previous accident cases and identify their causes. Therefore, in this study, we aimed to analyze the factors influencing the severity of autonomous vehicle accidents using previous accident cases and related data. The data used for this research primarily comprised autonomous vehicle accident reports collected and distributed by the California Department of Motor Vehicles (CA DMV). Spatial information on accident locations and additional traffic data were also collected and utilized. Given that the primary data used in this study were accident reports, a Poisson regression analysis was conducted to model the expected number of accidents. The research results indicated that the severity of autonomous vehicle accidents increases in areas with low lighting, the presence of bicycle or bus-exclusive lanes, and a history of pedestrian and bicycle accidents. These findings are expected to serve as foundational data for the development of algorithms to enhance the safety of autonomous vehicles and promote the installation of related transportation infrastructure.