• The Journal of Korea Robotics Society
• /
• v.6 no.3
• /
• pp.220-229
• /
• 2011

This paper focuses on a development of an anthropomorphic robot hand. Human hand is able to dexterously grasp and manipulate various objects with not accurate and sufficient, but inaccurate and scarce information of target objects. In order to realize the ability of human hand, we develop a robot hand and introduce a control scheme for stable grasping by using only kinematic information. The developed anthropomorphic robot hand, KITECH Hand, has one thumb and three fingers. Each of them has 4 DOF and a soft hemispherical finger tip for flexible opposition and rolling on object surfaces. In addition to a thumb and finger, it has a palm module composed the non-slip pad to prevent slip phenomena between the object and palm. The introduced control scheme is a quitely simple based on the principle of virtual work, which consists of transposed Jacobian, joint angular position, and velocity obtained by joint angle measurements. During interaction between the robot hand and an object, the developed robot hand shows compliant grasping motions by the back-drivable characteristics of equipped actuator modules. To validate the feasibility of the developed robot hand and introduced control scheme, collective experiments are carried out with the developed robot hand, KITECH Hand.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.6
• /
• pp.594-599
• /
• 2006

In this paper an anthropomorphic robot hand called SKKU Hand IIl is presented, which has a miniaturized fingertip tactile sensor. The thumb is designed as one part of the palm and multiplies the mobility of the palm. The fingertip tactile sensor, based on polyvinylidene fluoride (PVDF) and pressure variable resistor ink, is physically flexible enough to be deformed into any three-dimensional geometry. In order to detect incipient slip, a PVDF strip is arranged along the direction normal to the surface of the finger of the robot hand. Also, a thin flexible sensor to sense the static force as well as the contact location is fabricated into an arrayed type using pressure variable resistor ink. The driving circuits and the tactile sensing systems for the SKKU Hand II are embedded in the hand. Each driving circuit communicates with others using CAN protocol. SKKU Hand II is manufactured and its feasibility is validated through preliminary experiments.

• The Journal of the Korea Contents Association
• /
• v.22 no.5
• /
• pp.305-318
• /
• 2022

We focused on the care effectiveness of the interactive AI robots. developed an AI toy robot called 'Agaya' to contribute to personalization with more human-centered care. First, by applying P-TTS technology, you can maximize intimacy by autonomously selecting the voice of the person you want to hear. Second, it is possible to heal in your own way with good memory storage and bring back memory function. Third, by having five senses of the role of eyes, nose, mouth, ears, and hands, seeking better personalised services. Fourth, it attempted to develop technologies such as warm temperature maintenance, aroma, sterilization and fine dust removal, convenient charging method. These skills will expand the effective use of interactive robots by elderly people and contribute to building a positive image of the elderly who can plan the remaining old age productively and independently

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.487-490
• /
• 2004

상황 인식(context-awrare)은 인간-컴퓨터 상호작용의 단점을 극복하기 위한 방법으로써 많은 주목을 받고 있다. 이 논문에서는 SoC(System-on-a-Chip)로 구현될 수 있는 상황 인식 시스템 구조를 제안한다. 제안한 구조는 센서 추상화, 컨텍스트 변경에 대한 통지 메커니즘, 모듈식 개발, if-then규칙을 이용한 쉬운 서비스 구성과 유연한 상황 인식 서비스 구현을 지원한다. 이 구조는 통신 모듈, 처리 모듈, 블랙보드를 포함하는 SoC 마이크로프로세서 부분과 규칙 기반 시스템 모듈을 구현한 하드웨어로 구성된다. 규칙 기반 시스템 하드웨어는 모든 규칙의 조건부에 대해 매칭 연산을 병렬로 수행하고, 규칙의 결론부는 마이크로프로세서에 내장된 행위 모듈을 호출함으로써 작업을 수행한다. 제안한 구조의 SoC 시스템은 SystemC SoC 개발 환경에서 설계되고, 성공적으로 테스트되었다. 제안한 SoC 기반의 상황 인식 시스템 구조는 주거 환경에서 컨텍스트를 인식하여 노인을 보조하는 지능형 이동 로봇 등에 적용될 수 있을 것으로 기대된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1824-1832
• /
• 2011

In this paper, a smart home service robot McBot II is newly developed in much more practical and intelligent system than McBot I which we had developed a few years ago. Thus far, vacuum-cleaners have lightened the burden of household chores but the operational labor that vacuum-cleaners entail has been very severe. Recently, a cleaning robot was commercialized to solve but it also was not successful because it still had the problem of mess-cleanup, which pertained to the clean-up of large trash and the arrangement of newspapers, clothes, etc. Hence, we develop a new home mess-cleanup robot McBot II to completely overcome this problem on real environments. The mechanical design and the basic control of McBot II, which performs mess-cleanup function etc. in house, is actually focused in this paper. McBot II is mechanically modeled in the same method that the human works in door by using the waist and the hands. The big-ranged vertical lift and the shoulder joints to be able to forward move are mechanically designed for the operating function as the human's waist when the robot works. The mobility of McBot II is designed in the holonomic mobile robot for the collision avoidance of obstacle and the high speed navigation on the small area in door. Finally, good performance of McBot II, which has been optimally desinged, is confirmed through the experimental results for the control of the robotic body, mobility, arms and hands in this paper.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.143-143
• /
• 2017

산업이 고도화됨에 따라 자동화 기계 및 로봇에 의해 대량 생산 되는 품목과 달리, 작업 절차의 비정형성, 비연속성 등으로 인해 여전히 농업에 많은 인력이 투입되고 있다. 국제노동기구에 따르면, 세계 인력의 절반이 농업 인력에 해당하고 작업 중 부상이나 사망 등으로 인해 가장 위험한 직업군 중 하나에 해당하는 것으로 나타났다. 시설 재배 농업의 경우, 노동집약적인 온실 내 작업 특성상 잘못된 자세로 작업하거나 지나친 작업량 등으로 인해 작업자에게 근골격계 질환이 발생할 수 있다. 근골격계 질환으로 인해 작업효율이 감소하거나 생산비용의 증가로 이어질 수 있으며, 농가 수익에 손실이 발생할 수 있다. 이에 본 연구에서는 현행 시설 재배 농업에서 사용되는 레일 전동 작업차를 이용하여 작업자가 토마토를 수확할 때의 신체에 대한 농작업의 부하를 평가하고자 하였다. 작업차를 이용한 주요 작업 절차는 작물로부터 과실 수확, 과실 상자에 과실 투입, 빈 과실 상자와 가득 찬 과실 상자의 교대, 작업차 위의 과실 상자를 운반용 파레트에 하역하는 순서로 이루어지는 것을 확인하였다. 비디오장비로 촬영된 일련의 농작업 과정을 OWAS, RULA, REBA와 같은 체크리스트형 인간공학적 작업 부하 평가 도구를 이용하여 평가한 결과, 기존 레일 전동 작업차를 이용한 농작업의 근골격계 질환 유발 가능성을 확인하였다. 동작별 위험성을 토대로 근골격계 질환 유발 가능성이 높아 개선이 필요한 농작업 동작을 선정하였다. 선정된 동작은 실험실 내 환경에서 피실험자를 통한 모의 동작의 생체 신호 계측을 통해 신체 부하 정도를 정량적으로 측정할 수 있으며, 보조가 필요한 신체 부위를 특정하거나 안전성 확보가 필요한 동작에 대한 증거가 될 수 있다. 본 연구를 통해 향후 토마토 온실 내 신선도 유지를 위한 레일 전동 작업차의 개발에 작업자의 안전과 효율성 향상을 위한 인간공학적 설계를 적용할 수 있을 것으로 기대한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.512-516
• /
• 2004

Context-aware computing has been attracting the attention as an approach to alleviating the inconvenience in human-computer interaction. This paper proposes a context-aware system architecture to be implemented on an SoC(System-on-a-Chip). The proposed architecture supports sensor abstraction, notification mechanism for context changes, modular development, easy service composition using if-then rules, and flexible context-aware service implementation. It consists of the communication unit, the processing unit, the blackboard, and the rule-based system unit, where the first three components reside in the microprocessor part of the SoC and the rule-based system unit is implemented in hardware. For the proposed architecture, an SoC system has been designed and tested in an SoC development platform called SystemC and the feasibility of the behavoir modules for the microprocessor part has been evaluated by implementing software modules on the conventional computer platform. This SoC-based context-aware system architecture has been developed to apply to mobile intelligent robots which would assist old people at home in a context-aware manner.