• Microbiology and Biotechnology Letters
• /
• v.17 no.1
• /
• pp.19-23
• /
• 1989

A sequential system composed of hydroxylapatite chromatography and gel permeation chromatography was developed to purify the IgM type monoclonal antibody against the colon cancer cell SC-1 from the ascitic fluid of mice injected with the murine hybridoma CH07E02. In the hydroxylapatite chromatographic step the band dilution could be reduced by controlling the gradient and flow rate of the eluent, the sodium phospate buffer, the optimum values for these variables being 5.82$\times$10$^{-3}$M/cm and 0.2$m\ell/\textrm{cm}^2$/min, respectively. A degree of purity better than 99.99% as judged from silverstaining of the SDS-PAGE bands, was obtained by adding the gel permeation chromatographic step in tandem.

• Current Research on Agriculture and Life Sciences
• /
• v.6
• /
• pp.137-143
• /
• 1988

We studied suitable dough formula for yeast-raised breadmaking using frozen dough prepared by straight no-time method, centering around breadmaking quality. The most suitable dough formula based on 1,000 g of wheat flours was as follows : compressed yeast ; 30 g, sucrose ; 50 g, salt ; 20 g, shortening ; 40 g, potassium bromate ; 75mg, L-ascorbic acid ; 200mg, yeast food ; 3 g, vital wheat gluten ; 30 g, calcium phosphate, monobasic ; 400mg, sodium stearoyl-2-lactylate ; 8 g, water ; 680 g. Breadmaking test employing this formula showed that gassing power and fermentation time were suitable and higher specific loaf volume was obtainable. By using much emulsifiers and dough conditioners, frozen injury of dough was controlable in spite of the addition of more content of water(68%) than that of water (62%) obtained from the farinograph data.

• Journal of Power System Engineering
• /
• v.5 no.2
• /
• pp.71-78
• /
• 2001

Using sodium hypophosphite as reducing agent, bath composition and plating condition of electroless copper plating on plating rate have been studied. The followings were determined as optimum, bath composition; $CuSO_4\;0.025M,\;NiSO_4\;0.002M,\;NaH_2PO_2\;0.4M$, sodium citrate 0.06M, $H_3BO_3$ 0.6M, thiourea or 2-MBT $0.2mg/{\ell}$, and operation conditions; pH $9{\sim}10$ at bath temperature rage of $60{\sim}70^{\circ}C$. A small amount of nickel ion($Ni^{2+}/Cu^{2+}$=0.002/0.025) to the hypophosphite reduced solution promotes autocatalysis and continuous plating. An additive such as thiourea or 2-MBT of a small amount($0.2mg/{\ell}$) can be used to stabilize the solution without changing plating rate much. The attivation energy between $20^{\circ}C\;and\;70^{\circ}C$ were calculated to be 11.3kcal/mol for deposition weight. Plating reaction had been ceased by the adjustment of pH above 13, temperature higher than $90^{\circ}C\;and\;under\;20^{\circ}C$. Deposited surface became worse in the case of increment of bath temperature above $80^{\circ}C$.

• Journal of Veterinary Clinics
• /
• v.27 no.4
• /
• pp.453-456
• /
• 2010

A one-month-old, 0.9 kg BW, male Korean Sapsal dog with anorexia, anuria, ataxia and depression was referred. On physical examination, the dog was showed tachycardia, hypothermia and pale mucous membrane. Hematologic values showed leukocytosis and mild anemia. Serum chemistry profile results revealed increased BUN (57.3 mg/dl) and $NH_3$ ($584\;{\mu}g/dl$), decreased albumin, sodium and potassium. Urinalysis showed hematuria, proteinuria, glucosuria, bacteriuria (Staphylococcus spp.) and magnesium ammonium phosphate crystalluria. On radiographic finding, urinary bladder was enlarged and 2 mm diameter radiopaque urolith was showed between os penis and prescrotal region. Urolithiasis was surgically corrected by urethrostomy.

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.410-414
• /
• 2000

The feasibility of near infrared spectroscopy (NIRS) for the evaluation of the compost pro-duced by composting swine excreta has been investigated. The analytes determined were total nitrogen, total phosphorus, organic matter,total carbon,moisture, Cu, $K_2O$ and $Na_2O$. The ranges of concentration of the cal-ibration samples obtained by the conventional chemical method for each component were 1.30-2.75%, 1.45-4.86%, 7.36-81.5%, 23.0-41.1%, 4.2 the coefficient of variation was 4.38, 5.5, 3.2, 1.5, 10.9, 10.6 and 11.9% for total nitrogen, total phosphorus, organic matter, total carbon, moisture, Cu, $K_2O$ and $Na_2O$,respectively. The overall results showed that NlRS can be used for a non-destructive and rapid determination of the analytes to evaluate the quality of compost samples.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.184-188
• /
• 2007

Monodisperse PMMA/HDDA polymer particles were coated via electroless Ni plating using sodium hypophosphite as a reducing agent in an acidic environment. In this study, the effects of 1) the pretreatment conditions, 2) the plating temperature, 3) the plating pH, and 4) the initial pH, control of plating bath on the variation of plating rate, surface state of plated particles and plating reproducibility were investigated. It was observed that every pretreatment steps, especially conditioning and acceleration step, were very important for obtaining uniform Ni plating and the plating rate was increased with the increase of plating temperature and pH. Moreover, the initial pH control of plating bath was critical for the plating reproducibility.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.4
• /
• pp.225-229
• /
• 1993

The stability of omeprazole in the aqueous solutions containing arginine or sodium phosphate dibasic(SPD) was examined at 30, 40 and $50^{\circ}C$. Arginine or anhydrous SPD was added to omeprazoie solution ($200{\mu}g/\;ml$ in distilled water) to yield $100{\mu}g/\;ml$ concentration of each. Then, the solution was kept at 30, 40 or $50^{\circ}C$ for 90 hrs. Aliquots of the solution were withdrawn at specified time intervals and assayed by HPLC for intact omeprazole. The remaining percentage-time curves revealed that omeprazole was degraded rapidly as funtions of time and temperature following pseudo first-order kinetics. The rate constant in the SPD solution was much higher than in the arginine solution. In other words. the degradation half-lives of omeprazole at $30^{\circ}C$, for example, was 148 and 76 hr in arginine and SPD solutions respectively. The initial pH of the solution containing $100{\mu}g/\;ml$ of arginine or SPD was 9.7 or 8.7, respectively. Since omeprazole is more stable as the pH of its solution becomes more alkaline, the longer half-life of omeprazole in arginine solution could be explained by the more alkaline characteristics of arginine than SPD in the solution. The activation energy necessary for the degradation reaction was almost identical in both solutions, indicating similar degradation mechanisms of omeprazole in the solutions. In conclusion, omprazole was more stable in the presence of arginine than of SPD.

• 보존과학연구
• /
• s.32
• /
• pp.61-74
• /
• 2011

This study examines the removal effects of solvents which were applied on three adhesives and three filling materials for ceramics. The chosen materials are Cemedine C, Loctite$^{(R)}$ 401$^{TM}$, Araldite Rapid Type, plaster of paris, CDKI 520A+B, Araldit$^{(R)}$ SV427-2+HV427-1. For the first examination, each different materials were soaked into different solvents, and then the soften level were compared by compressive pressure. The result of the first exam showed that Cemedine C was dissolved easily in acetone. Furthermore Araldite, CDK and SV427 were soften efficiently by Dichloromethan, Tetrahydrofuran and DMX(Dichloromethan+Methanol+Xylene). However, Loctite and plaster were not able to make sample for the first test. Therefore, the second test carried on only. The second examination, chosen effective solvents from the first test were applied with two different methods; soaking and saturated atmosphere. Almost every sample could removed by soaking method in ten minutes, and saturated atmosphere method needs 24 hours for the safety.

• Journal of Surface Science and Engineering
• /
• v.52 no.5
• /
• pp.265-274
• /
• 2019

Formation behavior of PEO (Plasma Electrolytic Oxidation) films on AZ31 Mg alloy was investigated under application of 310 Hz AC as a function of $Na_3PO_4$ concentration from 0.02 M to 0.2 M. Film formation voltage and in-situ observation of arcs generated on the specimen surface were recorded with time, and surface morphologies of the PEO films were investigated using optical microscopy, confocal scanning laser microscopy and scanning electron microscopy. PEO film formation voltage decreased linearly with increasing $Na_3PO_4$ concentration which is attributed to the increase of solution pH. PEO films were grown uniformly over the entire surface in $Na_3PO_4$ solutions between 0.05 M and 0.1 M. However, non-uniform PEO films with white spots were formed in $Na_3PO_4$ solutions containing more than 0.1 M. Thickness and roughness of PEO films on AZ31 Mg alloy increased linearly with increasing $Na_3PO_4$ concentration and their increasing rates appeared to be much higher under 1 M than above 1 M. The experimental results suggest that phosphate ions can contribute to the formation of PEO films but higher $Na_3PO_4$ concentration more than 1 M results in local damages of PEO films due to repeated generation of white arcs at the same surface site of AZ31 Mg alloy.

• Journal of Surface Science and Engineering
• /
• v.53 no.6
• /
• pp.351-359
• /
• 2020

Formation behavior and properties of PEO (Plasma Electrolytic Oxidation) film on AA2024 were investigated under application of pulsed current as a function of Na3PO4 concentration in 0.05 M Na2SiO3 solution by analyzing voltage-time behavior, in-situ observation of arc generation, observation of surface morphology and measurements of thickness and surface roughness. Arc generation voltage decreased with increasing Na3PO4 concentration. Color difference of PEO films between edge and inner part disappeared by addition of Na3PO4. It was also observed that size of nodules on PEO film decreased with increasing Na3PO4 concentration. Thickness of PEO films formed on AA2024 increased with increasing Na3PO4 concentration. Whereas, surface roughness of PEO films decreased with increasing Na3PO4 concentration up to 0.05 M of Na3PO4 which is attributed to the deceased size of nodules on the PEO films. However, the surface roughness increased with increasing Na3PO4 concentration more than 0.07 M of Na3PO4 which seems to be due to the formation of non-uniform PEO films with smooth surface and large size pores formed by orange-colored big arcs. The experimental results suggest that added sodium phosphate less than 0.2 M in an alkaline silicate solution can contribute to the formation of relatively thick and uniform thickness of PEO films under arc generation voltage lower than 300 V.