The spread of internet brought the rapid development of on-line shopping mall, but the information of clothing-related products especially underwears in on-line shopping mall is still poor. Thus, in this paper, we investigated the dimension status and problems of brassieres selling at on-line shopping malls and suggest improving solutions. We surveyed the sales sizes and sales status of brassieres for four top-sales on-line malls and analyzed them based on both of Korean Standards and SizeKorea2005, the measurement data of Korean women's sizes. The results showed that almost of brassieres were for adults(98.8%), and for general purpose(97.8%) while the sales rates of specially targeted products for teen-ager or functional products for nursing mom were very low. Also, we noticed that Korean Standards covers most of SizeKorea measurements of women, but brassieres of only a small portion of size in Korean Standards were manufactured and sold at on-line shopping mall. It means that consumers who do not belong to the sector of most frequent body measurement range suffer difficulties in purchase of brassieres by on-line shopping. Thus, it is required to gather more accurate information about body size of potential consumers and to offer wider range of sizes and target-specific products for the activation of on-line shopping.
This study was conducted to offer basic data that can be used in a clothing industry for active senior males that are emerging as a new consumer bracket in a rapid aging age. To this end, this study conducted an analysis of 'younger' older male body types based on data from the 6th Size Korea. As a result of the body type analysis of 'younger' older males who are considered active seniors in comparison to 'middle' aged males, the former's height items became shorter compared to 'middle' aged males, but circumference items were bigger. Males aged 35-69, who are 'middle' aged males and 'younger' old males were divided into three body types in this study: Type1- small body type with protruded belly, compared to weight. Type 2- body type of slim torso with wide shoulder-back widths. Type3- big body type overall with tall height and heavy weight. According to body type distribution by age group, the middle-aged males had Type2 body type the most. The younger-old males showed type1 the most. There is a need to reflect the body types of active senior male characteristics in apparel pattern design because the current fits are not appropriate if active senior males wear clothing targeted for males aged 30-50.
The purpose of this study is to analyze the body size and body characteristics of short-statured females in their 20s and 30s using direct measurement data from the 7th size Korea, and to analyze the differences in body dimensions and proportions between the regular and tall groups of short groups. The goal is to identify the dimension areas that need attention when designing and grading patterns for this short groups. As a result, it was found that the short group was shorter in height than the regular group, and the circumferential dimension was similar to the regular group. When designing patterns the tops, the grading of the Bust point-bust point is not necessary for the height, and it is not necessary to grade the Neck point to breast point in the short and regular group. These groups showed a difference in the front silhouette but not in the side silhouette. Based on these findings, the body types were classified into the following three types: 'most bulky and heavy', 'long lower body and small shoulder', and 'small and thin'. The type 1 population was the least distributed, and the relatively small and slim type was the most common. It is expected that the results of this study can be used as a reference when setting pattern designs, grading values, and production ratios by size for short women.
The purpose of this study is to classify the body types of obese men in their 50-60s and compare them with those of obese middle-aged men in their 30-40s. The 3D anthropometric data of obese men aged 50 to 60 years from the 6th Size Korea. The data are analyzed using SPSS 25.0 for Windows, and descriptive statistics, χ2 test, correlation analysis, and cluster analysis are used to classify obese body types. As a result of the study, five factors are extracted to determine body types, which are classified into three obese body types through cluster analysis. 1) a large physique and consequently large circumference and height; 2) A short upper body length, short height, and thick belly; 3) the lowest rate of obesity and relatively flat abdominal curve. For the 30-40s group, Type1 showed the highest rate at 55.6%, whereas for the 50s group, Type3 showed the highest rate at 49.3%, and for 60s group, Type2 showed the highest rate at 41.2%. The classification accuracy of the discriminant function for each type is 94.7%, indicating relatively high accuracy. Furthemore, the recently changed obese body type are analyzed by comparing it with the 3D anthropometric data of 8th Size Korea, which will contribute to the utilization of basic data for manufacturing apparel for obese men.
최근 헬스케어 분야에서 딥러닝을 활용한 다양한 사례가 증가하면서 웨어러블 기기를 통한 심전도 검사, 체성분 분석 등의 기능을 제공하여 합리적인 의사 결정을 제공하여 개인에게 맞는 프로세스를 제공할 수 있다. 딥러닝을 활용하기 위해서는 정제된 데이터 확보가 무엇보다 중요하며 이러한 데이터는 사람의 개입이나 비지도학습 등을 통해 이뤄지고 있다. 본 논문에서는 측정하기 쉬운 가슴둘레, 허리둘레와 같은 치수 데이터를 이용해 성별과 나이에 따른 군집별 비지도학습을 진행하고 이를 CNN으로 분류하는 모델을 제안한다. 데이터는 국가기술표준원에서 제공하고 있는 제7차 인체치수데이터를 활용하였다. 이를 통해 개인 맞춤형 체형관리 서비스나 비만 분석 등 다양한 응용 사례에 적용할 수 있을 것으로 사료된다.
This study purposed to analyze differences in body measurement between the 2D direct body measuring method and the 3D body scan measuring method and to perform the appearance evaluation and cross-sectional evaluation of the fit of pants to which body measurements obtained by each measuring method were applied. Body measuring was conducted in 10 women in their 20s-30s using 2D direct body measuring and 3D automatic measuring with Hamamatsu body scanner. Among the 10 women, 3 participated in experimental garment wearing. Experimental pants were made using their 2D direct body measurements and 3D automatic measurements, and wearing tests were performed through expert evaluation and cross-sectional evaluation. The results of the experiment were as follows. According to the results of comparative analysis on differences between 2D direct body measurements and 3D scan measurements, 3D automatic measurements were significantly larger in bust circumference, ankle circumference, armscye circumference, shoulder length, scye depth, and arm length. As circumferences measured with the 3D body scanner were somewhat larger than directly measured ones, it is suggested to adjust ease when using existing pattern making methods. We prepared experimental garments by the same pattern making method through applying body measurements obtained with the two measuring methods, and assessed the fit of the garment comparatively through expert evaluation and 3D scan cross-sectional evaluation. According to the results, 2D-pants using 2D direct body measurements was slightly tighter than 3D-pants using 3D measurements in waist circumference, hip circumference, and abdominal circumference. In the results of comparing appearance in terms of the fit of the experimental garment in each subject, significant difference was observed in most of the compared items. This result suggests that 3D automatic body measuring data may show different accuracy according to body shape and therefore it is necessary to examine difference between 2D direct body measurements and 3D automatic measurements according to body shape.
As aging society progresses, it is necessary to establish a housing standard that provides a healthy, safe, and convenient environment for the elderly. The objective of the study is to propose a housing space standard that is geared towards elderly living in the urban area. Three steps were taken to attain the objective. First, characteristics of housing preference, spatial usage and furniture preference of the elderly were attained through a survey. The survey was conducted targeting the respondents of the ages 60 to 79 living in three different administrative districts in Seoul. Second, the required floor space to perform individual specific behavior using anthropometric dimension of the elderly was investigated by literature review. Lastly, floor space of each space is suggested combining each area for individual specific behavior which reflects characteristics of housing preference and spatial usage. The results of the research as follows. A bedroom was planned, which includes the function of receiving guests by giving the area for the placement of a sofa. The space for the use of dinning table for two person was planned in the kitchen and The space for the behavior of showering on a chair was planned in a bathroom. Lastly, the space for the behavior of taking off shoes on a chair was considered in the entrance area. Consequently, $35.4m^2$ is suggested as the necessary floor space for the elderly housing considering the characteristics of the elderly in urban area. However, because of space composition and space for accessibility, the additional space should be considered to plan the elderly housing.
The purpose of this study is to analyze the pattern of the present flight suit, to select variables of human body and key dimensions for making pattern of the flight suit, and to decide the most appropriate size of human body and rate of ease for designing an overall flight suit. For analyzing the pattern of flight suit, we used "M95Special" (men ; chest circumference 92-97 cm ; height : above 177 cm), which was indicated as the standard of the Ministry of National Defense. We analyzed general appearance and the actual dimensions of the pattern of the flight suit. As a result of analyzing the pattern, flight suit was front-opened overall style which had a flat collar with rounded edges, two-pieced sleeves with lower height of the sleeve's cap, 3cm-width belt on the waist and 8 pockets. To decide the most appropriate size of human body, we selected 20 variables of human body in the 359 variables of the Size Korea by referring the previous studies. The 20 variables of human body were 9 circumferences (chest, waist, hip, neck, armscye, wrist, thigh, knee, and ankle), 9 lengths (stature, back interscye fold, waist back, crotch height, crotch, body rise, arm, outside leg and total), and 2 breadths (biacromial and chest). We drew out the size of 20 variables from the Size Korea and US Army anthropometry data and decided the most appropriate values from the drawn data for applying to the pattern of flight suit.
This study aims to use the avatar sizing system of the 3D apparel CAD program instead of the existing 3D body scanners, and to commercialize 3D personal avatars. Towards these ends, the study examined a difference between a 3D avatar and actual body was determined to verify the 3D avatar sizing system. For the experiment, three subjects were selected, were measured as they were, and were made to undergo 3D body scanning and photographing. Then, using avatar sizing system on the 3D apparel CAD program, three types of virtual bodies, namely 3D avatars. The 3D avatar and actual body measurements were compared, and 3D avatars and 3D body-scanned shapes were likewise compared. As a result, the three types of actual bodies and their 3D avatars that were created based on the sizing system of the 3D apparel CAD program were overall similar. but, the thin body-YY type and the normal body-A type were different from their avatars. In the case of type B, who had a bulging abdomen, the 3D avatar was bigger than the actual body as measured. Also, in all body shapes, the girths around the chest, waist and abdomen were produced with exaggerated muscular amounts compared to their actual muscular amounts.
The construction of athlete's tight-fitting garments by reducing the elastic knit pattern is an interesting subject, which directly influences the performance of the wearer. Therefore, relationships between the reduction rates of the men's pants pattern obtained using measurements of Size Korea 2004 and clothing fitting were explored to improve clothing comfort. Two pattern making methods were developed and the reduction rates were applied to those pants depending on the parts of human body. The four male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales during 4 consecutive days. While wearing the garments, subjects were kept four various postures including waist flexion and sitting etc by requests of the researchers. Likert type scale was used for the evaluation and 7 point indicates that it gave the best fit as tight-fitting pants. As results, differences in the length and girth between two piece pants pattern(style 1) and one piece pants pattern(style 2) were 0.0$\sim$0.3cm. Between two pattern making methods, one piece pants pattern(the style 2) was superior to two piece pants pattern in terms of subjective sensation and fit. Among eight tight-fitting pants, C, D, G, H pants were superior in terms of fitting and stability of waist and hip part to the others. ill case of tight-fitting pants, the reduction rate of the pattern in the course direction, the reduction rate of T2/3(66%) was better than that of T/2(50%), but the reduction rate of the pattern in the wale direction, that of the part of crotch, which was very sensitive part, should be kept the same as suggested earlier by Ziegert(1988).
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.