• 기술세미나
• /
• s.3
• /
• pp.231-249
• /
• 2006

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.2 s.24
• /
• pp.20-27
• /
• 2007

• Korean Architects
• /
• no.3 s.133
• /
• pp.45-57
• /
• 1980

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.11a
• /
• pp.146-147
• /
• 2008

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1990.10a
• /
• pp.95-97
• /
• 1990

This study investigated electrical characteristic of solids and liquid epoxy resins by measuring dielectric breakdown and dielectric loss when epoxy resins were exposed to a mixing cure. It was found that mixing epoxy resins were superior to dielectric breakdown and hardness and has shorter curing time compare with those of pure liquid epoxy resins.

• Electrical & Electronic Materials
• /
• v.5 no.2
• /
• pp.224-236
• /
• 1992

본 논문에서는 내부전극을 갖는 마이카-에폭시 복합시료의 계면정합상태에 따른 계면층에서의 절연파괴특성에 대해 조사 연구하였다. 실험결과, 계면은 이상수지층으로 작용되며 마이카는 계면결합제와의 화학적반응 및 흡착에 의해 친수성이 적어짐을 확인하였고 또한 계면의 정합상태는 계면결합제의 수용액 농도에 의해 좌우되었다. 계면정합이 불량하면 인가전압의 상승에 따라 부분방전량의 증가 및 발생빈도의 직선적인 증가 특성이 보이며 계면정합이 양호한 경우는 방전량이 포화되는 시점에서 발생빈도는 지수함수적으로 증가되었다.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3B
• /
• pp.340-345
• /
• 1999

In this paper, polyimide thin films are fabricated by vapor deposition polymerization method appling to the interlayer insulator of semiconductor device, and are investigated in detail. It is found that the packing density and uniformity of films deposited by thermal evaporation are increased according to curing temperature. The resistivity, breakdown strength, relative permitivity, and dielectric loss are $3.2\tomes10^{15}\Omega$cm, 4.61 MV/cm, 2.9(10kHz) at $25^{\circ}C$, respectively. This thin films can be endured at $230^{\circ}C$ for 20,000 hours. Finally, we conclude that the thin films having the characteristics similar to those of $SiO_2$ can be used as an insulation films between layers of semiconductor device.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2007.05a
• /
• pp.65-66
• /
• 2007

원자력 발전소 방사선 관리구역 1차 계통수의 수질 정화 후 발생된 고선량 폐필터를 방사능 붕괴 후 잡고체 폐기물로 처리하기 위한 장기저장시설 내 설치 될 설비 임. 동 설비는 자동화공정을 기본으로 한정된 공간에 다량의 폐필터를 가장 효율적으로 저장 할 수 있는 최적의 설비이며, 폐필터 장입, 인출 시 작업시간단축, 작업자 피폭저감, 오염확산 방지는 물론 폐기물을 감용시켜 폐기물처리, 처분 비용 절감에 기여하고자 한다.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.246-248
• /
• 1988

The electrical insulation characteristics of the Epoxy resin is generally depended upon the cross-Link. Therefore, when the Epoxy is cured the full cross-Link must be gotten to obtain the best electrical insulation property. This paper alms at examining the cure condition to get the best cross-link. The Epoxy used in this experiment is DGEBA, the curing materiel is MNA, and the accellator is tertiary amine. In this study, the best curing condition of cross-link is suggested by analysing the each Epoxy resin which is differenty cured according Lo the variable temperatures and curing times.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1991.10a
• /
• pp.83-89
• /
• 1991

The partial discharge properties of interface layer in Mica-Epoxy composite, which has been mainly used for the coil insulating material of high voltage machinery, are different from those of resins due to the abnormal interface layer to be presented between inorganic material and resin. Accordingly, the study on discharge of interface in composite insulting system is strongly requsted for not only an increasing of insulating strength, but also the basical information of diagnosis system for high voltage equipment. As a result, it has been confirmed that the interface is an abnormal resin layer and the contact states at interface is depended upon the density of silane aqueous solution. Pulse frequency at abnormal interface shows a linear increasing with enlargement of discharge quantity. Whereas, in case of normal interface, pulse frequency property represents exponential increasing at the point of saturating. A life model can be diagramed from results of time dependance of skewness, and a survival life time can be quantified from the life model suggested.