• Journal of the Korean Vacuum Society
• /
• v.16 no.4
• /
• pp.262-266
• /
• 2007

Polycrystalline $Mn_xFe_{3-x}O_4$ thin films were synthesized on Si(100) substrates using sol-gel method and the effects of Mn substitution on the structural, magnetic, and magnetotransport properties were analyzed. X-ray diffraction revealed that cubic structure is maintained up to x = 1.78 with increasing lattice constant for increasing x. Such increase of the lattice constant is attributable to the substitution of $Mn^{2+}$ (with larger ionic radius) ions into tetrahedral $Fe^{3+}$(with smaller ionic radius) sites. VSM measurements revealed that $M_s$ does not vary significantly with x, qualitatively explainable by comparing spin magnetic moments of Mn and Fe ions. On the other hand, $H_c$ was found to decrease with increasing x, attributable to the decrease of magnetic anisotropy due to the decrease of $Fe^{2+}$ density through $Mn^{2+}$ substitution. Magnetoresistance (MR) of the $Mn_xFe_{3-x}O_4$ films was found to decrease with increasing x. Analysis of the MR data in comparison with the VSM results gives an indication of the tunneling of spin-polarized carriers through the grain boundaries of the polycrystalline samples at low external field and spin-flip of the carriers at high external field.

• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.529-534
• /
• 2008

This study was conducted to determine the effects of ion water and premixed mineral supplementation on the growth performance, carcass, and meat quality parameters in finishing pigs (LY$\times$D). Each 20 pigs were randomly allotted to three treatments; CON (basal diet), T1 (CON diet added active water), T3 (T1 diet added 1.0% premixed mineral). Used ion water and premixed mineral consisted mainly of Zn and Si, respectively. Cholesterol content (mg% meat) were not differ significantly in the samples, however, the ratios of cholesterol to fat in T1 and T2 was significantly lower than the control (p<0.05). The fatty acid qualities of palmitic acid, linoleic acid, arachidonic acid, SFA (saturated fatty acid), EFA (essential fatty acid), and EFA/UFA ratio were the highest significantly, however, those of the oleic acid, UFA (unsaturated fatty acid), and UFA/SFA ratio were the lowest significantly in T2 (p<0.05). The amino acid levels of glutamic acid, alanine, leucine, lysine, total amino acids, and EAA (essential amino acid) were the highest in T1 (p<0.05). Whereas, the levels of serine, valine, isoleucine were the highest in T2 (p<0.05). The results indicate that dietary ionized water and premixed mineral affects fatty acid composition and improves amino acid composition.

• Journal of Korean Society of societal Security
• /
• v.4 no.2
• /
• pp.65-72
• /
• 2011

This study was carried out to investigate the cause of acidification of rainwater and to evaluate the possibility of alternative water resource in Saemangeum. The rainwater were collected in the kwangwhal-myun, Saemangeum from March to September, 2009. The collected 7 samples were analyzed with pH meter, IC (ion chromatography) and ICP (inductively coupled plasma) about the pH and the major ions ($SO{_4}^{2-}$, $NO_3{^-}$, $Cl^-$, $Ca^{2+}$, $K^+$, $NH^{4+}$, $Na^+$ and $Mg^{2+}$) of rainwater. The order of the major anion concentration and the acidification contribution in the rainwater was $SO{_4}^{2-}$>$NO_3{^-}$>$Cl^-$, and that of the major cation was $Ca^{2+}$>$K^+$>$NH_4{^+}$>$Na^+$>$Mg^{2+}$. In the initial rainwater, the major ions concentration were higher than the middle period. pH of the rainwater was the lowest at May, but similar to the results of the others. And pH of the rainwater were significant correlation with $SO{_4}^{2-}$ and $Cl^-$ in Saemangeum. From this results, the rainwater was slight acidic, and $SO{_4}^{2-}$ was the main factor contributed to the rainwater acidification in Saemangeum.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.495-500
• /
• 2009

Actinide sorption to the geological materials can reduce the mobility and bioavailability of radionuclides released to the environment through the development of nuclear weapons and nuclear energy. Under circumneutral pH conditions, actinide sorption can be enhanced by phosphate anions sorbed on oxide mineral surfaces as indicated by the sorption of trivalent lanthanide ions ($Ln^{3+}$), the chemical analog for trivalent actinide ions ($Ac^{3+}$). In this paper, we examined a ternary sorption system of trivalent europium ions ($Eu^{3+}$) sorbed onto boehmite (${\gamma}$-AlOOH) surfaces pre-sorbed with phosphate anions (${PO_4}^{3-}$), using extended X-ray absorption fine structure (EXAFS) spectroscopy. In the Eu-$PO_4$-boehmite ternary sorption system, $EuPO_4$ surface precipitates were formed as implicated by Eu $L_{III}$-edge EXAFS spectroscopy. Phosphorus K-edge EXAFS fingerprinting indicated a bidentate mononuclear surface complex formation of phosphate sorbed on boehmite surfaces as well as $EuPO_4$ surface precipitate formation.

• Analytical Science and Technology
• /
• v.24 no.1
• /
• pp.24-37
• /
• 2011

The ionic compositions of atmospheric aerosols were investigated and characterized in coastal and mountainous sites of Jeju Island, which were Gosan and Mt. Halla-1100 sites respectively. It was found that the concentrations of nss-$SO_4^{2-}$ (non-sea salt sulfate) and $NH_4^+$ at two measurement sites were almost similar and they showed high concentrations in June at the same time. The concentration of soil-originated nss-$Ca^{2+}$ (non-sea salt calcium) was generally associated with that of anthropogenic $NO_3^-$ and its concentration was increased during spring season. From the comparison of time-series variation and regression analysis of ionic species between two measurement sites, TSP (total suspended particulate) in Gosan site was directly influenced by sea salt particles and the concentration levels of nss-$SO_4^{2-}$, $NH_4^+$, nss-$Ca^{2+}$, $K^+$, and $NO_3^-$ were mainly related with long-range transported air pollutants rather than local pollution sources.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.42-47
• /
• 2013

Ferro-Nickel slag is a byproduct of Ferro-Nickel manufacturing process. Ferro-Nickel slag mostly discarded or used as aggregates despite having useful ingredients such as magnesium oxide and silicon oxide. This study tried to extract process for Mg ion using $H_2SO_4$ solution. And remove impurities and get high purity $Mg(OH)_2$ using NaOH. Mg ion was extracted with the Fe ion and other Ferro-Nickel slag composition by $H_2SO_4$ solution. It is important to control the pH because remove impurities and obtain high-purity $Mg(OH)_2$. The impurities were removed by precipitation of the hydroxides. After this process, we added NaOH and high-purity $Mg(OH)_2$ was obtained.

• The Journal of Engineering Geology
• /
• v.10 no.2
• /
• pp.150-171
• /
• 2000

In the Cheju Island, there are high salinity water yield in the coastal area. There are various reason; the main reason is low-groundwater level by the structure of geology, and over-yielding etc. This study analysis water quality, the distribution of high salinity wells. 16 sample well logged the electronic geology survey. As result of distribution of Cl$^-$ is the East Area is high than other areas. Water quality test data divides 6 group by sea level of well bottom: over Om, Om~-1Om, -10~-20m, -20~-30m, -30~-40m, under -40m. According collect data of Kriging, and logged the electronic geology survey, and other survey are related chlorine(Cl$^-$). The map of Cl$^-$ distribution was made. Bukcheju Gun, Hallim Up, there are 2 wells prevent high salinity water. Both of well are effective grout sill salinity water intrusion aquifer.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.51-57
• /
• 1999

Adsorption characteristics of Ni(II), Co(II) and Ag(I) ions on the Amberite IRN 77 cation exchange resin have been studied to suggest the guide-line for the optimum operation of demineralization process in primary coolant system during the shut-down period of pressurized water reactor(PWR). The adsorption mechanism of each metal ion, Ni(II), Co(II) or Ag(I) ion, on a cation exchange resin was well coincided with Langmuir isotherm. The adsorption and treatment capacities of $H^+$-form resin were higher than those of $Li^+$-form resin. In the continuous ion exchange process for the solution of multi-component system, the selectivity of the resin was in increasing order of Ni(II)${\approx}$Co(II)>Ag(I). In addition, the increase of the flow rate decreased the treatment capacity of the resin as well as the slope of the breakthrough curve.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.4
• /
• pp.256-263
• /
• 2012

This study was performed to investigate the separation of cesium cations by using an electrochemical ion exchanger of nickel hexacyanoferrate($KNiFe(CN)_6$) film electrode. Potential, current, and charge passing through the cyclic voltammograms were measured in singular and binary solutions of 1.0M $NaNO_3$ and 1.0M $CsNO_3$. Before and after each experiment, the structural morphology and atomic composition of $KNiFe(CN)_6$ were analyzed by SEM and EDS, respectively. The ion selectivity of $KNiFe(CN)_6$ was also observed by the voltammograms and atomic compositions measured in the solution alternated between sodium and cesium. As the result of this study, it was found that the electrically switched $KNiFe(CN)_6$ ion exchanger had the significant advantage of 40 times or longer durability than conventional organic or inorganic ion exchanger. It was also shown that the $KNiFe(CN)_6$ ion exchanger had high selectivity for cesium over sodium.

• Korean Journal of Materials Research
• /
• v.2 no.3
• /
• pp.213-219
• /
• 1992

The microstructure, dopant distribution and electrical properties of the $As^{+}$ ion-implanted surface layer differ significantly depending on the methods of subsequent heat treatments, furnace annealing(FA) and rapid thermal annealing(RTA). The amorphous layer created by ion implantation was recrystallized during the thermal annealing through solid phase epitaxial (SPE) growth. The dopant distribution and electrical properties are discussed with respect to the TEM cross-sectional microstructure observed. The microstructure, dopant distribution and electrical properties depended upon especially the annealing time of the heat treatment.