• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.6
• /
• pp.455-463
• /
• 2021

The adsorption process using GAC is one of the most secured methods to remove of phosphate from solution. This study was conducted by impregnating Cu(II) to GAC(GAC-Cu) to enhance phosphate adsorption for GAC. In the preparation of GAC-Cu, increasing the concentration of Cu(II) increased the phosphate uptake, confirming the effect of Cu(II) on phosphate uptake. A pH experiment was conducted at pH 4-8 to investigate the effect of the solution pH. Decrease of phosphate removal efficiency was found with increase of pH for both adsorbents, but the reduction rate of GAC-Cu slowed, indicating electrostatic interaction and coordinating bonding were simultaneously involved in phosphate removal. The adsorption was analyzed by Langmuir and Freundlich isotherm to determine the maximum phosphate uptake(q_m) and adsorption mechanism. According to correlation of determination(R²), Freundlich isotherm model showed a better fit than Langmuir isotherm model. Based on the negative values of q_m, Langmuir adsorption constant(b), and the value of 1/n, phosphate adsorption was shown to be unfavorable and favorable for GAC and GAC-Cu, respectively. The attempt of the linearization of each isotherm obtained very poor R². Batch kinetic tests verified that ~30% and ~90 phosphate adsorptions were completed within 1h and 24 h, respectively. Pseudo second order(PSO) model showed more suitable than pseudo first order(PFO) because of higher R². Regardless of type of kinetic model, GAC-Cu obtained higher constant of reaction(K) than GAC.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.6
• /
• pp.375-382
• /
• 2023

The binary oxide adsorbent using Fe and Mn (Fe-Mn) has been prepared by precipitation method to enhance the removal of phosphate. Different amounts of chitosan, a natural organic polymer, were used during preparation of Fe-Mn as a stabilizer to protect an aggregation of Fe-Mn particles. The optimal amount of chitosan has been determined considering the separation of the Fe-Mn particles by gravity from solution and highest removal efficiency of phosphate (Fe-Mn10). The application of Fe-Mn10 increased removal efficiency at least 15% compared to bare Fe-Mn. According to the Langmuir isotherm model, the maximum uptake (q_m) and affinity coefficient (b) were calculated to be 184 and 240 mg/g, and 4.28 and 7.30 L/mg for Fe-Mn and Fe-Mn10, respectively, indicating 30% and 70% increase. The effect of pH showed that the removal efficiency of phosphate was decrease with increase of pH regardless of type of adsorbent. The enhanced removal efficiency for Fe-Mn10 was maintained in entire range of pH. In the kinetics, both adsorbents obtained 70% removal efficiency within 5 min and 90% removal efficiency was achieved at 1 h. Pseudo second order (PSO) kinetic model showed higher correlation of determination (R²), suggesting chemisorption was the primary phosphate adsorption for both Fe-Mn and Fe-Mn10.

• Clean Technology
• /
• v.25 no.2
• /
• pp.129-139
• /
• 2019

Bamboo is an evergreen perennial plant, and it is known as one of the most productive and fastest-growing plants in the world. It grows quickly in moderate climates with only moderate water and fertilizer. Traditionally in Asia, bamboo is used for building materials, as a food source, and as versatile raw materials. Bamboo as a biomass feedstock can be transformed to prepare activated carbon using the thermal treatment of pyrolysis. The effect of process variables such as carbonization temperature, activation temperature, activation time, the amount of steam, and the mixing ratio of phosphoric acid and bamboo were systematically investigated to optimize the preparation conditions. Steam activation was proceeded after carbonization with a vapor flow rate of $0.8{\sim}1.8mL-H_2O\;g-char^{-1}\;h^{-1}$ and activation time of 1 ~ 3 h at $700{\sim}900^{\circ}C$. Carbon yield and surface area reached 2.04 ~ 20.59 wt% and $499.17{\sim}1074.04m^2\;g^{-1}$, respectively, with a steam flow rate of $1.4mL-H_2O\;g-char^{-1}\;h^{-1}$ for 2 h. Also, the carbon yield and surface area were 24.67 wt% and $1389.59m^2\;g^{-1}$, respectively, when the bamboo and phosphoric acid were mixed in a 1:1 weight ratio ($700^{\circ}C$, 2 h, $1.4mL-H_2O\;g-char^{-1}\;h^{-1}$). The adsorption of methylene blue into the bamboo activated carbon was studied based on pseudo first order and second order kinetics models. The adsorption kinetics were found to follow the pseudo second order model, which is governed by chemisorption.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.4
• /
• pp.29-38
• /
• 2001

In this study, the fractional composition and the releasing of nutrients and metals from sediments of Boryung reservoir were investigated. Based on present study, the forms of sediment phosphorus of the four sites in reservoir were classified as adsorbed phosphorus, non apatite inorganic phosphorus(NAI-P), apatite phosphorus and residual phosphorus. Residual phosphorus showed the highest fration, NAI-P second, apatite phosphorus third and absorbed phosphorus fourth. The sedimentation rate of T-P and T-N in aerobic condition were $0.31mg/m^2{\cdot}day$ and $29mg/m^2{\cdot}day$. The sedimentation rate of T-P and T-N in anaerobic condition were $0.12mg/m^2{\cdot}day$ and $13.6mg/m^2{\cdot}day$. The releasing rate of T-P and T-N in anaerobic condition were $0.23mg/m^2{\cdot}day$ and $10.5mg/m^2{\cdot}day$.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.1-5
• /
• 1999

The dispersing performance of oligomer-type anionic surfactants ($C_mD-Na$), cooligomers of diethylester maleate and alkylvinylether of different alkyl chain lengths or polymerization degree were studied on the aqueous suspension of iron dxide or titanium dioxide particles which are hydrophilic pigments. The dispersion behavior of oligomer-type surfactants for these dispersoids, although anion charges on the surface of pigments particles showed different dispersing properties, was dependent upon the side alkyl chain length. Oligomer-type surfactants having more than $C_8$ side alkyl chain exhibited large dispersing action for relatively hydrophobic ${\alpha}-Fe_2O_3$ and Anatase $TiO_2$ in the concentration range of more than 0.1% oligomer-type surfactant solutions.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.210-216
• /
• 2006

To use the filter materials for selective removal of carbonyl compounds in cigarette mainstream smoke, hydrazine such as 2,4-dinitrophenylhydrazine (2,4-DNPH) and dansylhydrazine (DAH) impregnated adsorbents were prepared with perchloric acid or phosphoric acid as an accelerator in hydrazone formation reaction. Changes of molecular structure and morphology of adsorbents in various of impregnator were investigated by FTIR/ATR and SEM. Impregnation amount caused by reaction time, acid type and impregnation reagent, and the adsorption properties of carbonyl compounds in cigarette mainstream smoke were studied. Amounts of impregnation increased with increasing reaction time. The removal amount for vapor phase carbonyl compounds by 2,4-DNPH impregnated adsorbent was higher than that of dansylhydrazine impregnated adsorbent. The selectivity of 2,4-DNPH impregnated polyacrylic type adsorbent was superior to those of other adsorbents. This result indicates that the 2,4-DNPH impregnated polyacrylic adsorbent is applicable to cigarette filter material because of its fast reactivity and porosity.

• Journal of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.300-305
• /
• 1981

The soy bean oil cakes and perillar oil cakes are phosphorylated and sulfonated to be used as ion exchangers. There 40-60mesh cations exchanges have bean tested on the capacity of ion exchange, the adsorption and distribution coefficients of several metal ions in various concentrations of binary solution mixture, hydrochloric acid and alcohol. From there experiments, the following results are concluded. The ion exchange capacity of ion exchangers are higher than 4 meq/g. The adsorption of metal ions on ion exchangers are increased generally as pH is increased, especially Co(II) on sulfonated soy bean oil cake. The distribution coefficients of various metal ions are decreased as the number of branches of carbon and hydroxyl groups are increased. There show that the stereo-isomerism of alkyl group or attraction of ligand have influenced upon various metal ions. Consequently it is deduced that there ion exchanges from soy bean oil cake and perillar oil cake resemble in properties to current ion exchangers.

• Journal of Wetlands Research
• /
• v.7 no.4
• /
• pp.43-50
• /
• 2005

Wetlands can transform or remove pollutants from water body, such as nitrogen, phosphate, and organics. Many researches were conducted in relation to uptake process by aquatic plants in wetlands. However, water purification processes in wetlands are the results of physical, chemical and biological, especially microbiological reactions. As such, understanding on microbial processes is of great importance. In this study, we used pondor marsh-type wetland microcosms for investigating the water purification capacity and microbial functions, namely, extracellular enzyme activities, nitrification and denitrification. In a pond system, removal efficiencies of $NO_3{^-}$ and $PO{_4}^{3-}$ were 96% and 100 % respectively, while those in a marsh system were 94%, 100% respectively. These high removal efficiencies appeared to be caused by high adsorption ability to soils and microbial functions in wetland.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.3
• /
• pp.123-128
• /
• 2013

Organic carbons such as methanol, ethanol, iso-propanol, methoxy ethanol, glucose are added(1, 2, 3%) in the 2000 ppm $NH_3$ and $H_3PO_4$. As vol.%. cyclic voltammetry measurement of the capacity with the addition of organic carbon, the results of $NH_3$ + 3 vol.% Methanol Addition, $H_3PO_4$ + 2 vol.% iso-propanol addition of the increase in capacity was observed. Applying to the CDI Module cell with an addiction of organic carbon is confirm that remove $NH_4$-N and $PO_4$-P in sewage. Namely, the removal efficiency of $NH_3$ was increase of 16.4% during adsorption, 30.4% during desorption and the removal efficiency of $H_3PO_4$ was increase of 63% during adsorption, 54.7% during desorption. Therefore, the result of this research is confirm that effect of the N, P removal and considered that reduction of the operating costs without removing the organic matter in the influent wastewater.

• Korean Journal of Food Science and Technology
• /
• v.12 no.2
• /
• pp.126-132
• /
• 1980

An attempt was made to remove red color and capsaicin which were contaminated in crude oil extracted from red pepper seeds with n-hexane. Both clay bleachidg and deodorization were responsible for the removal of red color. Clay bleaching was also the most effective for the removal of capsaicin, which was removed completely with 4 % clay. Capsaicin in oil was adsorbed onto the clay particles exponentially and it followed Freundlich equation : ${\frac{x}{m}}=1.1\;c^{0.31}$, where x is amount of capsaicin adsorbed (mg/ml), m is amount of clay used in bleaching (%) and c is amount of residual capsaicin (mg/ml). Neutral lipid of the seed oil consisted of 95.8 % triglyceride, 1.55 % sterol ester, 1.45 % monoglyceride, 0.78 % free fatty acids, 0.2 % diglycerides and 0.15 % sterol. Major components of fatty acids in the red pepper seed oil were linoleic acid (78.79 %), palmitic acid (15.27 %) and linolenic acid content was only 0.63 % by high performance liquid chromatography.