• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.5
• /
• pp.40-49
• /
• 2010

Conical involute gears are being used for marine gearboxes, automotive transmissions, and robots, and so on, but not much. As involute profile gear, conical involute gear not only can be engaged with spur and helical gear but also can be used for power transmission of parallel, crossed and skewed axis with small angle. Hence, conical involute gears are likely to develop in future. Through a study on the basic theory of conical involute gear, tooth surface compressive stress analysis was performed by using commercial modeling program, comparing before and after profile modification. As a result, it noticed that tooth profile modification is able to relieve more tooth surface compressive stress than before modification.

• Korean journal of applied entomology
• /
• v.26 no.4 s.73
• /
• pp.269-272
• /
• 1987

Effects of dithane flowable and dithane M-45 on the control of opium poppy downy mildew were examined under field conditions. Application of these two fungicides significantly reduced the disease and increased latex yield, compared to other non-systemic fungicides.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2007.05a
• /
• pp.39-41
• /
• 2007

본 연구는 직물 기반 바이오 모니터링 스마트 의류를 개발하기 위해 의복 소재의 신축성에 따른 심전도 신호 검출 성능과 착용 성능을 평가하여 직물 기반 심전도 의복을 위한 최적 범위를 제안하고자 한다. 이를 위해, 서로 다른 신축률의 편물을 얻기 위해 면/폴리에스테르에 스판덱스 함유율을 0%, 5%, 8%로 다르게 하여 제편하였다. 이 세 가지 소재로 심전도 측정을 위해 동일한 사이즈로 의복을 제작한 후, 금속사를 이용한 자수 기법으로 심전도 전극을 설치하였다. 심장 관련 병력이 없고 평균 BMI가 $20{\sim}24$인 정상 체중의 5명을 대상으로 Biopac MP150을 사용하여 심전도 신호를 검출한 후, 설문지를 사용하여 소재의 신축성에 따른 착용성 평가를 시행하여 신축성에 대한 만족감, 동작용이성, 전반적 쾌적함 등을 Likert 7점 척도로 평가하도록 하였다. 실험 결과, 심전도 신호 검출 성능 측면에서는 8% 라이크라 함유 소재가 가장 우수하였으나, 착용성 측면에서는 5% 소재가 가장 우수한 것으로 파악되었다. 향후 그 수요가 높아질 것으로 예상되는 바이오 모니터링 의복 소재 개발을 위해 기능성과 착용성을 모두 고려한 본 연구 결과가 유용하게 활용될 것이다.

• Economic and Environmental Geology
• /
• v.11 no.4
• /
• pp.127-141
• /
• 1978

The major structures characteristic of the Taebaegsan sedimentary basin were regionally analyzed with special reference to its southeastern extension to the Yeonhwa-Ulchin district of economic interest in zinc-lead mineralization. The basin geometry, basement setting, sedimentary components, and the characteristics of deformation and igneous activity of the Taebaegsan basin differ basically from those of the adjacent mobile belt of the Ogcheon geosyncline, although the latter affected the basin's western side considerably. The subrectangular shape of the Taebaegsan basin reflects the checkered pattern of basement-block arrangement, and the carbonate-dominated lithologic components of the basin-fill indicate a cratonic depositional setting, which is comparable to some of the North American mid-continental craton. The Taebaegsan basin, however, has somewhat been less stable than the North American megacraton that is reflected in the former's thicker sedimentary fill and steeper faults of later deformation, showing a tendency to increase in thickness close to the basement-block boundaries, which may indicate contacts of possibly detached cratonic blocks of Precambrian age; these weak zones of block boundaries have been the loci of repeated sedimentation, deformation and related igneous intrusions. A series of downthrown or uplifted tilted blocks, in which the Cambro-Ordovician sedimentary wedges and the late Cretaceous to early Tertiary igneous intrusives are involved, occurs intermittently across the Yeonhwa-Ulchin district in a noticeable pattern of en echelon type. These sedimentary wedges are correlated to the Cambro-Ordovician section of the Hambaeg syncline to the west in stratigraphy and lithology, and are considered to have resulted from the northeastern and/or northwestern cross-faulting of the pre-existing syncline belt of easterly trend, extended from the main portion of the Hambaeg syncline. These structural junctions (or intersections) of the earlier syncline belt and the later cross-faults have been acted as a guide to ascending igneous materials and hydrothermal ore-forming fluids to form a zone of zinc-lead skarn deposits across the Yeonhwa-Ulchin district showing a stepwise recurrence of these deposits toward the east.

• Journal of the Korean Wood Science and Technology
• /
• v.6 no.1
• /
• pp.3-7
• /
• 1978

Quercus serrata degraded by Leminus edodes(berk) Singer was investigated. In order to evaluate on affect of the fungi on the sound logs, and the logs attacted for 2 years and five years were used as a sample tree. Large portions of carbohydrate mainly was decomposed by the fungy. It is supported by the increasing of alkaline extractives and the breaking up of crystallinity. Lignin is transformed considerably as shown the results of the determination of Klason lignin, gel filtration and nitrobezene oxidation. On the other hand, the decreasing of methoxyl group and the increasing of carboxyl group in parallel with demethlation and acidification are presented. Syringyl nuclei unit is decomposed easier than guaiacyl unit. It is also illustrated that the more decreasing of carboxyl group compared with aldehyde group was acidified biodegradation.

• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.19-27
• /
• 2019

Fire extinguishing composite materials based on low-viscosity epoxy resin (EP) and containing 50 wt% of encapsulated fire extinguishing agent (EFA) have been studied. The positive effect of the EP on the kinetics and temperature of the EFA decapsulation was established. The EP increases the decapsulation temperature of the EFA from 130 ℃ to 155 ℃ and changes the kinetics of the decapsulation. The epoxy matrix increases the thermal stability of the EFA more than 3.9 times compared to that of the pure EFA. The protective effect of the EP on the storage stability of the EFA was validated. The mass loss of EP-containing EFA at 60 ℃ and 80% humidity over 96 h is 0.4%. The mass loss of pure EFA under the same conditions is 15%. A similar effect was observed under ultraviolet radiation: the EP-containing EFA loses 0.8% at pure EFA mass of 6%. The testing of alternative polymer matrixes has been considered.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.483-488
• /
• 2007

Current feeder system (CFS) for Korea superconducting tokamak advanced research(KSTAR) project plays a role to interconnect magnet power supply (MPS) and superconducting (SC) magnets through the normal bus-bar at the room temperature(300 K) environment and the SC bus-line at the low temperature (4.5 K) environment. It is divided by two systems, i.e., toroidal field system which operates at 35 kA DC currents and poloidal field system wherein 20$\sim$26 kA pulsed currents are applied during 350 s transient time. Aside from the vacuum system of main cryostat, an independent vacuum system was constructed for the CFS in which a roughing system is consisted by a rotary and a mechanical booster pump and a high vacuum system is developed by four cryo-pumps with one dry pump as a backing pump. A self interlock and its control system, and a supervisory interlock and its control system are also established for the operational reliability as well. The entire CFS was completely tested including the reliability of local/supervisory control/interlock, helium gas leakage, vacuum pressure, and so on.

• The Transactions of the Korea Information Processing Society
• /
• v.13 no.2
• /
• pp.48-59
• /
• 2024

As functions that support virtualization on their own in hardware are developed, user applications having various workloads are operating efficiently in the virtualization system. SR-IOV is a virtualization support function that takes direct access to PCI devices, thus giving a high I/O performance by minimizing the need for hypervisor or operating system interventions. With SR-IOV, network I/O acceleration can be realized in virtualization systems that have relatively long I/O paths compared to bare-metal systems and frequent context switches between the user area and kernel area. To take performance advantages of SR-IOV, network resource management policies that can derive optimal network performance when SR-IOV is applied to an instance such as a virtual machine(VM) or container are being actively studied.This paper evaluates and analyzes the network performance of SR-IOV implementing I/O acceleration is compared with Virtio in terms of 1) network delay, 2) network throughput, 3) network fairness, 4) performance interference, and 5) multi-network. The contributions of this paper are as follows. First, the network I/O process of Virtio and SR-IOV was clearly explained in the virtualization system, and second, the evaluation results of the network performance of Virtio and SR-IOV were analyzed based on various performance metrics. Third, the system overhead and the possibility of optimization for the SR-IOV network in a virtualization system with high VM density were experimentally confirmed. The experimental results and analysis of the paper are expected to be referenced in the network resource management policy for virtualization systems that operate network-intensive services such as smart factories, connected cars, deep learning inference models, and crowdsourcing.