• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.243-245
• /
• 2004

가속기의 저장링 및 빔라인에는 방사광을 차단 혹은 일부 통과 둥의 목적으로 Photon Absorber와 같은 진공 부품이 사용되고 있으며, 이는 일반적으로 구리와 스테인리스 스틸 등의 이종재료를 브레이징 공정을 이용하여 제작함으로써 부품이 구조적 건성의 확보와 더불어 진공환경 및 수밀을 유지하고 있다. 그러나, Photon Absorber는 사용 용도에 따라 구조적 형상이 서로 다르기 때문에 브레이징 공정을 적용하는 경우, 상대적으로 제품 생산가격의 상승, 유지보수 및 제작불량에 따른 공정 제어의 어려움이 나타나고 있다. 본 연구에서는 스테인리스 스틸 (STS 304)과 구리(OFHC Copper)의 이종금속에 접합에 GTAW 용접 공정 기술을 적용하여 제반 용접공정에 따른 용접부 성능 및 진공 특성 등을 검토하였다. 용접봉 (ER CuSi-A)을 직접 사용하여 이종 재료의 시험편에 GTAW 용접을 적용한 결과, 진공 누설율은 $1{\times}10^{-10}\;Torr{\cdot}l/s$ 이하를 얻을 수 있었으며, 용접 접합부의 인장강도 210 MPa로써 구리 모재와 유사한 기계적 특성을 나타내었다.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.17-26
• /
• 2005

Dissimilar-metal welds(DHWs) are used widely in various industrial applications due to the pratical importance from the technical and economic aspect. However, DMWs have several fabricative and metallurgical drawbacks that can often lead to in-service failures. For example, the most pronounced fabrication faults are hot cracks. Recently, DMWs have used the various of heat source to decrease such as faults. In this paper, the weldability on dissimilar metal welds of Austenite stainless steel and Low carbon steel using a continuous wave Nd:YAG laser was experimentally investigated. Experiments were conducted to determine effects of welding parameters, on eliminating or reducing the extent welding zone formation at dissimilar metal welds and to optimize those parameters that have the most influence parameters such as focus length, power, beam speed, shielding gas, and wave length of laser.

• 대한기계학회논문집A
• /
• 제32권10호
• /
• pp.873-881
• /
• 2008

Weld overlay is one of the residual stress mitigation methods which arrest crack initiation and crack growth. Therefore weld overlay can be applied to the region where cracking is likely to be. An overlay weld used in this manner is termed a preemptive weld overlay(PWOL). In pressurized water reactor(PWR) dissimilar metal weld is susceptible region for primary water stress corrosion cracking(PWSCC). In order to examine the effect of PWOL on residual stress mitigation, PWOL was applied to a specific dissimilar metal weld of Kori nuclear power plant by finite element analysis method. As a result, strong compressive residual stress was made in PWSCC susceptible region and PWOL was proved effective preemptive repair method for weldment.

• Journal of Welding and Joining
• /
• 제29권2호
• /
• pp.13-20
• /
• 2011

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.129-131
• /
• 2005

• 대한기계학회논문집A
• /
• 제36권6호
• /
• pp.599-608
• /
• 2012

일체형 원자로의 안전주입 노즐 이종금속 용접부의 잔류응력에 대한 레이저 피닝의 효과를 고찰하기 위해 상용 프로그램인 ABAQUS를 이용하여 implicit 동적 유한요소 해석을 통해 연구를 수행하였다. implicit 동적 유한요소 해석은 기존의 실험 결과와의 비교에 따르면 레이저 피닝을 통한 잔류응력 이완에 대해 타당하다고 확인된다. 한편 내부 보수용접이 수행된 이종금속 용접부에 대해 해석이 수행되며 그 결과는 축방향 및 원환 잔류응력 모두 내부 보수용접에 기인하여 노즐의 내표면에서 인장임을 나타낸다. 또한 용접 잔류응력 이완에 대한 최대 충격 압력, 압력 지속 시간, 스폿 직경 및 피닝 방향과 같은 여러 변수의 효과를 고찰하기 위해 변수 해석 또한 수행하였다. 결과적으로, 레이저 피닝은 내표면 근처 영역의 잔류응력을 주로 이완시키는 예방정비 효과가 있음을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.83-84
• /
• 2008

The primary water stress corrosion cracking (PWSCC) of dissimilar metal weld based on Alloy 82/182 is one of major issues in material degradation of nuclear components. It is well known that the crack initiation and growth due to PWSCC is influenced by material's susceptibility to PWSCC and distribution of welding residual stress. Therefore, modeling the welding residual stress is of interest in understanding crack formation and growth in dissimilar metal weld. Currently in Korea, a numerical round robin study is undertaken to provide guidance on the welding residual stress analysis of dissimilar metal weld. As a part of this effort, the present paper investigates distribution of welding resisual stress of a ferritic low alloy steel nozzle with dissimilar metal weld using Alloy 82/182. Two-dimensional thermo-mechanical finite element analyses are carried out to simulate multi-pass welding process on the basis of the detailed design and fabrication data. The present results are compared with those from other participants, and more works incorporating physical measurements are going to be performed to quantify the uncertainties relating to modelling assumptions.

• 한국압력기기공학회 논문집
• /
• 제9권1호
• /
• pp.70-76
• /
• 2013

Several finite element models for the leak-before-break (LBB) assessment of overlay dissimilar metal weldment were constructed and analyzed to develop a simple finite element modeling method. The J-integral, crack opening displacement (COD) and J-integral distribution along the crack front in thickness direction due to the applied moment were obtained from the analysis results of the constructed finite element models, and studied compared to the previous literatures. It is concluded that the modeling with base material only is simple and produces a slightly conservative results compared to the complex modeling composed with weld metal and base metal in the calculation of J-integrals and COD values which are used for the calculation of fracture toughness and postulated leakage crack length respectively.

• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.770-781
• /
• 2008

In nuclear power plants, ferritic low alloy steel components were connected with austenitic stainless steel piping system through alloy 82/182 butt weld. There have been incidents recently where cracking has been observed in the dissimilar metal weld. Alloy 82/182 is susceptible to primary water stress corrosion cracking. Weld-induced residual stress is main factor for crack growth. Therefore exact estimation of residual stress is important for reliable operating. This paper presents residual stress computation performed by 6" safety & relief nozzle. Based on 2 dimensional and 3 dimensional finite element analyses, effect of welding variables on residual stress variation is estimated for sensitivity analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1120-1125
• /
• 2004

Welding characteristics of STS304 stainless steel and Inconel 600 using a continuous wave Nd:YAG laser are experimentally investigated. Alloy 600 being used in steam generator tubing of pressurized water reactor(PWR) exposed to some corrosion environment, stress corrosion cracking can occur on this material. Presented here are the results from a series of experiments in which dissimilar metal welds were made using the gas tungsten arc welding process with pure argon shielding gas. But It is well known that solidification cracking susceptibility of austenitic alloys depends on the solidification temperature range and amount/distribution of solute rich liquid that exists at the terminal stages of solidification. An experimental study was conducted to determine effects of welding parameters and to optimize those parameters that have the most influence on eliminating or reducing the extent welding zone formation at dissimilar metal welds.