• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.479-488
• /
• 2003

Dual-band microstrip antenna is designed for industrial-scientific-medical(ISM) band of 2.4 GHz and 5.8 GHz using finite-difference time-domain method(FDTD). Cross patch 130 by aperture in the ground plane of microstrip line is proposed as radiation element of antenna which is 2 rectangular patch is overlapped. To design antenna, change of input impedance is examined by length change of aperture and stub. And center frequency and - 10 dB bandwidth are investigated by change of length and width in radiation element. Measured result about reflection loss confirm that agree well with simulation results of FDTD and IE3D. And 3 dB beam width, front to back ratio and maximum gain is presented by measuring radiation pattern of antenna in frequency 2.43 GHz and 5.79 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.3
• /
• pp.163-169
• /
• 2017

This paper proposed a method of broadband method of dual polarized dipole antenna for 700 MHz band base station. The proposed antenna has a structure that PCB feeder is mounted on the metallic radiator. The design of radiator and feeder is optimized by using 3D EM simulation. The proposed antenna(bandwidth 31.6 %) is broadened over 12.2 % through the lower frequency band than reference antenna(bandwidth 19.4 %), however the size is not increased. Measured results of S-parameters, radiation patterns, and gain have a good agreement with simulation ones.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.121-121
• /
• 2010

유기발광소자의 발광 효율을 향상하기 위해 발광층에서 전자와 정공의 효율적인 재결합이 중요하기 때문에 발광층에서 재결합 확률을 높이기 위한 전하의 효율적인 주입과 전송에 대한 연구가 많이 진행되고 있다. 본 연구에서는 전자주입효율을 향상하기 위하여 강한 전자 받게 역할을 하는 플러렌 (C60)과 무기물 절연층인 cesium flouride (CsF) 층을 조합한 무기물 이중 전자주입층을 삽입한 녹색 유기발광소자를 제작하였고, 녹색 유기 발광 소자에 사용하여 발광효율의 변화를 관찰하였다. 큰 쌍극자 모멘트를 갖는 CsF 층은 전기전도성이 좋은 C60 층과 Al 층 사이에 삽입되어 전자의 주입장벽을 낮추어 전자주입 효율을 향상하는 역할을 한다. C60만으로 이루어진 단층 전자 주입층으로 구성된 유기발광 소자는 Al 음극전극과 C60 계면사이에 거칠기가 크기 때문에 누설전류의 크기가 커지며 Al 과 플러렌 C60 의 공유결합 형성으로 인해 전자의 주입이 오히려 저하되는 현상을 보였다. 무기물 절연층인 CsF 층을 C60 과 Al 사이에 삽입한 유기발광소자에서 C60 층은 Cs 원자가 유기물층 내부로 확산되는 것을 감소하였다. 매우 얇은 CsF층을 Al층과 C60층 사이에 삽입함으로써 C60과 Al 사이의 공유결합을 없애고 누설전류를 줄이고 전자주입장벽을 낮추어 전자주입효율이 향상하였다. 전자주입 향상으로 인해 발광층 내에서 전자와 정공간의 비율이 개선되어 유기발광 소자의 발광효율도 증가되고 색안정성이 향상되는 것을 관찰할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.492-492
• /
• 2013

반도체 공정을 위한 원격 유도 결합 플라즈마(remote ICP)에서 플라즈마 균일도를 향상하는 연구를 진행하였다. 본 연구에서는고 균일도 플라즈마 발생을 위해 단면적이 다른 2개의 반응 용기를 상부와 하부에 설치하였으며, 각각의 반응 용기 외곽에 방전 코일이 위치하도록 구성하였다. 상부의 반응 용기는 외곽에 유도 코일을 권선하였고, 하부의 반응 용기는 고밀도의 플라즈마 생성을 위해 강자성체를 이용하여 권선하였으며, 강자성체는 쿼츠관을 둘러 싼 구조로 되어 있다. 0.5-1 Torr 공정 압력 범위의 아르곤 기체에서 전체 2500 W의 전력을 인가하였고, 임피던스 정합회로로부터 각각 병렬로 연결된 방전 코일에 전력이 분배되어 인가되는 구조로 설계하였다. 반도체 공정을 위한 플라즈마 균일도를 분석하기 위해 wafer의 위치에서 부유 탐침법을 적용하여 wafer 중심부로부터 반경 방향으로 위치를 변화시키며 플라즈마 밀도와 전자온도를 측정하였다. 동일한 공정 조건에서 하부에 강자성체를 사용하여 권선한 이중 구조의 경우 하나의 방전 코일을 이용한 구조 대비 플라즈마 밀도가 증가하였고, 플라즈마 균일도가 크게 향상됨을 보였다. 강자성체를 이용한 하부 코일에 의해 wafer 외곽 부분의 밀도가 높은 분포를 갖는 플라즈마가 형성되고, 상부의 유도코일에 의해 wafer 중심부에 밀도가 높은 플라즈마가 형성되어 wafer의 플라즈마 균일도가 개선된다. 또한, 강자성체를 이용한 하부 코일에 의해 고밀도의 플라즈마가 형성되므로 반도체 공정을 위한 장비에서 플라즈마 균일도의 개선과 밀도의 향상으로 대면적 Dry Strip 공정 (450mm)에 적용 가능하다.

• The Korean Journal of Nuclear Medicine
• /
• v.11 no.1
• /
• pp.9-15
• /
• 1977

Radioiodine labelled human follicle stimulating hormone has been prepared using chloramine-T, with the approximate labelling yield of 65%. The labelled product is purified by means of a starch gel electrophoresis, and a Sephadex gel filtration, and the separation efficiencies are assessed for the effective use in radioimmunoassay. The results indicate that the gel filtration is efficient in view of the separation time, simplicity and bindability of the labelled hormone to the antibody. In determining the ratio of the free to the antibody hound labelled hormone, a double antibody technique is applied in comparison with a chromatoelectrophoresis. The ratio could be obtained only in the case of applying the double antibody technique.

• Korean Journal of Social Welfare
• /
• v.63 no.4
• /
• pp.301-326
• /
• 2011

The major purpose of this study is to evaluate the impact of the long-term care insurance program. In order to estimate the impact of policy accurately, certain bias which might hamper the validity of this study has been removed by Propensity Score Matching(PSM) and Double Difference(DD) method from the semi-experimental design. To study the effects of long-term care insurance on the elderly and their family members as social outcome variable sand the quality of life of their family and satisfaction in family relationships, the third and fourth waves of Korea Welfare Panel are used to match experimental and comparative groups by the propensity score matching. Then, DD method, using the panel fixed effects model, is applied to estimate the differences of those groups'treatment effects before and after the policy implementation. As a result, it was found that the Quality of life on the elderly and their family members is statistically meaningless, while the satisfaction in family relationships has much increased after the policy implementation. The result has a limitation in that this evaluation is performed at the point when the long-term insurance program has not been ripened enough. However, there is an important implication on the significance of realizing the main goal of the long-term care insurance to improve the quality of life of the elderly and their family members and as for the potentiality of further system improvements.

• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.423-428
• /
• 2000

We have demonstrated a -8 dB additional reduction in the intensity sidelobe of an apodized-interaction-strength guide-wave acousto-optic filter with a center passband of 1551.6 nm. Acoustic-intensity weighting was achieved by launching a surface acoustic wave (SAW) beam in a straight acoustic waveguide, and gradually transferring this SAW intensity to the active device, and back out, by evanescent-wave coupling across a 50 !lm barrier over a 19 rom interaction length. The intensity sidelobe was -4.27 dB for an unapodized filter with abmpt onset and cutoff of the interaction, but sidelobes were reduced to at most -12.68 dB for a SAW intensity with raised-cosine weighting. The RF driving power was 17.78 mW. A linear tuning rate of 8.86 nmIMHz and a spectral width of -1.7 nm were demonstrated. rated.

• Journal of Life Science
• /
• v.8 no.2
• /
• pp.119-125
• /
• 1998

Column-purified double-stranded RNA binding factor (RBF) protein was tested for its binding affinity for the different forms of nucleic acids structure such as single-stranded(ss) and double-stranded(ds)RNA and ss- and dsDNA. The RBF protein was incubated with each of these nucleic acid structures in separate reactions and its comparative binding affnity was visualized by SDS-polyacrylamide gel electrophoresis. The RBF protein bound to the dsRNA molecule to form a tight RNA:protein complex in agreement with previous studies, but not to the other nucleic acid molecules confirming its distinctive affinity for the dsRNA structure. In phosphorylation assay in vito, the purified RBF protein significantly inhibited the autophosphorylation of the PKR derived from not only human but mouse source in the presence of poly(I):poly(C). It is suggesting that PKR vs. RBF is similarly under a competitive interaction among different eukaryotic organisms during protein synthesis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.4
• /
• pp.274-281
• /
• 2010

This paper proposes a DFPS (Dual Frequency Power Source) impedance matching device for uniformity improvement of a semiconductor plasma etching system. The DFPS consists of two parts for safe plasma processing on large-area substrates. The first part is an ICP (Inductively Coupled Plasma) for high integration by using ferrite core. The second part is a CCP (Capacitive Coupled Plasma) to control uniformity of whole cells. Proposed DFPS can achieve high productivity improvement required for semiconductor equipment industry. The proposed plasma system is analyzed, simulated and experimentally verified with a matching equipment at 27.12MHz and 400kHz.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.384-390
• /
• 2018

Hybrid telescopic double crown have ever been good treatment option for patient with periodontally unfavorable few remaining teeth for successful prognosis. Tooth and implant combined telescopic double crown can be used for improving retention and support for denture with strategically placed implants on edentulous ridge. In this case, an 55-year-old female patient had chronic periodontitis with few remaining teeth on maxilla and fixed partial prosthodontics on mandible. Treatment of hybrid telescopic double crown with friction pin lasted 9.5 years only with natural teeth. After 9.5 years, additional implants was installed due to fracture of cast-posted abutment teeth. After implantation, tooth and implant combined double crown had fabricated. Through re-treatment, no complications of new denture has been found during 2 years follow up. This case presents fair prognosis of tooth and implant combined double crown denture in periodontally unfavorable condition.