• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.10a
• /
• pp.63-64
• /
• 2010

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.39-45
• /
• 2009

The CRT(Cathode Ray Tube) displays have been substituted for FPDs(Flat Panel Displays) such as LCD(Liquid Crystal Display) and PDP(Plasma Display Panel) because they have a convex surface, large volume and heavy weight. The productivity of FPDs is greatly dependent on the area of thin glass panel with $0.6{\sim}0.8mm$ thickness because FPDs are manufactured by cutting a large-scaled thin glass panel with patterns to the required product dimensions. So FPD's industries are trying to increase the area of thin glass Panel. Through FEM(Finite Element Method) analysis and fluid analysis, we developed an non-contact and air-floating conveyor system which consists of transport-module, distributor, horizontal/vertical changer and controller for the 7th generation glass panel (2,200mm in width, 1,870mm in length and 0.7mm in thickness). The design technology developed in this study can be effectively applied to a conveyor system for a larger-scaled thin glass panel.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.162-163
• /
• 2009

본 연구에서는 초음파 진동자를 적용한 초극세사 자동 절단 시스템을 개발 하였다. 초극세사 자동 절단 시스템은 공진 주파수 28kHz를 가지는 초음파 진동자, 구동회로부, 원단 이송장치, 초음파 진동자 이송장치, 초극세사 원단과 에어실린더 사이의 정전기 발생을 방지하기 위한 정전기 제거장치, 구동모터, 및 절단 크기와 절단 속도 등을 조절하기 위한 전기제어 판넬로 구성하여 제작하였다. 또한, 개발한 절단 시스템을 이용하여 초극세사 클리너 시제품을 제작하여 절단면을 전자현미경으로 관찰하였고, 절단 시스템의 소음진동 특성을 평가하였다.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.135-141
• /
• 2020

The first case of Middle East Respiratory Syndrome (MERS) was reported in Korea in 2015, after a Korean man from Bahrain tested positive for the infection. After first eruption, there were numbers of secondary infectees and whole country were frightened. At the time, isolated ambulances were available but few, and there was no specific way to prevent contamination during transfer. Therefore, Seoul National University Hospital and the University of Seoul developed isolation units and air filters. Four years after the MERS outbreak, this study measured the differential pressure inside and outside the small isolation units based on the differential pressure and air flow derived from simulation and testing, and proposed minimum values for virus leakage and internal sealing. A performance evaluation and testing method for the transfer equipment is proposed. The critical function of the small isolated transport equipment was defined and selected as an evaluation item; performance evaluation was carried out by simulating a real-world case. The results provide the proper pressure configuration of positive and negative pressure inside the segregation feeder; the clear criteria for the HEPA filter; and the performance criteria for the segregation feeder and air purifier.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.638-645
• /
• 2014

This paper presents results of a study for development and application of container massive transportation system. The system is aimed to improve competing power of Korean container ports. This paper selects Double stack Multi-Trailer System (DMTS) under consideration of pros-con analysis between three systems alternatives as well as operation process of existing Korean container terminal companies. An analysis of turning radius is undertaken for applying the system. Key elementary technologies was derived by patent analysis. DMTS has no problems in utilization to existing Korean container ports. Further, the system is expected to highly potential to improve operational efficiency in the container ports thanks to its high unit transportation capacity.

• Journal of the Society of Disaster Information
• /
• v.14 no.1
• /
• pp.65-71
• /
• 2018

In this study, it is aimed to prevent the spread of pollutants in the event of a major disaster caused by CBRNE accidents and attacks and build up system to provide optimal transport environment for each patient condition By identifying characteristics of existing products and make them immediately applicable in the field. The purpose of this study is suggesting essential consideration in both functional and performance in the development of the isolation unit. As a result of the study, it suggests (1) basic function, (2) efficient field utilization, (3) isolation unit interface and combination of modules in development of isolation unit.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.41.2-41
• /
• 2004

본 발표에서는, 3차원 형상의 피스톤을 모방절삭이 아닌 CNC절삭을 행하기 위해 고속 이송계의 개발 사례를 다루었다. 여기서 다양한 고속 이송계의 구축형태와 적용 가능한 핵심요소 부품들을 비교하여 고속 이송 시스템으로서의 장단점을 검토하였다. 또한 타원형상의 가공물을 고속으로 처리하기 위한 소프트웨어와 제어보드에 대해 자세히 설명하였다. 비대칭 원형 절삭가공을 위한 장치개발이 공작기계 설계의 축소판이다.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.99-101
• /
• 2008

본 논문에서는 자기부상방식의 이송장치의 부상 및 안내력을 발생시키는 주 전자석의 자기력 특성해석에 관해 연구하였다. 부상용 전자석의 자기력 특성을 해석하기 위해서 이론적 해석 방법에 의한 등가 자기 부상 모델을 제시하였으며, 제어 변수에 따른 특성을 고찰하기 위해서는 시뮬레이션값과 유한요소법예 의한 계산값과 비교, 분석하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.267-267
• /
• 2003

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2004.05a
• /
• pp.138-146
• /
• 2004

현재 반도체 및 LCD 제조분야에 적용되는 공정장비, 이송시스템에는 고성능, 고생산성이 요구되고 있는 추세이다 기존의 선형이송시스템은 구동원으로 서보모터(Servo Motor)를 사용하고 있으며, 기계적 동력전달장치를 사용하여 직선운동을 하는 구조로 되어있어 마찰소음, Position Error 등의 발생요인이 많은 단점을 가지고 있다. 반면에 선형전동기(Linear Motor)를 이송시스템의 구동원으로 사용하면 기계적 동력전달장치가 생략되어 기존의 선형이송시스템이 가지고 있는 단점들의 개선효과가 크며 유지보수면에서도 유리한 점이 많다. 본 연구에서는 2,500[N]급 영구자석 여자 횡자속 선형전동기를 설계, 개발하였으며, 이를 적용한 추진모듈을 개발하였다. 본 연구에서 개발된 횡자속 선형전동기 적용 추진모듈은 LCD 제조분야의 Stocker, RGV, Index, OHS, OHT 등을 비롯하여 타 산업분야의 선형이송시스템으로의 가능하다.