• Resources Recycling
• /
• v.26 no.4
• /
• pp.50-55
• /
• 2017

Determination of trace elements in a sample including complicated matrix is very difficult due to the interference by the matrix. Therefore, if the trace elements can be separated from the complex sample matrix and determined, the interference effects can be reduced, and it is very helpful for the overall analysis. In this study, the analytes of trace elements were separated from the sample matrix by co-precipitation with trace elements using indium hydroxide ($In(OH)_3$), then detected by inductively coupled plasma-atomic emission spectrometer (ICP-AES). Above all, the optimal conditions for the co-precipitation of elements with indium hydroxide were experimentally established. At last, salt was analyzed by the developed analytical method. No heavy metals were not found in Shinan Jeungdo salt, but trace amounts of several heavy metals except for cadmium were found in Cheonnam Yongkwang salt.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.63-67
• /
• 2014

Gallium is an important material and is used by industry of oxide semi-conductor and LED chip. However, the most of the gallium-containing waste resources became outflow abroad and the most of which is imported from oversea by following technical problem and low circulation rate. In this research, the recovery of high purity Gallium metal from Gallium scrap, which containing about 30% of Gallium, was investigated by using hydro-metallurgical process. As pretreatment, the Gallium scrap was pulverized and leached by strong acid such as hydro chloric acid. At the leached solution, Indium was separated as an Indium sponge by substitution reaction and then Gallium and Zinc hydroxide separated and filtrated using strong alkaline solution such as sodium hydroxide by precipitation method. Also, Gallium metal and Zinc metal was recovered by electrowinning method. To make an electrolytic solution, Gallium and Zinc hydroxide was leached by strong alkaline solution. Finally, High purity Gallium metal was recovered by vacuum refining process to remove the Zinc impurity.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.705-716
• /
• 2017

In this study, Indium-Titanium hydroxide particle with 0.5, 1.0, 1.5 wt% of $TiO_2$ were synthesized by sol process and adding the base, ITiO(Indium Titanium Oxide) particles were obtained by gelling at $200^{\circ}C$ and $500^{\circ}C$. The ITiO particle's size with gel process at $200^{\circ}C$ was smaller than ITiO particle's size with gel process $500^{\circ}C$. The ITiO particle with gel process at $200^{\circ}C$ was used to fabricate dense ITiO target. ITiO targets with 0.5, 1.0, 1.5 wt% of $TiO_2$ were fabricated and used to obtain ITiO thin films onto glass by sputtering. Among those sputtered ITiOs' thin films, ITiO thin film with 0.4 % of $O_2$ and 0.5 wt% of $TiO_2$ showed the lowest specific resistance, highest charge mobility and lowest carrier concentration. It was found the light transmittance of the ITiO film were increased highly compared to light transmittance of ITO (Indium Tin Oxide) thin film over Infrared wavelength ranges.