• Water for future
• /
• v.47 no.2
• /
• pp.87-97
• /
• 2014

해안의 침식저감은 해안보전 정책 중에서 가장 중요한 목표가 되고 있다. 하지만, 침식을 야기하는 요인의 다양성과 결과예측의 어려움 등으로 인하여 기존공법의 유효성에 많은 의문이 있다. 이러한 대응효과의 불확실성을 극복하는 하나의 방법으로서 해안모래의 사정에 따라 그때그때 조치하는 유연한 대응을 생각할 수 있는데 이러한 관리형 대응을 실현하기 위해서는 만족할 만한 핵심요소 기술이 필요하다. 최근 들어 구조형식이 간단하면서 경제적인 투과성 철재형 이안제가 개발되었다. 본 해안침식저감용 기술은 파랑제어가 수평판으로 가능하고 착탈식이며 이동이 간단하다. 이러한 특징을 활용하면 해안의 사정에 따라 관리할 수 있는 전략적 해안보전이 가능해 질 수 있다. 특히 본 구조물은 평균해수면 상승에 대해서도 추가비용이 거의 발생하지 않으므로 범용적 활용을 기대할 수 있어서 빠른 기술축척을 기대할 수 있다. 본 연구는 전략적 해안 보전 정책을 수행하기 위한 핵심요소기술의 적용성에 대하여 고찰하였다. 연구결과, 해안의 침 퇴적 사정에 따라 그때그때 파에너지의 투과율을 가변화시킴으로서 해안보호를 경제적으로 할 수 있음을 확인하였다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.209-218
• /
• 2011

The present study proposes a new estimation relationship for the transmission rate of the steel breakwater which is expected to make up for the weakness points in existing hard solution for shore protection. The steel breakwater consists of the wave dissipator of the dual horizontal plates, the supporting columns and their foundations, and thus its respective designs should also be conducted one by one. Furthermore, the breakwater has to ensure both functions of shore protection and structure stabilization. The study produced experimental data for the stability and safety investigation of the steel breakwater. The forces acting on the steel breakwater were classified into two categories, one is vertical up and down loads for the pile resistance and the other was maximum difference of the vertical load acting on horizontally different position for the torsion. The study applied the stability force produced by the summation of maximum pressure at each point and the safety force acting on each point simultaneously. The regular wave corresponding to the significant wave was utilized for measuring wave pressure and force. The study showed the method for the proper position of submerged upper plate by considering occurrence frequency of tide level. The design process finally determined by trial and error is proposed in the present study.

• Journal of Korean Port Research
• /
• v.15 no.1
• /
• pp.47-56
• /
• 2001

A numerical model for practical use based on the 1-line theory is presented to simulate shoreline changes due to construction of offshore structures. The shoreline change model calculates the longshore sediment transport rate using breaking waves. Before the shoreline change model execution, a wave model, adopting the modified Boussinesq equation including the breaking parameters and bottom friction term, was used to provide the longshore distribution of the breaking waves. The contents of present model are outlined first. Then to examine the characteristics of this model, the effects of the parameters contained in this model are clarified through the calculations of shoreline changes for simple cases. Finally, as the guides for practical application of this model, several comments are made on the parameters used in the model, such as transport parameter, average beach slope, breaking height variation alongshore, depth of closure, etc. with the presentation of typical examples of 3-dimensional movable bed experimental results for application of this model. Here, beach change behind the offshore structures is represented by the movement of the shoreline position. Analysis gives that the transport parameters should be taken as site specific parameters in terms of time scale for the shoreline change and adjusted to achieve the best agreement between the calculated and the observed near the structures.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.305-310
• /
• 1998

This research conducted concerning measures for the influence reduction to an investigation in the structure of offshore breakwater maintenance, an evaluation, a reexamination of the forecast, and a peripheral sediment transport environment. Furthermore, it aimed at the establishment of the beach transformation forecast method based on a hydraulic model study and a numeric simulation. A good result was obtained from a hydraulic model experiment and a numeric simulation as part of the basic research. And a qualitative evaluation of the flow field around the structure became possible since a numeric simulation examined flow field characteristics.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.2
• /
• pp.84-90
• /
• 1993

Iterative solution procedure (Conjugate Gradient Method, Panchang et al., 1991) is implemented for solving the complete mild slope equation for the spherical shoal and the coast with detached breakwater. The numerical results agreed well with the experimental data. The disadvantage that mild slope eguation could be solved only for small domains is now overcome by using this solution procedure. Moreover it can be easily applied to the coastal regions with complex geometry and structures, and needs not so much computer time as the conventional models.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.6
• /
• pp.408-415
• /
• 2016

Small fishing ports and coastal structures installed in a relatively low sea water depth disturb the wave induced current and cause the collapse of equilibrium state of sediment transport. These structures creates diffracted waves and matter the concentration of waves to cause the beach erosion. In order to mitigate these eroding problems on the beach, many counter measurements were proposed such as detached breakwater, groin or headland; however, these methods interrupt the aesthetic view of sandy beach due to the exposed structures above the sea level and have difficulty of applying to those beaches with the good scenery. Furthermore, some of these methods create secondary environmental problems after the installations. To eliminate these problems, one of the countermeasures, artificial reefs have been selected and used worldwide to minimize the disturbance of the scenery and secondary effects on the environment. Meanwhile, it is important to set the design elements for installing the artificial reefs such as that of length, opening width, clearing distances from the shoreline and more. Nevertheless, there are no construction manuals or standards for designing the artificial reefs with these important design elements yet. In this study, different conditions of artificial reefs were used with various cases throughout hydraulic model test to precisely analyze the changes of waves and currents to propose the standards of design elements to install the artificial reefs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.769-777
• /
• 2019

Low crested coastal structures such as detached breakwaters and submerged breakwaters (artificial reefs) have been commonly used as coastal protection measures. The armour units of these structures are unstable than those in non-overtopped structure cases. The stability of low crested structures armoured by rock has been suggested in existing studies. In this study, the stability of Tetrapods armour units on theses structures has been investigated using two-dimensional hydraulic model tests. The effect of wave steepness and freeboard on the armour stability on crest, front, and the rear slope has been investigated. Armour units were mostly damaged near the upper part of the seaward slope and the crest of the seaward side. From the experimental data, the new empirical formula for the stability coefficients of the Tetrapods was proposed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.2
• /
• pp.96-106
• /
• 2000

Though the recent years, large scale structures have been built on offshore for utilization of coastal ocean space as offshore airport and marine terminals. Sometimes, those big scale structures, however, happened to act as significant barriers against waves and severe beach erosion would take place on the coast. The present study deals nearshore topography changes affected by construction of an offshore structure with different distance from the shore. The series of three dimensional movable bed experiments have been examined in detail. Moreover, in order to make clear the relation of nearshore currents and local erosions behind offshore structure, the nearshore currents are calculated by Boussinesq equation model and compared with the same scale condition of the physical model experiments.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.219-228
• /
• 2011

In this paper, the design procedure of substructure of the steel-type breakwater was described and the actual foundation design was performed for the test bed. The site investigation was executed at the Osan-port area, in Uljin, Gyeongbuk, where the steeltype detached breakwater is constructed. The foundation mainly depends on the lateral load and uplift force due to the wave force. Since the superstructure is stuck out about 9.0m from the ocean bed, the foundation must resist on the lateral force and bending moment. After considering various factors, the foundation type of this structure was determined by the steel pipe pile(${\varphi}711{\times}t12mm$). On the stability of pile foundation, the safety factors of the pile on the compressive, lateral and uplift forces were grater than the minimum factor of safety. The displacements of pile under the working load were evaluated as the values below the permissible ones. Based on the subgrade reaction method, we evaluated the relationship of subgrade reaction and displacement for the lateral and the vertical directions in the layers. The structural analyses along with the foundation were perfomed and the effect of pile foundations were compared quantitatively.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.223-228
• /
• 2007

In recent trends of the enlargement and specialization, container ship, LNCG, PCC and passenger ship which have relatively large hull and superstructure above the water line, are already being operated in the world It is very important information for the safety operation of these vessels to estimate the ship's performance under the specific wind condition while berthing, unberthing or low-speed sailing. In this paper, the effect of wind force and moment acting on the training ship HANNARA is investigated by using the numerical calculations. The results of drift angle and counter rudder angle with the relative wind direction and force, the critical wind velocity with the ratio of wind velocity and ship's speed and maximum heeling angle with the wind velocity are shown The presented results can be applied directly to T/S HANNARA in berthing maneuver and avoiding typhoons, and utilized as an educational materials.