• Korean Journal of Environmental Agriculture
• /
• v.11 no.3
• /
• pp.195-200
• /
• 1992

Heavy metal adsorption on peat was studied to examine the utilization of abundant natural resouces as pollution control. The smaller the peat particle size, the more the heavy metals studied were adsorbed. Adsorption of heavy metals on peat was greater in single metal solutions than in mixed solutions, and the order of adsorption amount on peat was Cu > Cd > Zn. The most effective pH range of the adsorption of Cd, Zn, and Cu was between 4 and 6. With increasing the concentration of heavy metals the amount of adsorption on peat was increased, but the adsorption ratio was decreased. The adsorption of heavy metals on peat was fitted to the Freundlich isotherm and peat was appeared to be an effective adsorbent of the heavy metals. The treatment of polyethyleneimine(PEI) on the peat surface effectively increased adsorption capacity of the heavy metals. Because of its higher energy content, the heavy metal adsorbed peat could be utilized as a energy source. After burning the peat, the reduced peat volume could be save the expenses for waste disposal.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.7
• /
• pp.525-531
• /
• 2013

In an effort to find a solution to the eutrophication of major Korean rivers, a method to utilize multi-purpose filtration pond was investigated. As literature showed that oyster shell is known to be the most adequate for the removal of dissolved phosphorus in Korean rivers, batch and column experiments were performed using oyster shell as an adsorbent in this study. The results of the batch experiment showed that the removal of dissolved phosphorus from river water through adsorption as a way of preventing algal growth was not practical. The results obtained from the column experiment, however, suggested that oyster shell may be utilized as an adsorbent under limited conditions. Based on the results of the experiments a methodology was proposed to remove algae from river water through the use of multi-purpose filtration pond. This method involves mechanically removing the accumulated algae cake from the surface of the artificial stream in the pond towards the condensing part located at the lower reach of the stream, where particles gather before the final removal. In addition, employment of oyster shell as an adsorbent in the condensing part allows prevention of phosphorus released from the dead algae re-entering the river water.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.5
• /
• pp.303-309
• /
• 2017

This study investigated the potential use of steel slag (SS) (0.5~2.0 g/200 mL) for the removal of phosphate from wastewater compared with activated carbon (AC) (3.0~6.0 g/200 mL). The adsorption equilibrium data were best represented by Langmuir isotherm and its calculated maximum adsorption capacity was 91 mg/g for SS, 27 mg/g for AC. The adsorption kinetics was found to follow the pseudo-second order kinetics model and its rate constant was $0.0232{\sim}0.1357g/mg{\cdot}min$ for SS, $0.0247{\sim}0.1221g/mg{\cdot}min$ for AC. The overall uptake for the SS and AC was maximum at pH 2. Therefore, it can be concluded that steel slag could play an effective role in reducing phosphate concentration compared with activated carbon.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.677-682
• /
• 2006

Dodecyldimethylethylammonium (DDDEA), a cationic surfactant, and aluminum metal ions were used with bentonite to synthesize to synthesize an improved organo bentonite. Among three different synthesis procedure for organo bentonites, aluminium-pillared bentonite showed the highest DDDEA sorption, which indicated that aluminium-pillared organo bentonite would exhibit the highest sorption capacity for organic contaminants. Aluminium pillared organo bentonite also showed a high sorption capability for phosphorus, while it did not exhibit strong sorption for nitrate. In the meantime, more desorption was observed with aluminium-pillared organo bentonite than ordinary organo bentonites.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.2
• /
• pp.87-95
• /
• 1983

Trihalomethane removal efficiency by a fixed bed carbon adsorber was a subject of this study. Along with laboratory scale column operations, a simple adsorption model was developed to predict removal efficiency. The adsorption model includes an overall mass transfer coefficient, K and Freundlich adsorption constants, $K_F$ and n. Simulation results showed that increasing K and $K_F$ or decreasing n would take more loading and prolong run time of the adsorption bed. Typical S-shaped breakthrough curves were obtained from the experiments. The operational results at $20^{\circ}C$ and $25^{\circ}C$ indicated that a moderate difference in water temperature would not affect the treatment efficiency significantly. The adsorption constants determined from the column operation and the model simulation were reasonably close to those obtained from the isotherm test. It may be concluded that trihalomethane can be removed successfully by a fixed bed carbon adsorber.

• Journal of Environmental Science International
• /
• v.5 no.2
• /
• pp.243-252
• /
• 1996

In order to investigate the effects of pH and organic matter content on cadmium adsorption and exchangeable cations desorption in soils, the adsorption isotherms of cadmium and the desorption isotherms of calcium and magnesium on four New jersey soils at four pH values were plotted, and the cadmium partition coefficients (Kd) were also calculated. The slopes of cadmium adsorption isotherms dramatically increased with increasing solution pH. Judging from Langmuir adsorption equations, the maximum adsorption quantities(b) of cadmium at high pH values were much greater than those at low pH values for the same soil. The partition coefficients increased greatly with increasing solution pH. The slopes of regression equations between partition coefficients and pH values were steep in the order of the organic matter content of the soils. The correlation coefficients (r2) between partition coefficient and organic matter content for soils. The correlation coefficients (r2) between partition coefficient and organic matter content for $1\times10^{-4}$M increased from 0.3027 at pH 4.0 to 0.9964 at pH 8.5 and from 0.2093 at pH4.0 at 0.9657 at pH 8.5 for$2\times10^{-4}$M ${Cd(NO_3)}_2$. The desorption quantities of calcium and magnesium decreased with increasing solution pH and increased with- increasing cadmium adsorption.

• Environmental engineer
• /
• s.65
• /
• pp.55-57
• /
• 1992

• Environmental engineer
• /
• s.172
• /
• pp.48-54
• /
• 2000

• Journal of the Korean Geotechnical Society
• /
• v.16 no.2
• /
• pp.91-102
• /
• 2000

자연점토지반에서의 중금속 흡착시 온도변화에 따른 영향은 지금까지 2차적인 것으로 간주되었다. 그러나 최근 몇몇 연구자들에 의하면 온도변화가 중금속 흡착 거동에 큰 영향을 미친다고 보고하였다. 따라서 본 연구에서는 자연점토 지반에 대한 중금속 아연(Zn) 흡착시 온도변화에 따른 흙의 각 구성성분별 흡착거동을 살펴보기 위해 혼합 흡착-연속추출법(combined absorption-sequential extraction analysis, CASA)을 사용하였다. 실험결과 중금속 아연의 농도가 저농도(50mg/L 미만)일 경우 자연지반에서의 분배양상은 주로 탄산염 형태로 존재하고, 또한 온도의 증가에 따라 탄산염 형태의 흡착량이 증가하는 것을 알 수 있다. 하지만 고농도(50mg/L 이상)의 경우 분배양상은 주로 이온교환형태로 존재한다는 것을 알 수 있다. 그러나 고농도에서의 이러한 분배형태는 온도의 증가에 따라 탄산염형태의 흡착량이 약 20%정도 증가하는 결과를 얻었다. 결론적으로 중금속 아연의 자연점토지반의 각 구성성분 별 흡착거동은 이온교환 형태를 제외하고 온도증가에 따라 증가하는 흡열반응(ΔH0>0)인 것으로 나타났고, 또한 고농도에서의 분배형태는 이온교환 형태에서 탄산염 형태로 변화되는 것을 알 수 있다. 그리고 이온교환 형태의 경우 온도변화에 따라 독립적인 거동을 보였다.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.44-44
• /
• 2001

구리(II)의 전자상자성공명 흉수선의 모양과 선 폭에 대한 해석을 통해 석영-물 계면에서의 구리(II) 및 흡착수와 석영 표면과의 상호 작용에 대해 연구하였다. 두 가지 흡수선이 중첩하여 흡수선을 구성하며 따라서 석영 표면에 적어도 두 종류의 구리(II)가 존재함을 알 수 있었다. 하나는 g=2.18에 중심을 둔 초미세 갈라짐이 분해되지 않는 등방성 단일 흡수선을 보여 주는 구리(II) 이온이다. 이는 수용액 중에서와 유사한 빠른 자유 회전 운동이 가능한 상태로 표면에 매우 약하게 결합된 구리 이온(Cu($H_2O$)$_{6}$$^{2+}$)인 것으로 해석된다. 다른 하나는 축 대칭 흡수선 $g_{∥}$=2.40, $g_{⊥}$=2.08)을 가지는 구리(II)로서 이는 표면에 강하게 결합된 것으로 해석된다. 본 결과는 흡착 현상에 대한 열역학적 접근법인 표면 착물화 모델들이 제시하는 광물 표면에서의 금속 이온 흡착 모델이 거시적 관점에서 흡착 현상을 잘 모사할지라도 분자 수준의 미시적 관점에서 흡착 메커니즘을 규명하기 위해서는 독립적인 분광학적 정보가 제시되어야함을 보여 준다.다.