• Industry Promotion Research
• /
• v.9 no.2
• /
• pp.37-44
• /
• 2024

This study selected the worst-case scenario for fireball and vapor cloud explosion (VCE) of a styrene monomer storage tank installed in a petrochemical production plant and performed damage prediction and accident impact analysis. The range of influence of radiant heat and overpressure due to fireball and vapor VCE during the abnormal polymerization reaction of styrene monomer, the main component of the mixed residue oil storage tank, was quantitatively analyzed by applying the e-CA accident damage prediction program. The damage impact areas of radiant heat and explosion overpressure are analyzed to have a maximum radius of 1,150m and 626m, respectively. People within 1,150m of radiant heat of 4kW/m2 may have their skin swell when exposed to it for 20 seconds. In buildings within 626m, where an explosion overpressure of 21kPa is applied, steel structures may be damaged and separated from the foundation, and people may suffer physical injuries. In the event of a fire, explosion or leak, determine the risk standards such as the degree of risk and acceptability to workers in the work place, nearby residents, or surrounding facilities due to radiant heat or overpressure, identify the hazards and risks of the materials handled, and establish an emergency response system. It is expected that it will be helpful in establishing measures to minimize damage to workplaces through improvement and investment activities.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.4
• /
• pp.303-314
• /
• 2024

Recently, the consecutive shield tunnel boring machine (TBM) has gained attention for its potential to enhance TBM penetration rates. However, its development requires a thorough risk assessment due to the unconventional nature of its equipment and hydraulic systems, coupled with the absence of design or construction precedents. This study investigated the causal relationships between four accidents and eight relevant sources associated with the consecutive shield TBM. Subsequently, risk levels were determined based on expert surveys and a risk matrix technique. The findings highlighted significant impacts associated with collapses or surface settlements and the likelihood of causal combinations leading to misalignment. Specifically, this study emphasized the importance of proactive mitigation measures to address collapses or surface settlements caused by inadequate continuous tail void backfill or damaged thrust jacks. Furthermore, it is recommended to develop advanced non-destructive testing technology capable of comprehensive range detection across helical segments, to design a sequential thrust jack propulsion system, and to determine an optimal pedestal angle.

• Journal of forensic and investigative science
• /
• v.1 no.2
• /
• pp.5-19
• /
• 2006

Data mining is an information extraction activity to discover hidden facts contained in databases. Using a combination of machine learning, statistical analysis, modeling techniques and database technology, data mining finds patterns and subtle relationships in data and infers rules that allow the prediction of future results. Typical applications include market segmentation, customer profiling, fraud detection, evaluation of retail promotions, and credit risk analysis. Law enforcement agencies deal with mass data to investigate the crime and its amount is increasing due to the development of processing the data by using computer. Now new challenge to discover knowledge in that data is confronted to us. It can be applied in criminal investigation to find offenders by analysis of complex and relational data structures and free texts using their criminal records or statement texts. This study was aimed to evaluate possibile application of data mining and its limitation in practical criminal investigation. Clustering of the criminal cases will be possible in habitual crimes such as fraud and burglary when using data mining to identify the crime pattern. Neural network modelling, one of tools in data mining, can be applied to differentiating suspect's photograph or handwriting with that of convict or criminal profiling. A case study of in practical insurance fraud showed that data mining was useful in organized crimes such as gang, terrorism and money laundering. But the products of data mining in criminal investigation should be cautious for evaluating because data mining just offer a clue instead of conclusion. The legal regulation is needed to control the abuse of law enforcement agencies and to protect personal privacy or human rights.

• Journal of the Korean Geographical Society
• /
• v.29 no.4
• /
• pp.420-437
• /
• 1994

The starting point of the research is the relation between capital restructuring and urban restructuring. The economic restructuring, which has been caused by the economic crisis in the early 1970s in the United States has brought a spatial restructuring at different geographic scales. The degree of the success of urban restructuring is contingent to the local economic and political environments. The local contingent factor such as local politics should not be neglected for investigating the restructuring process. Through the case study of Chicago, the research provides two inconsistencies in applying the structural approach to the local level: first, the lack of the theoretical link between crisis and restructuring; and second, the crucial importance of local politics in shaping urban development.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.592-600
• /
• 1997

Background : The level of imposed work of breathing (WOB) is important for patient-ventilator synchrony and during weaning from mechanical ventilation. Triggering methods and the sensitivity of demand system are important determining factors of the imposed WOB. Flow triggering method is available on several modern ventilator and is believed to impose less work to a patient-triggered breath than pressure triggering method. We intended to compare the level of imposed WOB on two different methods of triggering and also at different levels of sensitivities on each triggering method (0.7 L/min vs 2.0 L/min on flow triggering ; $-1\;cmH_2O$ vs $-2cm\;H_2O$ on pressure triggering). Methods : The subjects were 12 patients ($64.8{\pm}4.2\;yrs$) on mechanical ventilation and were stable in respiratory pattern on CPAP $3\;cmH_2O$. Four different triggering sensitivities were applied at random order. For determination of imposed WOB, tracheal end pressure was measured through the monitoring lumen of Hi-Lo Jet tracheal tube (Mallincrodt, New York, USA) using pneumotachograph/pressure transducer (CP-100 pulmonary monitor, Bicore, Irvine, CA, USA). Other data of respiratory mechanics were also obtained by CP-100 pulmonary monitor. Results : The imposed WOB was decreased by 37.5% during 0.7 L/min on flow triggering compared to $-2\;cmH_2O$ on pressure triggering and also decreased by 14% during $-1\;cmH_2O$ compared to $-2\;cmH_2O$ on pressure triggering (p < 0.05 in each). The PTP(Pressure Time Product) was also decreased significantly during 0.7 L/min on flow triggering and $-1\;cmH_2O$ on pressure triggering compared to $-2\;cmH_2O$ on pressure triggering (p < 0.05 in each). The proportions of imposed WOB in total WOB were ranged from 37% to 85% and no significant changes among different methods and sensitivities. The physiologic WOB showed no significant changes among different triggering methods and sensitivities. Conclusion : To reduce the imposed WOB, flow triggering with sensitivity of 0.7 L/min would be better method than pressure triggering with sensitivity of $-2\;cm\;H_2O$.

• Progress in Medical Physics
• /
• v.17 no.3
• /
• pp.179-186
• /
• 2006

Purpose: Photon beam data of linear accelerators in Korea are collected, analyzed, and a simple method for checking and verifying the dose calculations in a TPS are suggested. Materials and Methods: Photon beam data such as output calibration condition, output factor, wedge factor, percent depth dose, beam profile, and beam quality were collected from 26 institutions in Korea. In order to verify the accuracy of dose calculation, ten sample planning tests were peformed. These Include square, elongated, and blocked fields, wedge fields, off-axis dose calculation, SSD variation. The planned data were compared to that of manual calculations. Results: The average and standard deviation of photon beam quality for 6, 10, and 15 MV were $0.576{\pm}0.005,\;0.632{\pm}0.004,\;and\;0.647{\pm}0.006$, respectively. The output factors of 6 MV photon beam measured at depth of dose maximum for $5{\times}5cm,\;15{\times}15cm,\;20{\times}20cm\;were\;0.944{\pm}0.006,\;1.031{\pm}0.006,\;and\;1.055{\pm}0.007$. For 10 MV photon beam, the values were $0.935{\pm}0.006,\;1.031{\pm}0.007,\;1.054{\pm}0.0005$. The collected data were not enough to calculate average, the output factors for 15MV photon beam with field size of $5{\times}5cm,\;15{\times}15cm,\;20{\times}20cm\;were\;0.941{\pm}0.008,\;1.032{\pm}0.004,\;1.049{\pm}0.014$. There was seven institutions $e{\times}ceeding$ tolerance when monitor unit values calculated from treatment planning system and manually were compared. The measured average MU values for the machines calibrated at SAD setup were 3 MU and 5 MU higher than the machines calibrated at SSD for 6 MV and 10 MV, respectively except the wedge case. When the wedges were inserted, the MU values to deliver 100 cGy to 5 cm depends on manufactures. When the same wedge angle was used, Siemens machine requires more MUs then Varian machine. Conclusion: In this study, photon beam data are collected and analyzed to provide a baseline value for chocking beam data and the accuracy of dose calculation for a treatment planning system.

• Radiation Oncology Journal
• /
• v.12 no.2
• /
• pp.225-232
• /
• 1994

Purpose : This study was to obtain the basic dosimetric data using the 10 MV X-ray for the total body irradiation. Materials and Methods : A linear accelerator photon beam is planned to be used as a radiation source for total body irradiation (TBI) in Chonnam University Hospital. The planned distance from the target to the midplane of a patient is 360cm and the maximum geometric field size is 144cm x 144cm. Polystyrene phantom sized $30{\times}30{\times}30.2cm^3$ and consisted of several sheets with various thickness, and a parallel plate ionization chamber were used to measure surface dose and percent depth dose (PDD) at 345cm SSD, and dose profiles. To evaluate whether a beam modifier is necessary for TBI, dosimetry in build up region was made first with no modifier and next with an 1cm thick acryl plate 20cm far from the polystyrene phantom surface. For a fixed sourec-chamber distance, output factors were measured for various depth. Results : As any beam modifier was not on the way of radiation of 10MV X-ray, the $d_{max}$ and surface dose was 1.8cm and $61\%$, respectively, for 345cm SSD. When an 1cm thick acryl plate was put 20cm far from polystyrene phantom for the SSD, the $d_{max}$ and surface dose were 0.8cm and $94\%$, respectively. With acryl as a beam spoiler, the PDD at 10cm depth was $78.4\%$ and exit dose was a little higher than expected dose at interface of exit surface. For two-opposing fields for a 30cm phantom thick phantom, the surface dose and maximum dose relative to mid-depth dose in our experiments were $102.5\%$ and $106.3\%$, respectively. The off-axis distance of that point of $95\%$ of beam axis dose were 70cm on principal axis and 80cm on diagonal axis. Conclusion: 1. To increase surface dose for TBI by 10MV X-ray at 360cm SAD, 1cm thick acrylic spoiler was sufficient when distance from phantom surface to spoiler was 20cm. 2. At 345cm SSD, 10MV X-ray beam of full field produced a satisfiable dose uniformity for TBI within $7\%$ in the phantom of 30cm thickness by two-opposing irradiation technique. 3. The uniform dose distribution region was 67cm on principal axis of the beam and 80cm on diagonal axis from beam axis. 4. The output factors at mid-point of various thickness revealed linear relation with depth, and it could be applicable to practical TBI.

• Journal of Legislation Research
• /
• no.55
• /
• pp.57-94
• /
• 2018

Crisis of trust in Korean society, especially south-south conflicts among Korean political circle, civil society and peoples on the issue of the Korean peninsula policy driven by south Korean government, have weakened the sustainable and consistent energy of the policy for peace and unification of Korea peninsula. At the moment of drastic change of south-north relation in Korean peninsula, National agreement as a foundation of sustainable peace and unification policy has very important meaning. Because of this, national contract of unification as a kind of social concertation, has been demanded. National contract for peace and unification is an unprecedented process for making unofficial legal norm because it authorize quasi-legislative binding force on the agreement which is concluded by the Korean political circle, civil society and peoples for the peace and unification of Korean peninsula. National contract for peace and unification includes 'agreed aim and principles' for peace, prosperity and unification as well as process and result. And National contract for peace and unification, also is characterized long duration of aim achievement and openness of participating subjects. In terms of law, it will be legitimate source for comprehensive modification of international and internal law. In addition, The nature of National contract for peace and unification, as a people's law, should be considered as soft law which has the power to realize its contents through the enactment of legislation and policy. In order to guarantee the establishment and effectiveness of National contract for peace and unification, the setting of organization is need to determine the range of representatives, who participate in the process of contract making, procedure of contract and to carry out the contract after the conclusion of National contract for peace and unification. For the reason, the Council of National Contract for Peace and Unification as a independent administrative government committee and 'Act on National Contract for Peace and Unification' is needed.

• Korean Journal of Labor Studies
• /
• v.23 no.1
• /
• pp.1-45
• /
• 2017

The aim of this study is to analyze the process of the struggle and bargaining for the change of the employment position of the irregular (in-house subcontracted) workers being at work in the Hyundai Motor Company (HMC) plants into the status of the regular employee of the company, and evaluate the results and limitation of the irregular workers' movement. Since the unionization of irregular workers in 2003, they have carried on the struggle against and the bargaining with the HMC, over the past 10 years and more, making claims for abolishing 'illegal temporary agency work' and for converting their positions into the regular ones. The HMC have gradually altered a confrontational stance against the workers' claim at the early stage, into the bargaining relationship with irregular workers' union. Eventually, the collective agreement on the 'special hiring' of about six thousands irregular workers by the HMC was reached in 2016. We attempt to analyze in depth the overall process by dividing three phases of the movement, according to the criteria of the relationship between the alliance and conflict system, and the cycle of protests of irregular workers. Furthermore, we try to trace the long and winding path of the movement, focusing on the cooperation/conflict relationship within the movement's alliance system, the confrontation/bargaining relationship between the movement and the conflict system, and the critical roles played by mediators (or third parties) between two systems. In the conclusion of the paper, we evaluate the results and limitation of the irregular workers' movement upon the basis of the following points; the convergence of the workers' demands into the prime goal of 'becoming HMC's regular employee,' the breakaway of regular workers' union from the movement's alliance system, and a virtual extinction of irregular workers' union after the final labor-management agreement of 2016.

• (The)Study of the Eastern Classic
• /
• no.37
• /
• pp.93-126
• /
• 2009

This study is about a event, which happened on January of 1603 in Hamheung. It has covered from the beginning through the conclusion of the event. The event was ignited by a naturalized citizen, Guilsang's coming to the capital city without permission from the government. With this study I've wished to find the situations of specific management of naturalized citizens as well as popular attitudes towards them at the time. Concerning with the event of Guilsang, I could find more detailed situations from "Naturalization Registration". The reason why Guilsang came to Seoul was that he wanted to ask for living together with his son-in-law's family in Yang-Ju. Before his coming, Bie-Byun-Sa had sent a official letter to the governor of Hamkyung-Do so that he had had to move somewhere between Anbyun and Yung-heung. But Guilsang had wanted to live with his whole family in Seoul. The place he visited first was Sa-Yuk-Won. He presented his petition through Yeozin language translator there. Sa-Yuk-Won then informed Ye-Jo to have him investigated. After its investigation, Ye-Jo reported to the king. There were arguments about Guilsang family in the government. Guilsang had wanted to live with his whole family, including his relatives and son-in-law. Guilsang's request had more pros than cons in terms of humanism. But letting him live in Seoul was a difficult decision for the government. but his family strenuously insisted on living in Seoul, trying to kill itself. Finally Government selected Yong-In which was a compromise between the naturalized citizens' wish and difficult position of Government. Yong-In Miejo-Hyun was a poor region where naturalized citizens had lived before but now empty after the wars. In the process of the event of Guilsang, Government differentiated naturalized citizens from general citizens and regarded them foreign. A man from Yeozin was naturalized due to economic reason. But, he couldn't accept to live somewhere except Seoul, separating from his family. Government concerned with dangers of naturalized citizen becoming into foreign agents and stabilization of borders. These concerns caused the policy of residential control and decentralization of naturalized citizens failed.