• Title/Summary/Keyword: 이중편파

Search Result 216, Processing Time 0.029 seconds

A Study on Design of Microstrip Patch Antenna for Mobile Communication Systems using IE3D (IE3D를 이용한 단일 급전 이동통신용 마이크로스트립 패치 안테나 설계에 관한 연구)

  • Park, Jong-Dae;Park, Byeong-Ho;Shim, Woo-Seop;Kim, Myeong-Dong;Seong, Hyeon-Kyeong
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2012.10a
    • /
    • pp.316-319
    • /
    • 2012
  • In this paper, a novel particle swarm optimization method based on IE3D is used to design a mobile communication Microstrip Patch Antenna. The aim of the thesis is to Design and fabricate an inset fed rectangular Microstrip Antenna and study the effect of antenna dimensions Length (L), Width (W) and substrate parameters relative Dielectric constant (${\varepsilon}r$), substrate thickness on Radiation parameters of Band width. When the antenna was designed, a dual-band, dual-polarized antenna was used to secure the bandwidth and improve performance, and a coaxial probe feeding method so that the phased array of antenna is easy.

  • PDF

A Dual-Band Asymmetrical Metamaterial Antenna for Orthogonal Radiation Patterns (수직한 방사패턴을 형성하는 이중대역 비대칭 배열 메타물질 안테나)

  • Pyo, Seong-Min;Han, Sang-Min;Lee, Dong-Hyo;Kim, Young-Sik
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.10 no.9
    • /
    • pp.2246-2252
    • /
    • 2009
  • A new metamaterial antenna with dual resonant modes is presented using an asymmetrical periodic arrangement for orthogonal radiation patterns. The proposed antenna produces two orthogonal modes by the asymmetrical periodic unit-cell arrangement. The orthogonal resonant mode provides perpendicular radiation patterns without changing the antenna polarization at each resonant mode. The fabricated antenna shows good agreements with the theoretical analysis of the electric-field. The experimental results shows the orthogonal radiation patterns along x- and y-axises, and gains are 3.34 and 3.86 dBi at each radiating resonant mode, respectively. Additionally, slotted ground structures are embedded on the back side of the antenna in order to reduce the size and enhance the radiation efficiency of 12 % and 27 %, respectively.

Estimation Techniques of Hydrological Uncertainties on Rainfall Radar Measurement (강우레이더 관측의 수문학적 불확실도 산정 기법)

  • Hwang, Seok Hwan;Cho, Hyo Seob;Lee, Keon Haeng;Hyun, Myung Suk
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.78-78
    • /
    • 2017
  • 강우레이더 관측의 정확도는, 호우의 강도나 형태와 같은 기상학적 조건(변동 오차 요소) 외에도, 관측 지점의 레이더로부터의 거리, 고도, 관측유역의 형태나 크기 등 다양한 관측환경 조건(고정 오차 요소)에 의해서도 달라질 수 있기 때문에, 강우레이더 관측의 오차 성분을 정량화할 필요가 있다. 본 연구에서는 거리와 고도에 의한 오차 특성을 이중편파 변수의 특성을 이용하여 실증적으로 분석하였고, 이를 통해 감쇠의 영향과 산지효과(또는 지형효과)로 인한 오차 규모를 정량적으로 산정 비교하였다. 거리가 멀어짐에 따라 고도도 높아지기 때문에 QPE 불확실도의 거리와 고도에 따른 성분을 구분하는 것은 매우 어려운데, 거리에 대한 불확실도 성분이 매우 작은 R(KDP)를 이용한다면 효과적으로 분리가 가능하다. 이러한 원리를 이용하여, 관측 거리에 따른 오차가 매우 작은 R(KDP)를 기준으로 관측 거리에 따른 오차와 고도에 따른 오차를 분리하여 표준화[Z-score] 하였다. R(Z)의 경우는 관측 고도와 거리에 따른 오차가 중첩되어 나타나나, R(KDP)는 거리에 따른 오차는 거의 나타나지 않으므로 이를 기본 가정으로 하여 R(Z)와 R(KDP) 관계로부터 관측 고도에 따른 오차 성분만 분리하였다. 분리 결과, 관측 거리에 따른 표준 오차의 경우 100km 까지는 대략 10%(0.1) 이하로 나타났으나, 150km 이상에서는 30%(0.3)를 초과하는 것으로 나타났다. 관측 고도에 따른 표준 오차의 경우 2~3번째 고도각 까지는 대략10%(0.1) 이하로 나타났으나, 3번째 고도각 이상에서는 20%(0.2), 4번째 고도각 이상에서는 50%(0.5)를 초과하는 것으로 나타나, 고도에 의한 영향이 거리에 의한 영향보다 민감하게 나타났다. 1번째 고도각에서는, 100km 이내 근거리에서 관측 거리가 가까워질수록 오차가 증가하는 경향을 보이는데, 이는 저고도 빔 간섭(빔 차폐) 등의 영향으로 추정되었다.

  • PDF

A Plan for Goal Setting and Evaluation of The Rainfall Radar Considering with Measurement and Operating Performance (강우레이더 관측·운영 성능 목표설정 및 평가 방안)

  • Hwang, Seok Hwan;Ham, Dae Heon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.27-27
    • /
    • 2015
  • 본 연구에서는 강우레이더 관측망의 효과적인 운영관리 측면에서 관측과 운영 성능의 목표를 설정하고 평가하는 방안을 검토하였다. 레이더 관측망의 운영관리 측면에서 정량화가 가능한(정량적으로 평가된) 관측과 운영 목표를 설정하고 활용하는 것은, 관측의 정확도와 운영효율성을 과학적으로 평가 및 제고하기 위해 반드시 필요한 사안이다. 국토교통부는 2015년 현재, 기존에 설치 운영 중인 임진강, 소백산, 비슬산 레이더와 함께 예봉산, 가리산, 모후산, 서대산 총 7대의 S밴드 이중편파 레이더를 설치 운영할 계획이다. 이에 따라 강우레이더를 활용한 최적의 홍수예경보를 위해서는, 강우레이더 관측성능의 현 수준을 파악하여 홍수예경보 측면에서 관측정확도와 운영효율을 높이기 위한 방법(목표설정 및 평가 방법)의 모색이 필요하다. 가장 이상적인 방법은 관측 자료를 기반으로 분석하여 도출하는 것이겠으나, 현재 설치 단계로 모든 관측소의 관측 자료가 생산되고 있는 것은 아니므로, 본 연구에서는 관측 정확도에 영향을 미치는 관측환경 요소를 분석하는 방법을 선택하였다. 관측환경 요소로는 차폐, 빔고도, 빔높이, 빔폭 등이 이에 해당하며, 홍수예경보 측면을 고려하면 홍수취약성 요소(홍수예경보목표 대상유역 면적, 도달시간, 경사, 인구 등)도 고려해야 할 것이다. 즉, 강우레이더는 홍수예경보 정확도 향상을 위해 운영되므로, 홍수예경보 정확도 향상에 어느 정도 기여할 수 있는지 평가해야 한다. 이는 현재 지역별로 홍수예경보 취약 정도를 평가해야 하고 이를 위해서는 관측 취약성과 홍수 취약성을 함께 고려해야 한다. 따라서 본 연구에서는 관측 취약성과 홍수 취약성을 함께 고려한 강우레이더 관측망의 관측 운영 성능 목표설정 및 평가 방안을 제시하였다.

  • PDF

Validation of spatial rainfall measurement of an electromagnetic wave rain gauge (전파강수계의 강우 공간분포 측정 성능 검증)

  • Lee, Jung Duk;Kim, Won;Lee, Chanjoo;Lim, Sanghun;Kim, Donggu
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.232-232
    • /
    • 2021
  • 수재해 저감과 예방을 위해서는 공간적 변동성을 반영한 정확한 면적 강우량의 측정은 필수적이다. 이러한 요구에 부응하기 위해 24 GHz 이중편파 전자파를 기반으로 소규모 공간 범위에 대해 저고도의 지상 강우를 30 m의 거리해상도로 관측할 수 있는 전파강수계가 개발되었다. 전파강수계는 시제품이 개발된 이래로 한국건설기술연구원 연천센터와 국내 여러 현장과 인도네시아 등에서 시험을 실시하였다. 임상훈 등(2020)은 전파강수계의 반사도와 비차등위상차를 이용한 강우 추정식을 개발하여 연천 및 거제 관측 자료에 적용한 바 있다. 본 논문에서는 연천센터에 분산 배치한 우량계 자료를 이용하여 전파강수계의 강우 공간분포 측정 성능을 평가하였다. 공간우량계는 15대 중 음영구역 바깥에서 정상 작동한 7개의 0.5mm급 우량계 자료와 핏게이지에 있는 0.2mm급 우량계 2대가 비교에 사용되었다. 전파강수계 강우강도는 비교 위치에 해당하는 점 주변의 레이 방향 5개(37.5 m에 해당) 및 방위각 방향 5개 게이트 등 총 25개의 복셀에서 산출된 강우 정보를 평균하여 비교하였다. 정확도는 지상우량계를 참값으로 보고 MAE(Mean absolute error)로 평가하였다. 그 결과 평균 4.2%의 오차를 보였으며, 우량계의 오차를 ±5%로 가정할 경우 3.3~7.9%로 나타났다. 전파강수계의 누적 강우량 값은 강우계에 비해 작은데, 이는 지속적인 관측을 통해 강우 산정의 정확도를 개선하는 것이 필요함을 의미한다.

  • PDF

Design of Tx 3OGHz/ Rx 20GHz dual feeding circular polarized patch antenna (송신 30GHz/ 수신 20GHz 이중급전 원형편파 패치 안테나 설계)

  • Kim, Sung-Nam;Oh, Min-Seok;Cheon, Young-Min;Choi, Jae-Ick;Pyo, Cheol-Sig;Lee, Song-Moon;Cheon, Chang-Yul
    • Proceedings of the KIEE Conference
    • /
    • 2004.07c
    • /
    • pp.2058-2060
    • /
    • 2004
  • In this paper, circular polarized antennas of Tx 30GHz and Rx 20GHz are implemented in LTCC process. Tx antenna has a circular patch structure and Rx antenna has a ring patch structure. The feeding line of Tx antenna is placed in the center hole of Rx ring patch antenna which is printed under Tx circular patch antenna layer. It makes antenna size smaller. Tx antenna's return loss in under -10dB level from 30GHz to 31GHz and Rx antenna is under -10 dB from 20GHz to 21GHz. The isolation between two antennas is less than -20dB. Axial ratio is less than 3dB though out each band.

  • PDF

GPS/GLONASS Microstrip Active Antenna Apply to Curve Surface (곡면에 부착 가능한 GPS/GLONASS 마이크로스트립 능동 안테나)

  • Kim, Mi-Suk;Son, Seok-Bo;Joo, Hahn-Kie;Bae, Joon-Sung;Kim, Joon-O
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.14 no.1
    • /
    • pp.1-8
    • /
    • 2011
  • In this paper, dual-feed circularly polarized microstrip patch antenna for GPS L1, GPS L2, GLONASS L1 signal was fabricated by using stacked patch. It was fed by dual coaxial probe on the patch at 50ohm impedance, and was simulated to resonate at GPS L1, GPS L2, GLONASS L1. To realize characteristics of right hand circular polarization using dual-feed stacked patch antenna and hybrid coupler for $90^{\circ}$ phase difference. Output of hybrid coupler was contacted input of Low Noise Amplifier(LNA). The LNA using dual band pass filter was designed and fabricated. The measured results of the implemented antenna is VSWR < 1.5 : 1 and the gain of 32dB(Zenith) over at GPS L1, L2, GLONASS L1.

Telematics Antenna for Vehicles (차량용 텔레매틱스 안테나)

  • 김해연;이병제;양성현
    • Journal of the Korea Computer Industry Society
    • /
    • v.5 no.2
    • /
    • pp.331-336
    • /
    • 2004
  • In this paper, an antenna for telematics is proposed. It operates at GPS/GSM frequency-bands and it can be installed inside of a vehicle. There is a great difference between the proposed antenna and commonly used antennas. It needs not to use a dielectric with a high permittivity since it is formed on a sheet of FR4 with only 1mm thickness. Thus, it is possible to cut costs and make process of manufacture simple. Planar inverted-F antenna(PIFA) for GSM and microstrip antenna(MSA) for GPS is designed and PIFA-MSA antenna is proposed. The height is lower than that of commonly used antennas. And polarization of the PIFA and MSA is arranged perpendicularly for isolation improvement of each port, thus isolation of these two antennas is improved. Also, it is sufficient for the all specifications.

  • PDF

Satellite Communication Microstrip 8X2 Away Antenna for TX / RX Dual Operation at Ku-band (Ku 대역 위성통신 송수신 겸용 마이크로스트립 8X2 배열 안테나)

  • 윤재승;전순익;최재익;채종석
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.13 no.6
    • /
    • pp.574-581
    • /
    • 2002
  • Microstrip $8{ imes}2$ sub-array antennas for a extension to active phased array antennas are designed, fabricated and measured for TX/RX dual operation in satellite communication and a reception of satellite broadcasting. For the frequency range from 11.7 to 12.75 GHz for RX and from 14 to 14.5 GHz for TX, two orthogonal linear polarizations of ${pm}45^{\circ}$ are used to transmit and receive simultaneously with one radiator. They adopt dual resonance between two patches for wideband characteristics in RX band and show isolation characteristics over 20 dB. An electrical beam tilt of $30^{\circ}$ is achieved and a tapered power distribution, narrow element spacing are used for the purpose of low side-lobe characteristics.

Analysis of Characteristics of Ku/C Band Modified Square Loop Frequency Selective Surface (Ku/C 밴드 변형된 사각 루프 주파수 선택 반사기 특성 해석)

  • 노행숙;이동진;최학근
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.11 no.2
    • /
    • pp.186-196
    • /
    • 2000
  • In this paper, modified square loop frequency selective surface for dualband communication antenna systems is proposed, and the scattering characteristics is discussed. The analysis for the problem of scattering by periodic structures with a dielectric slab is formulated using the spectral-domain immittance approach and Floquet's theorem. The method of moments which uses rooftop subdomain basis function is employed to solve the equations. Numerical results include the comparison between the transmission characteristic of general square loop and that of modified square loop. Also, the transmission characteristics of modified square loop for arbitrary incident angle and polarization is presented. To verify analysis results, modified square loop frequency selective surface was fabricated and the calculated results were compared with the measured results. The measured results showed good agreement with the calculated results.

  • PDF