• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.4
• /
• pp.294-303
• /
• 2018

To set an optimal harvest time for five main whole-crop silage (WCS) rice cultivars, Nokyang (Ny), Mogwoo (Mw), Mogyang (My), Nokwoo (Nw) and Yeongwoo(Yw), based on feed value and dry matter yield, we analyzed water content (WC), feed values such as percent crude protein (CP), crude fat (CF), crude ash (CA), neutral detergent fiber (NDF), acid detergent fiber (ADF), estimated total digestible nutrients (TDN), and calculated their dry matter yield (DMY). These parameters were estimated at the booting stage and every 10 days from start of heading to 45 days after heading (DAH) to identify the optimal harvest time for these rice varieties. In all varieties, except Ny, the WC was about 65% on the $30^{th}$ DAH. In terms of WC, it is judged that there would be no major problem in preparing high quality silage when harvested between 20~30 DAH for Ny and about 30 days for the other cultivars. The CP and CA decreased significantly as the harvest time was delayed in all varieties (p<0.05). However, the CF in the tested varieties generally declined as DAH increased, and then increased again(p<0.05). The decrease in ADF and NDF was significantly different from the booting stage to 45 DAH in all varieties (p<0.05) and the estimated TDN increased gradually in all varieties as the harvest time was delayed. The TDN of all varieties, except Nw, was over 70% around 30 DAH. As harvest time was delayed, the DMY for all WCS rice increased significantly (p<0.05). The maximum DMY for each cultivar was observed at 45 DAH, however, no significant difference (p<0.05) was seen after 40 DAH for Ny and Yw, 30 DAH for Mw and Nw, and 20 DAH for My. Considering these results and others factors such as lodging, shattering, digestibility of grains, conversion of eating rice, etc., the optimal harvest time for silage use of all WCS rice tested was generally the yellow ripening stage, at about 30 DAH (30~40 DAH for Ny and Mw, and 30 DAH for My, Nw and Yw).

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1120-1133
• /
• 2018

The purpose of this study is to validate the failure attribution factors affecting emotional changes after a failed service by local restaurant users, and the relapse effects of the perceived failure of a customer's brand relationship. In this study, the implications of this study can be divided into the null theory and the homogenous theory, in which the study of the relationship between individual belief that influences the null theory and the post-gender emotional response is minimal. The independence of the crash response (angerous VS compassion) has been equally validated as building a belief-gathering-emotion three-step model. First, emotional BRQ (intimate and love) has a reduction effect on controllable geeks, and behavioral BRQ (relative existence) has an extended effect on controllable geeks. From a management perspective, restaurant managers should be less aware of the repeatability of a customer's service failure and call for customer sympathy. Integratedly, restaurant managers must control the customer's perception of service failure and restore the impact of the customer's BRQ on emotional reactions. A variety of service recovery measures should be established and the cerumen should be controlled. In addition, since BRQs have different effects on anger and sympathy (extended VS), different service failure recovery plans should be presented depending on the characteristics of the customer BRQ. For example, measures such as monetary compensation or fair dealing, emotional distribution to close and loving customers, and persuasion of reciprocal benefits to interdependent customers should be developed according to circumstances. This study explored the effectiveness of the geeks after a service failure and has limitations that do not take into account the various regulatory factors in the BRQ-return-Empression process. Thus, in further studies, the effects of adjusting service failure strength should be considered and a more complete model should be built.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.498-506
• /
• 2019

This study is based on a coating method that provides utilization value as a micronised powder for cosmetic raw materials using natural minerals buried in Bonghwa, Gyeongsangbuk-do in Korea. The mineral powder name is called Buseok, and chemical name is pumice powder. The results of a study on the efficacy of cosmetics are reported by the development of particulate powder to assess the performance of this powder. First of all, in order to coat the surface of this powder with oil, aluminum hydroxide was coated on the particulate surface and then coated with alkylsilan. In addition, it was coated with vegetable oil to prevent condensation of the powder and increase the dispersion in the oil phase. First; the particle size of pumice powder was from 10 to 50mm having porous holes on the surface of the particles. Second; The components of this powder contained $SiO_2$, $Al_2O_3$, $Fe_2O_3$, MgO, CaO, $K_2O_2$, $Na_2O$, $TiO_2$, $TiO_2$, MnO, $Cr_2O_3$, $V_2O_5$. Third: The particles of this powder have a planetary structure and are reddish-brown with porosity through SEM and TEM analysis. Fourth; the far-infrared radiation rate of this parabolic powder was $0.924{\mu}m$, and the radiative energy was $3.72{\times}102W/m^2$ and ${\mu}m$. In addition, the anion emission is 128 ION/cc, which shows that the coating remains unchanged. Based on these results, it is expected to be widely applied to basic cosmetics such as BB cream, cushion foundation, powderfect, and other color-coordinated cosmetics, sunblock cream, wash-off massage pack as an application of cosmetics. (Small and Medium Business Administration: S2601385)

• Journal of the Korean Society of Radiology
• /
• v.13 no.3
• /
• pp.359-369
• /
• 2019

To evaluate the effect of simultaneous use of platelet glycoprotein IIb / IIIa receptor blocker and catheter assisted thrombus aspiration in the treatment of coronary stent thrombosis. 267 patients ($64.6{\pm}12.1years$, 187 men) with stent thrombosis on coronary angiography at Chonnam National University Hospital from July 2008 to July 2017 were enrolled. We devided two groups based on treatment modalities: Group I (N=32, platelet glycoprotein IIb / IIIa receptor blocker and thrombo-aspiration), Group II (N =235, either platelet glycoprotein IIb /IIIa receptor blocker or thrombo-aspiration, or none of both), and the major cardiac events including death, revascularization and stent thrombosis were followed up for 1 year. There were no significant differences in clinical characteristics between the two groups including age (Group I: $60.8{\pm}12.9$ vs. Group II: $65.1{\pm}11.9$, p= 0.603), male (Group I: 75.0% vs. Group II: 69.4%, p=0.681), and left ventricular ejection fraction (Group I: $58.1{\pm}9.0%$ vs. Group II: $59.5{\pm}11.9%$, p= 0.127). The major cardiac events did not differ between the two groups (Group I: 12.5% vs. Group II: 23.8%, p=0.180). The secondary endopoints were as followings: The mortality rate (Group I: 0% vs. 13.2%, Group II: p=0.034), target lesion revascularization (Group I: 9.4% vs Group II: 6.4%, p=0.461) and stent thrombosis (Group I: 3.1% vs. Group II: 4.7%, p=1.000). In conclusion, in the treatment of coronary artery stent thrombosis, simultaneous use of platelet glycoprotein IIb / IIIa receptor blocker and thrombus aspiration was associated with better clinical outcomes regarding 1 year mortality.

• Clean Technology
• /
• v.25 no.3
• /
• pp.256-262
• /
• 2019

Hydroxylammonium nitrate (HAN)-based liquid propellants are attracting attention as environmentally friendly propellants because they are not carcinogens and the combustion gases have little toxicity. The catalyst used to decompose the HAN-based liquid propellant in a thruster must have both low temperature activity and high heat resistance. The objective of this study is to prepare an Ru/alumina/metal foam catalyst by supporting alumina slurry on the surface of NiCrAl metal foam using a washing coating method and then to support a ruthenium precursor thereon. The decomposition activity of a HAN aqueous solution of the Ru/alumina/metal foam catalyst was evaluated. The effect of the number of repetitive coatings of alumina slurry on the physical properties of the alumina/metal foam was analyzed. As the number of alumina wash coatings increased, mesopores with a diameter of about 7 nm were well-developed, thereby increasing the surface area and pore volume. It was optimal to repeat the wash coating alumina on the metal foam 12 times to maximize the surface area and pore volume of the alumina/metal foam. Mesopores were also well developed on the surface of the Ru/alumina/metal foam catalyst. It was found that the metal form itself without the active metal and alumina can promote the decomposition reaction of the HAN aqueous solution. In the case of the Ru/alumina/metal foam-550 catalyst, the decomposition onset temperature was significantly lowered compared with that of the thermal decomposition reaction, and ${\Delta}P$ could be greatly increased in the decomposition of the HAN aqueous solution. However, when the catalyst was calcined at $1,200^{\circ}C$, the catalytic activity was lowered inevitably because the surface area and pore volume of the catalyst were drastically reduced and Ru was sintered. Further research is needed to improve the heat resistance of Ru/alumina/metal foam catalysts.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.108-119
• /
• 2018

"The Collection of Yi Chungmugong" manuscript is a hand-written manuscript of the volume 1 consisting of the Collection, published in 1795 and it seems to have completed the contents of the book by correcting the first part of the book before print. The book adopted a form of Seonjangbon(線裝本) of Ochimanjeongbeop(五針眼訂法) and was urgently needed some measures to preserve because it has been much damaged by stains, loss and oxidation due to moisture on the bottom of it. In addition, a scientific investigation was applied to find out the features of the quality of paper and fiber used for the book, which would be reflected in the process of the preservation. The characteristics of paper were measurmented for size(cm), thickness(mm), weight(g), basis weight($g/m^2$), density($g/cm^3$), chain line and laid lines($3{\times}3cm$). The measurement showed that the characteristics of paper used in royal books published in the late Joseon Dynasty. For the paper-fiber of the book, C stain was used and the technique revealed that the book is made of bast fibre of paper mulberry and its binding strings are cotton. SEM-EDS analysis was performed to verify the existence of additives in paper. As a result of the analysis, The crystallized calcium was detected in addition to the main components carbon(C) and oxygen(O). This artifact is the unique final version of "The collection of Yi Chungmugong", which has considerable value in terms of academic research, besides it helps to understand how to print books of Joseon Dynasty. And it also has a very accurate information of when and where the book was made, which primarily could be resources to conserve and restore for other book heritage.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.129-156
• /
• 2005

Increasing discovery cases of underground storage facilities made of earth, wood, or stone are being reported from the recent excavation survey of the Baekje relics. Accordingly, the purpose of this study is to examine the structure and function of the underground storage facilities of Baekje following a classification made by the type and building method as follows: plask shape, wooden box shape, and stone box shape. The plask shape storage is the most representative underground storage of Baekje that has been found in numerous relics more than 600 sets around Hangang(Han River) and Geumgang(Geum River) from the Hansung period to Sabi period in Baekje Dynasty. It is a historical artefact as a part of the unique storage culture of Baekje around Hangang and Geumgang from the 3rd to 7th Century. Considering its structure and the example of Chinese one, it might had been used for a long-term storage of grains and various other items including earth wares. The storage facility in wooden box shape and stone box shape are found mostly in the relics Of Sabi period. Thus it might had taken some functions of the storage in traditional pouch shape which had decreased after the 6th Century. In particular, the wooden box shape and stone box shape storage required enormous labor force to build owing to their structure and building method. Thus, they were considered to had been used for official purposes in province fortress and citadel artefact. The wooden box shape storage facility is classified into flat rectangular type and square type based on the structure, and into Gagu type(架構式) and Juheol type(柱穴式) based on the building method. It might had been decided according to the geography and geological feature of the place where the storage was to be built. Considering the examples of Gwanbuk-ri relics and Weolpyong-dong relics, the wooden box shape storage facility might had been used for various items depending on the needs, including foods such as fruits and essential provisions at the military base. Considering the long-term food storage, the examples in Japan, and the functional characteristics of the underground storage facility, there is a possibility that the wooden and stone box shape storage facilities had been built so as to safely store important items in case of fire. This study is only a rudimentary examination for the storage facility in Baekje. Thus further studies are to be made specifically and comprehensively on the comparison with other regions, distribution pattern, discovered relics and artefacts, and functions.

• The Korean Journal of Archival Studies
• /
• no.33
• /
• pp.155-206
• /
• 2012

Interests in archives management are getting expanded from the public sector into the cultural and artistic field for the ten years after legislation of "Act on the Management of Public Archives" in 1999. However, due to lack of recognition on the importance of archives in the cultural and artistic field, it is rather frequent that information is kept scattered or archives are lost. As an example, absence of precise contract documents or notes of bestowal keeps people from locating great amount of cultural properties, and because of it these creative properties are in the risk of thefts, the closed-door auctioning, or trades in unofficial channels. As how a nation manages cultural and artistic creation inside the nation reflects its cultural level, it can be said that one of the indexes to notice the extent of a nation's cultural level is to take a look at how they are circulated. This study started from this point. Growing economy and rising interests in culture and art made the society more cognizant of the importance and value that visual artworks have, but the archives and information which are showing the context of these artworks and are produced in the course of social interaction are relatively disregarded because too much emphasis lies on the work itself. It is harder to find archives or documentations in Korea than in other advanced countries about the artists themselves or philosophical discourse on the background of the artworks. There is not so much interest to preserve the archives and information produced after the exhibition also, and they are used for no more than promotion or reference. Hereupon, the researcher recognized the importance of visual arts archives and believed that systemic management on them are high in need. And metadata is an essential way for the systemic management, as recently management on artworks or their archives are conducted using the system of the agencies even though they are not produced electronically. The objective of this study is to manage visual arts archives systematically by designing a data model reflecting traits of visual arts archives. Metadata are needed in the every course of archives from acquisition to management, preservation and application. Visual arts archives find its rich value only when a systemic relationship is established among information on artist, artwork and events including exhibition. By establishing a Multiple Entity Data Model, in which artworks, artists and events (exhibitions) make relationship all together, metadata for management on visual arts archive gets more efficiency and at the same time explanatory trait of the archive gets higher. For this reason we, in the study, tried to design a data model by setting each as an independent entities and designating relations between them, in order to find a way to manage visual arts archives more systematically.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.67-76
• /
• 2019

With an increasing demand of timber production, the use of heavy machinery in forest management has significantly increased, causing the changes of soil physical properties and the decline of long-term site productivity. This study was conducted to evaluate the effects of logging slash (non-slash, slash $7.3kg/m^2$, and slash $11.5kg/m^2$) and machine passes(harvester 1 pass and forwarder 1 to 10 passes) on soil physical properties at 10 cm, 20 cm and 30 cm soil depths in harvester and forwarder operations and also to estimate the degree of soil surface disturbance. The results indicated that soil bulk density in the non-slash treatment site increased 10 %~29 % (25~139 % in soil penetration resistance) at all soil depths, compared with the slash treatment site(slash $11.5kg/m^2$). Therefore, the creation of a slash mat could be an effective way to minimize the changes of soil physical properties. In addition, 92 % of total soil compaction in slash treatment site was created within harvester 1 pass and forwarder 5 passes. In non-slash treatment site, 84 % of total soil compaction was created within first harvester and forwarder passes. The results showed that slash treatment was effective to reduce soil compaction caused by machine passes and also it is necessary to create designed forwarding trails for minimizing soil compaction area at timber harvesting sites.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.40-49
• /
• 2019

Coarse woody debris (CWD), which is a component of the forest ecosystem, plays a major role in forest energy flow and nutrient cycling. In particular, CWD isolates carbon for a long time and is important in terms of slowing the rate of carbon released from the forest to the atmosphere. Therefore, this study measured the physiochemical characteristics and respiration rate ($R_{CWD}$) of CWD for Larix kaempferi and Pinus rigida in temperate forests in central Korea. In summer 2018, CWD samples from decay class (DC) I to IV were collected in the 14 forest stands. $R_{CWD}$ and physiochemical characteristics were measured using a closed chamber with a portable carbon dioxide sensor in the laboratory. In both species, as CWD decomposition progressed, the density ($D_{CWD}$) of the CWD decreased while the water content ($WC_{CWD}$) increased. Furthermore, the carbon concentrations did not significantly differ by DC, whereas the nitrogen concentration significantly increased and the C/N ratio decreased. The respiration rate of L. kaempferi CWD increased significantly up to DC IV, but for P. rigida it increased to DC II and then unchanged for DC II-IV. Accordingly, except for carbon concentration, all the measured characteristics showed a significant correlation with $R_{CWD}$. Multiple linear regression showed that $WC_{CWD}$ was the most influential factor on $R_{CWD}$. $WC_{CWD}$ affects $R_{CWD}$ by increasing microbial activity and is closely related to complex environmental factors such as temperature and light conditions. Therefore, it is necessary to study their correlation and estimate the time-series pattern of CWD moisture.