• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.95-105
• /
• 2005

This study was carried out to file up using effect and requirement of energy for environmental design data of Pleurotus eryngii growing houses. Heating and cooling Degree-Hour (D-H) were calculated and compared for. some Pleurotus eryngii growing houses of sandwich-panel (permanent) o. arch-roofed(simple) type structures modified and suggested through field survey and analysis. Also thermal resistance (R-value) was calculated for the heat insulating and covering materials of the permanent and simple-type, which were made of polyurethane or polystyrene panel and $7\~8$ layers heat conservation cover wall. The variations of heating and cooling D-H simulated for Jinju area was nearly linearly proportional to the setting inside temperatures. The variations of cooling D-H was much more sensitive than those of heating D-H. Therefore, it was expected that the variations of required energy in accordance with setting temperature or actual temperature maintained inside of the cultivation house could be estimated and also the estimated results of heating and cooling D-H could be effectively used far the verification of environmental simulation as well as for the calculation of required energy amounts. When the cultivation floor areas are all equal, panel type houses to be constructed by various combinations of materials were found to by far more effective than simple type pipe house in the aspect of energy conservation maintenance except some additional cost invested initially. And also the energy effectiveness of multi-span house compared to single span together with the prediction of energy requirement depending on the level insulated for the wall and roof area could be estimated. Additionally, structural as well as environmental optimizations are expected to be possible by calculating periodical and/or seasonal energy requirements for those various combinations of insulation level and different climate conditions, etc.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.106-113
• /
• 2005

This study was carried out to develop a novel hydroponic medium far fruit vegetable crops by using waste synthetic fibers. In physical analysis of the synthetic fiber medium (SFM), the bulk density and percent solid phase were lower, while the porosity and water content were greater in comparison with the rockwool slab. The SFM had pH of 6.5 and EC of $0.03dS{\cdot}m^{-1}$ both of which are similar to those of the rockwool slab. The CEC of 0.39me/100mL of the SFM was lower than compared with 3.29me/100mL of the rockwool slab. However, concentrations K, Ca, Mg and Na were slightly higher in the SFM than those in the rockwool slab. The 'Momotaro' tomato crop in the SFM gave comparable plant height, stem diameter, days to first flowering, fruit weight and percent marketable yield as the rockwool slab. In the SFM and in the rockwool slab, mean fiuit weight were 182g and 181g, percent marketable yield were $93.8\%$ and $92.0\%$, respectively. The marketable yield per 10a in the SFM was 12,799 kg, which was $97\%$ of that in the rockwool slab. Growth parameters such as leaf length and width, leaf number, stem diameter and chlorophyll content of an exportable cucumber crop grown in the SFM and the rockwool slab were not different. Fruit weight was greater in the rockwool slab, while percent marketable yield was greater in the SFM. The marketable fruit yield per 10a of 5,062kg in the SFM was $2\%$ greater than that in the rockwool slab. $NO_3$ concentration in nutrient solution during the crop cultivation was higher in the SFM than in the rockwool slab, while concentrations $NH_4$, K, Ca, Mg and $SO_4$ were not different between the two media.

• The Korean Journal of Pesticide Science
• /
• v.9 no.4
• /
• pp.316-329
• /
• 2005

Mobility of pesticides can be occurred by run-off and leachate or soil erosion. It is one of the most important factors for environmental contamination, particularly in steep sloped-land as Gangwon alpine region. In this study, the mobility of seven pesticides in different slopes and soil textures was investigated by simulated rainfall under controlled conditions. Simulated rainfall subjected to 60 mm $hr^{-1}$ was treated using rainfall simulator after 12 hr of pesticide treatment. Amounts of the pesticides were measured in run-off and leachate samples. The soil samples collected after rainfall from upper and lower parts and three different depths of sloped-plot were also analyzed. At result, all pesticides from the un-off samples collected from Taebaek(silty clay loam) and Heongseong(sandy loam) soils were detected maximum 96% within 60 minutes after first collection except carbendazim and cypermethrin which have the lowest water solubilities. From the leachate samples, a similar pattern was shown as run-off samples but amount of pesticides was lower than those of run-off samples. In soil samples, the order of the amount of pesticide residues was $0{\sim}5$ > $5{\sim}10$ > $10{\sim}15$ cm of soil depth and no pattern was shown in upper and lower, and different slopes. Comparing to mobility of pesticides in water and soil samples, pesticides in soil samples were higher than those of water samples in Taebaek soil. However, the results using Heongseong soils were in contrast to those of Taebaek soil. These results revealed that mobility of pesticides can be dependant mainly on soil textures and physicochemical properties of pesticides. Therefore, it can be suggested that selection of pesticides should be considered for soil texture and properties of pesticide in the alpine and sloped-land.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.1
• /
• pp.19-26
• /
• 2017

Purpose: The application of density override is very important to minimize dose calculation errors by fiducial markers of metal material in proton treatment plan. However, density override with actual material of the fiducial marker could make problem such as inaccurate target contouring and compensator fabrication. Therefore, we perform density override with surrounding material instead of actual material and we intend to evaluate the usefulness of density override with surrounding material of the fiducial marker by analyzing the dose distribution according to the position, material of the fiducial marker and number of beams. Materials and Method: We supposed that the fiducial marker of gold, steel, titanium is located in 1.5, 2.5, 4.0, 6.0 cm from the proton beam's end of range using water phantom. Treatment plans were created by applying density override with the surrounding material and actual material of the fiducial marker. Also, a liver cancer patient who received proton therapy was selected. We located the fiducial marker of gold, steel, titanium in 0, 1.5, 3.5 cm from the proton beam's end of range and the treatment plans were created by same method with water phantom. Homogeneity Index(HI), Conformity Index(CI) and maximum dose of Organ At Risk(OAR) in Planning Target Volume(PTV) as the evaluation index were compared according to the material, position of the fiducial marker and number of beam. Results: The HI value was more decreased when density override with surrounding material of the fiducial marker was performed comparing with density override with actual material. Especially the HI value was increased when the fiducial marker was located farther from the proton beam's end of the range for a single beam and the fiducial marker's position was closer to isocenter for two or more beams. The CI value was close to 1 and OAR maximum dose was greatly reduced when density override with surrounding material of the fiducial marker was performed comparing with density override with actual material. Conclusion: Density override with surrounding material can be expected to achieve more precise proton therapy than density override with actual material of the fiducial marker and could increase the dose uniformity and target coverage and reduce the dose to surrounding normal tissues for the small fiducial markers used in clinical practice. Most of all, it is desirable to plan the treatment by avoiding the fiducial marker of metal material as much as possible. However, if the fiducial marker have on the beam path, density override of the surrounding material can be expected to achieve more precise proton therapy.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.1
• /
• pp.79-88
• /
• 2002

Purpose: In this prospective, randomized study, we compared the results of early motion versus conventional immobilization after the arthroscopic Bankart repair. Materilal and Methods : We performed an arthroscopic Bankart repair using suture anchors in 62 patients with traumatic anterior shoulder instability and randomized them into two groups; Group 1 (n=28; mean age, 28 years) underwent three-week of immobilization and conventional rehabilitation program, while Group 2 (n=34; mean age, 29 years) underwent an accelerated rehabilitation program with staged range of motion and strengthening exercises starting from the immediate postoperative day. Selected patients were non-athletes with a classic Bankart lesion and a robust labrum. Analysis of outcome included pain scores (6-week and follow-up: 31(9 months), range of motion, return to activity, recurrence, patients’ satisfaction with each program, and shoulder scores (ASES, UCLA, and Rowe). Results : The recurrent rate was not different between the two groups (2 anterior apprehension from each group) (p=0.842). Patients with accelerated rehabilitation resumed functional range-of-motion faster and returned earlier to the functional level of activity (p<0.05). Accelerated rehabilitation decreased postoperative pain and more patients were satisfied with this program (p<0.05). No differences were found between the two groups at the follow-up with regards to the shoulder scores, return to activity, pain score, and the range-of-motion. Conclusions : Early mobilization after arthroscopic Bankart repair does not increase the recurrence rate in selected patients. Although the final outcomes are similar in both groups, the accelerated rehabilitation program promotes functional recovery and reduces postoperative pain, which enables patients an early institution of desired activities.

• Journal of Nutrition and Health
• /
• v.49 no.5
• /
• pp.277-287
• /
• 2016

Purpose: This study was performed to compare total phenolic contents, in vitro antioxidant capacity, and reduction effect of Korean food groups on ex vivo DNA damage in human cells and analyze correlations between each indicator. Methods: Vegetable foods in the Korean diet based the results of the KNHANES V-2 (2011) were classified into 10 food groups: cereals, fruits, vegetables, nuts, kimchi, seaweeds, potatoes, mushrooms, legumes, and oils. Eighty-four foods constituted more than 1% of the total intake in each food group and finally designated as vegetable foods in the Korean diet. Total phenolic content of each food group was measured. Further, in vitro antioxidant capacity was measured based on DPPH radical scavenging assay, TEAC assay, and $ORAC_{ROO{\cdot}}$ assay. Ex vivo DNA damage in human lymphocytes was assessed using comet assay. Results: Total phenolic contents of food groups of the Korean diet increased in the order of mushrooms, fruits, vegetables, seaweeds, and kimchi. Meanwhile, antioxidant rankings of food groups as mean values from the three in vitro test methods increased in the order of mushrooms, seaweeds, vegetables, kimchi, and fruits. Protection against ex vivo DNA damage in human lymphocytes was highest in mushrooms, followed by vegetables, fruits, seaweeds, and kimchi. The rankings of the food groups for total phenolic content, in vitro DAC, and ex vivo DNA protection activity were similar, and correlations between each indicator were significantly high. Conclusion: Mushrooms, fruits, vegetables, and seaweeds among the tested food groups in the Korean diet showed high total phenolic contents, in vitro antioxidant capacities, and protection against DNA damage. Correlations between each indicator in terms of total phenolic content, in vitro antioxidant capacity, and ex vivo DNA protection between each food group were found to be particularly high.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.130-136
• /
• 2009

The aim of this study was to develop a method for measuring the slumping resistance of flowable resin composites and to evaluate the efficacy using rheological methodology. Five commercial flowable composites (Aelitefil flow:AF, Filtek flow:FF, DenFil flow:DF, Tetric flow:TF and Revolution:RV) were used. Same volume of composites in a syringe was extruded on a glass slide using a custom-made loading device. The resin composites were allowed to slump for 10 seconds at $25^{\circ}C$ and light cured. The aspect ratio (height/diameter) of cone or dome shaped specimen was measured for estimating the slumping tendency of composites. The complex viscosity of each composite was measured by a dynamic oscillatory shear test as a function of angular frequency using a rheometer. To compare the slumping tendency of composites, one way-ANOVA and Turkey's post hoc test was performed for the aspect ratio at 95% confidence level. Regression analysis was performed to investigate the relationship between the complex viscosity and the aspect ratio. The results were as follows. 1. Slumping tendency based on the aspect ratio varied among the five materials (AF

• Applied Biological Chemistry
• /
• v.49 no.3
• /
• pp.227-232
• /
• 2006

Styela clava (also called as rough sea squirt or leathery tunicate) is regarded as native to the northwest Pacific region including Korea and widely distributed in parts of northwestern Europe, North America and Australia. To evaluate Styela clava as a potential bioactive agent, the antioxidant activity of aceton extracts from Styela clava (whole, substance and tunic) was tested by measuring inhibitory effect of $H_2O_2$ induced DNA damage using comet assay. Also, anticancer activity on human colon cancer cell (HT-29) was investigated by MTT reduction assay. The $200\;{\mu}M$ $H_2O_2$ induced DNA damage was inhibited with Styela clava aceton extract in dose dependent manner in human leukocytes. The maximum inhibition was by 62.8, 62.1 and 78.3% at the concentration of $50\;{\mu}g/ml$ of whole, substance and tunic extracts, respectively. The aceton extracts from S. clava were also found to inhibit the growth of human colon cancer cell. The cell proliferation rates decreased to 26.9, 30.6 and 12.0% at the concentration of $500\;{\mu}g/ml$ of whole, substance and tunic extracts, respectively. These results support that aceton extracts from S. clava may be a potential candidate as a possible antimutagenic and chemotherapeutic agent.

• Applied Biological Chemistry
• /
• v.17 no.3
• /
• pp.219-234
• /
• 1974

A series of experiments was conducted to study the behavior of the phosphorus added to the soils having the high phorphorus fixing capacity derived from volcanic ash in Cheju Island. Soil samples were taken from different depths of 0-10, 10-30, and 30-50cm in six citrus orchards where heavy application of phosphate fertilizer has been practised. Various forms of phosphorus were determined and phosphorus adsorption experiments were performed. The results obtained can be summarized as follows: 1. The content of inorganic phosphorus fractions determined by the method of Chang and Jackson was: water soluble P

• Applied Biological Chemistry
• /
• v.7
• /
• pp.21-27
• /
• 1966

This experiment was performed to investigate the effect of the frequency of meals on the metatolism and the body composition of rats when equal amount of purified diet was ingested. Thirty approximately days old rats weighing 290 g and thirty-two about 40 days old rats weighing 180 g were employed for the period of 34 days. Rats fed ad libitum (10 to 15 meals per day) and two-meal per day were pair-fed and equal amount of diet was fed to each rat in pair. The experimental results obtained are summarized as follows: 1. Frequency of meal did not exert any effect on the body weight gain. However, rats fed two-meal per· day gained significantly (p <0.005) more fat and energy than ad libitum group. The rate of gain of protein in ad libitum group was higher than that of two-meal group. No difference was observed for the mineral deposition of rat body. 2. From the preperation of rat liver it was found that the activity of glucose-6-phosphate dehydrogenase was much higher for the rats fed two-meals per day than those fed ad libitum. Therefore, it is suggested that the metabolic pathway of carbohydrate for two-meal group has been shifted from glycolysis to Hexose Monophosphate Shunt and produced more NADPH which would be the essential cofactor of fatty acids synthesis. 3. The rate of excretion of urinary nitrogen for two-meal group was significantly (p<0.005) higher than that of ad libitum group. It is apparent that considerable amount of over-loaded amino acids by feeding two-big-meal daily· could not be used for the protein biosynthesis all at once and excreted following deamination through urine. The residual carbon chain could be served as a precursor of fatty acids synthesis. 4. The heat production rate of rats fed two-meal group was significantly (p<0.005) lower than that of ad libitum group. It seems possible that the activity of thyroid gland (and consequently BMR) can be depressed by the frequency of meal.