• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.2
• /
• pp.75-82
• /
• 1987

This study was to investigate physicochemical and microbial changes that took place during the salting of chinese cabbages. Salinity(3%) that is suitable for kimchi preparation was reached when chinese cabbages were salted for seven hours in 10%, three hours in 15% and one hour in 20%. In the case of 5% it was not reached though they were salted for over twelve hours. In order to decrease salinity from 7% level of salted chinese cabbages to 3% level by soaking in tap water, 1.2 hours for leaf and three hours for patiole were spent. Volume, moisture, firmness and internal space of raw chinese cabbages were significantly decreased by salting (15%, 10 hours) : volume, 59.90%, moisture, about 31.92% and internal space rate, 35.06%. Contents of mono-and divalent cations$(K^+,\;Mg^{2+}\;and\;Ca^{2+})$ were reduced whereas $Na^+$ content was greatly increased; therefore, in the future the increase of Na-content remains open to question. By salting and washing, mold, yeast and bacteria were decreased by 58%, 40%, 45%, respectivity.

• Journal of the Korea Concrete Institute
• /
• v.18 no.6 s.96
• /
• pp.785-791
• /
• 2006

The purpose of this study is to clarify the effect of the monomer ratio on properties of the polymer-modified mortars based on styrene and butyl acrylate latexes, and to obtain basic data necessary to develop appropriate latexes for cement modifiers. This paper deals with the effects of monomer ratio on the typical properties of the polymer-modified mortars with styrene and butyl acrylate latexes. The polymer-modified mortars using the styrene and butyl acrylate latexes polymerized with various monomer ratios are prepared with different polymer-cement ratios, and tested for the particle size of polymer latexes, air contents, water-cement ratios, flexural and compressive strengths, water absorption, and chloride-ion penetration. From the test results, the polymer-modified mortars using styrene and butyl acrylate latexes with the mix proportions of synthesis having monomer ratios of 50:50 to 60:40 for the appropriate mix proportions can be recommended for practical applications. Their basic properties are greatly affected by the polymer-cement ratio rather than the monomer ratio, and are improved over un-modified mortar.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.345-352
• /
• 2017

Heavy weight concrete can be used in marine concrete structure to improve resistance against high wave energy. However, heavy weight aggregate, which is an indispensable material for heavy weight concrete, is difficult to be supplied in large quantities because its use is limited due to its high cost. In this work, the applicability of heavy weight by-products, copper and 3 month aged steelmaking slags, were evaluated as sources of heavy weight aggregate for marine concrete structures. Experimental results showed that copper slag was found to be a stable material for marine concrete structure. However, 3 month aged steelmaking slag showed significant expansion by $80^{\circ}$ water immersion test and ASTM C 1260 test. In addition, depth of chloride ion penetration in concrete was higher at which steelmaking slags were located. It was associated with porosity of steelmaking slag, and for this reason, steelmaking slag was not found to be suitable for marine concrete structure.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.1
• /
• pp.36-41
• /
• 1983

These studies were carried out to investigate the effects of potassium salts on the changes of chemical properties in submerged soil. Rice plants were cultured in submerged soil using potassium salts. Obtained results were as follows. In the submerged soil cultured with rice plants the value of pH was higher in the potassium chloride plot than in the potassium sulfate plot. The leaching of cations such as calcium, magnesium, potassium and ammonium were higher in the potassium chloride plot than in the potassium sulfate plot. On the other hand, the leaching of phosphate ion was slightly higher in the potassium sulfate plot than in the potassium chloride plot. The leaching of iron was higher in the planted plot than in the non-planted plot, but that of silica was higher in the non-planted plot than in the planted plot. However, the leaching of iron and silica was not affected by potassium salts.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.3
• /
• pp.140-148
• /
• 2016

This study examined the durability of face-slab concrete in Concrete-Faced Rock-filled Dams(CFRDs). The durability of face-slab concrete can be improved by optimizing the amount of fly ash in the cement mixture. Durability tests including plastic shrinkage, permeability, abrasion resistance, and repeated freezing and thawing were done on face-slab concrete specimens with different amounts of fly ash and blended PVA(Poly Vinyl Alcohol) fibre. When the effect of the fly ash content on concrete durability was evaluated, the results showed that a 15% fly ash content and 0.1% blended PVA fiber yielded the optimum durability level for concrete-faced rock-filled dams.

• Analytical Science and Technology
• /
• v.8 no.2
• /
• pp.107-116
• /
• 1995

The critical micelle concentration(CMC) of CTAB was determined with changes in absorbance at 202nm band of 4-biphenyl acetate($BPA^-$). With $BPA^-$ as a probe, the effect of temperature on CMC of CTAB has been observed between $30^{\circ}C{\sim}70^{\circ}C$. In this range of temperature the values of CMC are $1.18{\times}10^{-4}{\sim}2.02{\times}10^{-4}M$. The free energy(${\Delta}G^{\circ}m$) and enthalpy(${\Delta}H^{\circ}m$)for the micellization of CTAB was negative and the entropy(${\Delta}S^{\circ}m$) was a large positive value. The micellization of CTAB is considered as a spontaneous process and to involve a phase transition. The orientational binding of 4-biphenyl acetate anion to the CTAB micelle interface has been studied with $300MHz\;H^1-NMR$ data. The change in chemical shift of proton in CTAB as well as those of the protons in $BPA^-$ have been investigated by increasing the mole fraction of the anion in the mixed solutions. The changes in chemical shift with increasing mole fraction of anion($BPA^-$) indicate the formation of mixed micelle between CTAB and $BPA^-$. The changes in chemical shifts of methylene protons in CTAB, demonstrate the penetration of $BPA^-$ into the palisade layer of the CTAB micelle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.71-72
• /
• 1998

반도체 집적 공정의 발달로 차세대 소자용으로 30 A 이하의 극 박막 Si02 절연막이 요구되고 있으며, 현재 제품으로 50-70 A 두께의 절연막을 사용한 것이 발표되고 있다. 절연막의 두께가 앓아질수록 많은 문제가 발생할 수 있는데 그 예로 절연막의 breakdo때둥에 의한 신뢰성 특성의 악화, 절연막올 통한 direct tunneling leakage current, boron풍의 dopant 침투로 인한 소자 특성 ( (Threshold Voltage)의 불안, 전기적 stress하에서의 leakage current증가와 c charge-trap 및 피terface s쩌.te의 생성으로 인한 소자 특성의 변화 둥으로 요약 된다. 절연막의 특성올 개선하기 위해 여러 가지 새로운 공정들이 제안되었다. 그 예로, Nitrogen올 Si/Si02 계면에 doping하여 절연막의 특성을 개선하는 방법 으로 고온 열처 리 를 NH3, N20, NO 분위 기 에서 실시 하거 나, polysilicon 또는 s silicon 기판에 nitrogen올 이온 주입하여 열처리 하는 방법, 그리고 Plasma분 위기에서 Nitrogen 함유 Gas를 이용하여 nitrogen을 doping시키는 방법 둥이 연구되고 있다. 또한 Oxide cleaning 후 상온에서 성장되는 oxide를 최소화 하여 절연막의 특성올 개선하기 위하여 LOAD-LOCK을 이용하는 방법, C뼈피ng 공정의 개선올 통한 contamination 감소와 silicon surface roughness 감소 로 oxide 신뢰성올 개선하는 방법 둥이 있다. 구조적 인 측면 에 서 는 Polysilicon 의 g없n size 를 최 적 화하여 OxideIPolysilicon 의 계면 특성올 개선하는 연구와 Isolation및 Gate ETCH공정이 절연막의 특성에 미 치 는 영 향도 많이 연구되 고 있다 .. Plasma damage 가 Oxide 에 미 치 는 효과 를 제어하는 방법과 Deuterium열처리 퉁올 이용하여 Hot electron Stress하에서 의 MOS 소자의 Si/Si02 계면의 신뢰성을 개선하고 있다. 또한 극 박막 전연막의 신뢰성 특성올 통계적 분석올 통하여 사용 가능한 수명 올 예 측 하는 방법 과 Direct Tunneling Leakage current 를 고려 한 허 용 가농 한 동작 전 압 예측 및 Stress Induced Leakage Current 둥에 관해서 도 최 근 활발 한 연구가 진행되고 있다.

• The Journal of Korean Physical Therapy
• /
• v.12 no.2
• /
• pp.191-201
• /
• 2000

This study was investigated the effects of a direct current and ultrasound on transdermal transport of dexamethasone into the rabbits which had contusion in the thigh. Each group was treated under the tallowing conditions. 1. EXP group I : $10\%$ dexamethasone ointment and ultrasound 2. EXP group II : $1\%$aqueous solution of dexamethasone and iontophoresis 3. EXP group III : the application of $10\%$ dexamethasone ointment 4. Control group : No treatment The degree of anti-inflammation was evaluated by the naked eye, the change in girth of thigh, and a light microscope. The results were as follows. 1.8y the naked eye. an inflammation sign was seen in all groups and especially. symptoms of redness. heat swelling were prominent in EXP group I. 2. In comparision in the change of girth of thigh, only EXP group II showed no significant change. Therefore, it meant that there was effective anti-inflammatory reaction in EXP group II. 3. The infiltration of inflammation cells, the degree of swelling, and the degree of crosslinking of connective tissues were evaluated with a light microscope. As a result, EXP group II showed the most effective anti-inflammatory reaction. And, in order of EXP group III, control group, the effect of anti-inflammation reaction was decreased. 4. EXP group I showed more intensive inflammation than control group.

• Journal of the Korean Vacuum Society
• /
• v.16 no.4
• /
• pp.286-290
• /
• 2007

We fabricated NiO coated ZnO nanorods using ZnO nanorods grown on a Si substrate. After thermal hydrogenation process of these NiO-ZnO core-shell nanorods, we confirm that Ni nanodots were built up on the surface of ZnO nanorods. Photoluminescence (PL) measurements at T=5 K were made to understand the optical properties of these various nanorods. As samples sequencially transformed into $ZnO{\rightarrow}NiO-ZnO{\rightarrow}Ni$ nanodot-ZnO, PL transition energies and intensities are varied as well. In comparison to pure ZnO nanorod, the acceptor bound exciton ($A^0X$) became the minor peak for NiO-ZnO nanorods. On the other hand, for Ni nanodot-ZnO sample, ($A^0X$) transition peak intensity became the most dominant peak. This is due to the fact that during thermal hydrogenation process, appreciable amounts of Ni and hydrogen ions defused into ZnO nanorod which played as accepters.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.448-448
• /
• 2012

최근에 pH 감지막의 감지감도특성을 평가하기 위해 electrolyte insulator semiconductor (EIS) 구조가 유용하게 이용되고 있다. EIS는 간단한 구조와 pH 용액에 빠른 응답속도, 낮은 단가 및 집적이 용이하다는 장점이 있다. EIS 구조에서 화학적 용액에 대한 감지감도 평가 중 가장 중요하게 작용하는 부분이 감지막이다. 이 감지막은 감지 대상 물질과 물리적으로 직접 접촉되는 부분으로서 일반적으로 기계적/화학적 강도가 우수한 실리콘 산화막($SiO_2$)이 많이 사용되어져 왔다. 최근에는 기존의 $SiO_2$ 보다 성능이 향상된 감지막을 개발하기 위하여 $Al_2O_3$, $HfO_2$, $ZrO_2$, 그리고 $Ta_2O_5$와 같은 고유전 상수(high-k)를 가지는 물질들을 EIS 센서의 감지막으로 이용하는 연구가 활발하게 진행되고 있다. High-k 물질 중 $Al_2O_3$는 산성에서 알칼리성 영역까지의 넓은 화학안정성을 가지며 화학용액에 대해 내구성이 우수한 특성을 가진다. $HfO_2$은 내식성이 뛰어나며 출력특성이 높은 장점을 가진 물질이다. 본 실험에서는 특성이 다른 두 물질을 EIS의 감지막으로 각각 사용하여 두께에 따른 의존성을 평가하였다. 제작한 EIS 구조의 pH 센서를 바이오 센서에 적용하였을 때 신호대 잡음비(SNR: signal to noise)가 여전히 취약하다는 문제점이 있었다. 이런 문제점을 보완하기 위하여 감지막의 물리적 두께는 점점 얇아지게 되었고 그 결과 높은 출력 특성을 얻게 되었지만, 감지막이 얇아짐에 따라서 화학 용액 중의 이온 침투로 인한 감지막 자체의 손상 또한 심각한 문제로 대두되었다. 이로 인해 최적화 된 감지막의 두께를 얻을 필요가 있다. 결론적으로 $Al_2O_3$, $HfO_2$ 두 감지막 모두 두께가 23 nm일 때 가장 우수한 특성을 보였으며, $Al_2O_3$를 감지막으로 사용하였을 경우 화학적 용액에 대해 내구성이 뛰어났고, $HfO_2$을 사용하였을 때에는 화학적 용액에 대한 안정성 보다는 pH 용액변화에 따른 향상된 감지감도특성을 보였다.