• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.1
• /
• pp.67-76
• /
• 1997

In this paper we developed a tactile feedback device using repulsive force of magnets. The force of the tactile feedback device was derived from the Maxwell's stress method by using the concept of magnetic charge. Magnetic repulsive force is linear function with respect to current and nonlinear to displacement. Experimental data shows these characteristics. To compensate the fact that the presented tactile feedback device can not be controlled by close loop control, we developed a simulation model which predicts output displacement and force by using Runge-Kutta method. And, this paper evaluated the presented tactile feedback device and compared it with commercial tactile feedback devices.

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.319-328
• /
• 2011

The failure of LCC analysis is recognized as a serious risk for companies in fast-paced business environment. LCC analysis has been mentioned and analyzed only in accounting perspectives, but recently engineering perspectives of LCC analysis based on the execution of appropriate procedures become more important than the accounting perspectives. Especially, the practical use of reliability engineering related methodologies is recognized as a key factor for the LCC analysis. For the practical use of reliability methods, LCC analysis for unexposed problems is a key issue, and utilizing FMEA and FTA techniques is needed to solve the unexposed problems. Reliability, maintainability, availability, and safety should be evaluated by the LCC analysis with the reliability methods, so we study methodologies for the LCC analysis. Present Worth can be calculated by multiplication of Annual Equivalent Cost and PWAF. Reliability engineering related methods are needed for the process of dividing Present Worth into PWAF, and the practical use of reliability methods can improve accuracy of LCC analysis.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.1
• /
• pp.286-296
• /
• 2017

This paper conducted a simulation to research the motion of a vessel, which had the flooding accident in the Bering Sea in 2014, thereby being flooded and un-steerable. As the wind condition was very harsh, the vessel was modeled as 3D including large upper deck structures and the Fujiwara's method was used for an estimation of the effect of wind forces and moments acting on ship. In the case of wave influence, AQWA-Drift that enables considering the effects of drift force and AQWA-Naut that enables considering the effects of green water were mainly used. Basically, loading and flooding condition were equal to the accident condition but half-drained condition was also used to consider drain ability. Furthermore, both 6 DOF and 5 DOF option that Yaw motion is fixed, were utilized to compare the steerable and un-steerable condition. As a result, the author found out that what roll angle triggers green water, how often it happens, and how the vessel moves on the stormy weather condition.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.1
• /
• pp.15-22
• /
• 2010

This paper was originated to set up a test equipment and to obtain the proper installation condition of the plastic damper for the hydraulic clutch control system. Performance tests with different specifications have been applied to the damper to investigate the workability and the vibration characteristics of each case, and the result was utilized into the system simulation for the optimal condition for the damper. The procedure has been developed to set up a damper test system to analyze the dynamic properties and the operation of the system, and further to setup a simulation program for the realistic situations. The result can also be applied to the dampers and the clutch systems to be developed in the future for the property tests and the optimization of the installation conditions.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.4
• /
• pp.222-227
• /
• 2018

Most underwater acoustic arrays for low frequency operation are deployed vertically, but a mid-range frequency horizontal array system is being developed by the Korea Research Institute of Ships and Ocean Engineering (KRISO). The horizontal array platform is deployed underwater and kept in place by weather vaning mooring. This is essential because it is nearly impossible to keep a submerged body at a given position in the water without any external force. Hence, the horizontal array platform can maintain the desired position in the presence of a weak tidal current. The objective of this study is to design an underwater platform that can maintain its horizontal position in a weak current. First, the authors investigated various virtual models, selected one of the models, and performed a small model test of the selected model at a basin. We calculated the external forces associated with the 2D motion, and then we conducted a large basin test followed by a circulation water channel test for the manufactured array platform. The results of the simplified 2D motion calculation essentially matched the results of the underwater test.

• Journal of the Korean Ceramic Society
• /
• v.45 no.12
• /
• pp.807-814
• /
• 2008

The Cu-Ni-YSZ cermet anodes for direct use of methane in solid oxide fuel cells have been fabricated by electroplating Cu into the porous Ni-YSZ cermet anode. The uniform distribution of Cu in the Ni-YSZ anode could be obtained via pulse electroplating in the aqueous solution mixture of $CuSO_4{\cdot}5H_{2}O$ and ${H_2}{SO_4}$ for 30 min with 0.05 A of average applied current. The power density ($0.17\;Wcm^{-2}$) of a single cell with a Cu-Ni-YSZ anode was shown to be slightly lower in methane at $700^{\circ}C$, compared with the power density ($0.28\;Wcm^{-2}$) of a single cell with a Ni-YSZ anode. However, the performance of the Ni-YSZ anode-supported single cell was abruptly degraded over 21 h because of carbon deposition, whereas the Cu-Ni-YSZ anode-supported single cell showed the enhanced durability upto 52 h.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.4
• /
• pp.464-478
• /
• 1998

In teleoperation, it is important for an operator to feel as if he really were in a distant place. To realize this objective, the various information from a remote site must be presented to the operator. Even though tactile information is very important to efficiently execute a task, it is not yet sufficiently provided for the operator. In this paper, we propose the new mechanism that can provide the more dexterous tactile information to the operator This device utilizing the electromagnetic force is designed to be compact and light enough to be attached to the fingerpad, and designed to be controlled continuously. The magnetic circuit is derived by the probable flux paths method in order to take forces at any given dimension. An optimization technique is also proposed to maximize the tactile force that humans can perceive under the same conditions. The objective function is formulated as maximizing displacements indented on the fingerpad, considering the mechanism of human tactile perception. The optimization formulation is subject to the geometric and rising temperature constraints in the coil. It is demonstrated that, by optimization, the tactile force increases by 24%, compared with that obtained from the initial design.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.9-10
• /
• 2015

본 논문에서는 전자기 유도의 동일 원리를 기반으로 하는 무선전력전송(WPT, Wireless Power Transfer)와 인덕션 히팅(IH, Induction Heating) 기술을 융합하기 위한 고효율 중전력(100W~2.4kW) 시스템을 제안한다. 제안하는 시스템은 고효율 PFC 컨버터와 무선전력 전송 및 IH렌지 겸용 고주파 인버터로 구성된다. PFC 컨버터는 단위역률과 동시에 고효율을 달성할 수 있는 Bridgeless PFC로 구성하였으며 인버터는 중전력 및 넓은 출력 범위를 지니는 Full-Bridge 인버터로 구성하였다. 무선전력전송과 IH렌지를 위한 송/수신부 코일 구조를 개발하였으며 최대 전력 전송을 위한 공진회로를 개발하였다. 중전력에서 고효율 및 시스템 안정성을 기반으로 하여 국내외 규제를 만족하는 시제품을 제작하여 상용화 가능성에 대한 확인을 목표로 한다.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.479-482
• /
• 2008

In order to more closely examine the vacuum arc phenomena, it is necessary to predict the magnetohydrodynamic (MHD) characteristics by the multidisciplinary numerical modeling, which is coupled with the electromagnetic and hydrodynamic fields, simultaneously. In this study, the thermal-fluid characteristics of high current vacuum arcs were calculated by a commercial multiphysics package, ANSYS, in order to obtain Joule heat, Lorentz force and the interactions with flow variables. We assumed the diffused-mode arc within an AMF vacuum interrupter. It was found with four different currents that the temperature distributions on the anode surface are diffused uniformly without concentration in 7kA for both types (cup and coil-type). But the arc plasma transition and an increase of thermal flux density for increasing the applied current have caused the change of temperature distributions on the anode surface. We should need further studies on the two-way coupling method and radiation model for arc plasmas in order to accomplish the advanced analysis method for multiphysics.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.8 s.227
• /
• pp.1125-1134
• /
• 2004

This paper presents a mathematical model which is about the dynamics of not only a two wheel steering vehicle but a four wheel steering vehicle. A sliding mode ABS control strategy and PID rear wheel control logic are developed to improve the brake and cornering performances, and enhance the stability during emergency maneuvers. The performances of the controllers are evaluated under the various driving road conditions and driving situations. The numerical study shows that the proposed full car model is sufficient to accurately predict the vehicle response. The proposed ABS controller reduces the stopping distance and increases the vehicle stability. The results also prove that the ABS controller can be employed to a four wheel steering vehicle and improves its performance. The four wheel steering vehicle with PID rear wheel controller shows increase of stability when a vehicle speed is high and sharp cornering maneuver when a vehicle speed is low compared to that of a two wheel steer vehicle.