• Progress in Medical Physics
• /
• v.20 no.1
• /
• pp.43-50
• /
• 2009

The 4 bank mico-MLC (mMLC; Acculeaf, Direx, Isral) has been commissioned for clinical use of linac based stereotactic radiosurgery. The geometrical parameters to control the leaves were determined and comparisons between measured and calculated by the calculation model were performed in terms of absolute dose (cGy/100 MU). As a result of evaluating calculated dose for various field sizes and depths of 5 and 10 cm in water in the geometric condition of fixed SSD (source to surface distance) and fixed SCD (source to chamber distance), most of differences were within 1% for 6 MV and 15 MV x-rays. The penumbral widths at the isocenter were approximately evaluated to 0.29~0.43 cm depending on the field size for 6 MV and 0.36~0.51 cm for 15 MV x-rays. The average transmission and leakage for 6 MV and 15 MV x-rays were 6.6% and 7.4% respectively in single level of leaves fully closed. In case of dual level of leaves fully closed the measured transmission is approximately 0.5% for both 6 MV and 15 MV x-rays. Through the commissiong procedure we could verify the dose characteristics of mMLC and approximately evaluate the error ranges for treatment planning system.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.43-49
• /
• 2018

The aim of the research is to analyze the feasibility of rapid quality evaluation method for blast furnace slag using hydrometer based on the former research of the prediction method for concrete compressive strength using hydrometer. Using this method, it is expected to provide a new application for blast furnace slag quality evaluation easily and rapidly during the receiving inspection. According to the experimental results, the settling time period of hydrometer was delayed with increased fineness of blast furnace slag. By using the regression equation of y = 198 120 x - 193 936(R=0.9398) obtained from the correlation between density of suspension at three minutes and fineness, it was possible to evaluate the quality of blast furnace slag fineness rapidly. Therefore, for ready-mixed concrete receiving inspection, the suggested method can be used as a cheap, a simple, and a rapid inspection method.

• Journal of agricultural medicine and community health
• /
• v.34 no.1
• /
• pp.101-112
• /
• 2009

Objectives: Cattle slaughterhouse workers are known as the high risk group for the zoonoses. We surveyed the awareness of zoonoses among cattle slaughterhouse workers to suggest direction of education and public relations. Methods: We evaluated the epidemiological characteristics of zoonoses and the process of cattle slaughtering. We designed different questionnaires for the workers involved in slaughtering, the handlers of residual products, the inspectors and their assistants, and the grading testers and their assistants respectively. We visited 73 cattle slaughterhouses and 62 residual products handle houses across the country and conducted a questionnaire survey of the general characteristics and the awareness of zoonoses. The data collected was evaluated using the SPSS 17.0 statistical package. Results: The awareness rate of brucellosis, Q fever and Enterohemorrhagic Escherichia coli (EHEC) were 83.9%, 18.5%, 62.7% among cattle slaughterhouse workers. The awareness rate of zoonoses among the workers involved in slaughtering and the handlers of residual products was lower than other workers. The awareness rate of zoonoses tended to increase as the school career. In the correct awareness rate of the transmission of zoonoses, 'transmission by tick bite', 'person to person' and 'air transmission' were lower than other transmission items. The most common reason why cattle slaughterhouse workers think that it is difficult to prevent zoonoses was the ignorance of how to prevent. Conclusions: An educational program is needed for the cattle slaughterhouse workers on zoonoses especially Q fever. And publicity activities about prevention of infection are needed for high risk groups.

• Radioisotope journal
• /
• v.18 no.2
• /
• pp.39-42
• /
• 2003

• Nuclear industry
• /
• v.29 no.7
• /
• pp.58-60
• /
• 2009

시험 검사 인증 기술 컨설팅 분야의 세계적인 서비스 기업인 T$\ddot{U}$V S$\ddot{U}$D 그룹의 한국 법인인 T$\ddot{U}$V S$\ddot{U}$D Korea가 최근 원자력 기기 및 시스템 설계 엔지니어링 기업인 (주)GNEC를 인수, 합병하면서 국내 원자력 시장에 성큼 진출하는 한편 우리나라 원자력사업의 해외 시장 진출을 적극적으로 도울 계획을 세우고 있다. 라이너 블록 사장은 GNEC 인수 후 기자회견을 통해 "원자력 기기 및 설계, 교육 및 엔지니어링 서비스 등 관련 기술 지원에 앞장서 국내 에너지 산업의 활성화에 앞장서는 것을 물론 국내 원자력 산업의 해외 진출을 지원하면서 중국, 인도 및 중국 등 아시아 시장에 적극 진출할 것" 이라고 말하고 "원전 관련 기술을 갖고 있는 다른 기업에 대해서도 향후 인수 합병(M&A)에 나설 계획"이라고 밝혔다. T$\ddot{U}$V S$\ddot{U}$D Korea가 GNEC 인수를 마무리한 시점인 지난 10월 19일, 한강이 내려다보이는 여의도 대한생명 63빌딩 12층 T$\ddot{U}$V S$\ddot{U}$D Korea 사장실에서 라이너 블록 사장을 만났다. 인터뷰 자리에는 이번 GNEC 합병에 큰 역할을 한 김두일 T$\ddot{U}$V S$\ddot{U}$D 고문이 배석하여 인터뷰를 도왔다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.20-21
• /
• 2017

There have been reports in the media about some refineries that omit the refining process and deliver raw material for reasons of cost reduction, shortening of production time, etc. Also, in most RMC factories acceptance inspection is not conducted on account of issues with the proficiency of the equipment and cost issues; instead only scores are relied upon. Therefore this study sought to analyze the relation between the value of the density of FA actually delivered to RMC companies, attained with the Hydrometer method, and its fineness, to see whether the quality of FA can be evaluated statistically. Results led to the conclusion that there is a problem in terms of credibility in the fineness of FA shown on the test report. Upon analyzing the difference between the fineness of FA as measured using Blaine's air permeability method and its density of the Hydrometer method, the correlation was found to be satisfactory; therefore the possibility of a FA fineness quality evaluation could be proved as well.

• RED RIBBON
• /
• s.59
• /
• pp.5-5
• /
• 2004

질병관리본부 발표자료에 따르면 우리나라의 2004년 3월 현재, 에이즈 감염인은 2,679명에 이른다. 이중 남자가 2,406명으로 $89.8\%$를 차지하고 있으며, 여자는 273명으로 $10.2\%$를 차지하고 있다. 통계에서 보듯이, 남성 감염인수는 여성 감염인수의 8.8배나 많고 감염인 연령의 $62.2\%$는 $20\~30$대에 분포되어 있다. 감염경로의 $97.7\%$는 성접촉으로 인한 감염이다. 그러나 감염이 확인되지 않은 실제 감염인 수는 보편적으로 확인된 숫자의$5\~10$배까지 추정되고 있으며, 아직까지 검사를 받아보지 않은 감염예상자가 상당히 많을 것으로 추측된다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.11a
• /
• pp.231-232
• /
• 2008

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.05a
• /
• pp.325-326
• /
• 2010

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1992.04b
• /
• pp.605-614
• /
• 1992

초기단계의 제품 검사방법은 단순히 제품이 제대로의 기능을 수행하는지 안하는지에 대해서만 검사하고 결정을 내릴 뿐이었다. 대부분의 검사란, 검사자에게 최종적으로 제품이 인수된 후에 제품의 상태여부를 한정적이고, 제한적으로만 판단하여 검사결과를 제공하여왔다. 현대의 제품특성이 구조적 복잡성의 증가, 제품불량 현상파악의 난이도 증가등으로 제품의 사용절차, 검사, 유지보수, 부품교환등이 점점 더 난해해지고, 검사자의 개인적인 숙련도도 증가하게 되어, 제품을 유지보수하는데 더 많은 비용과 시간을 필요로하게 되었다. 이러한 문제들의 해결방안의 하나로 제품의 자체에 스스로 검사할 수 있는 체계적인 시스템을 설치하게 되어 BIT(Built-In-Test)가 탄생하게 되었다. BIT는 현존하는 제품뿐만아니라, 생산될 제품의 설계단계에서도 많이 응용되어 제품의 RAM(Reliability, Availability, Maintainability)에 많은 기여를 해왔다. 이 PAPER는 지금까지 BIT가 주로 Military System에 적용되어온 것을 Commercial system으로의 변환을 위한 기초작업을 제시하고 여러 대안을 열거하였으며, BIT가 갖고 있는 문제점들을 파악하여, 향후 고도화 되가는 산업사회의 요구에 부응할 수 있는 토대를 마련코자 Survey하였다.