• 제목/요약/키워드: 이송계 설계

검색결과 43건 처리시간 0.027초

고속 축 이송을 이용한 타원 절삭가공 기술

  • 김성식
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 춘계학술대회 논문요약집
    • /
    • pp.41.2-41
    • /
    • 2004
  • 본 발표에서는, 3차원 형상의 피스톤을 모방절삭이 아닌 CNC절삭을 행하기 위해 고속 이송계의 개발 사례를 다루었다. 여기서 다양한 고속 이송계의 구축형태와 적용 가능한 핵심요소 부품들을 비교하여 고속 이송 시스템으로서의 장단점을 검토하였다. 또한 타원형상의 가공물을 고속으로 처리하기 위한 소프트웨어와 제어보드에 대해 자세히 설명하였다. 비대칭 원형 절삭가공을 위한 장치개발이 공작기계 설계의 축소판이다.

  • PDF

리니어 모터의 열변형 억제를 통한 초정밀 이송기술

  • 은인웅
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 춘계학술대회 논문요약집
    • /
    • pp.41.1-41
    • /
    • 2004
  • 본 발표에서는, 최근 고속 고정밀 이송계로 각광을 받고 있는 리니어 모터의 열특성 분석과 구동부 설계변경을 통한 첨단 이송계의 열변형 억제 및 최소화 기술에 대해 다루고 있다. 리니어 모터의 공작기계에 적용 시, 리니어 모터의 발열원과 열전달 경로 등을 분석하고 이에 대응한 냉각기법과 단열재의 배치에 따른 고성능 이송계의 열특성 개선 사례를 소개한다. 새로운 리니어 모터의 공작기계에 적용은 선택사항에서 필수사항으로 이동한다.

  • PDF

디스크 드라이브 이송계의 해석 및 설계에 관한 연구 (A Study on the Analysis and Design for Disc Drive Feeding System)

  • 김선모;엄재용;최한국;강희종;임홍균
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 추계학술대회논문집 II
    • /
    • pp.977-982
    • /
    • 2001
  • In this paper, we deal with the analysis and optimum design of a disc drive feeding system. Using this proposed design method, we can determine an optimal step motor and lead-screw for the shorter seek time and required seek resolution. Simulation results show that this method can be potentially implemented in the design of a feeding system.

  • PDF

CNC공작기계 이송오차의 발생요인에 관한 실험적 연구

  • 고해주;정윤교
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1991년도 춘계학술대회 논문집
    • /
    • pp.59-67
    • /
    • 1991
  • 공작기계의 정밀도는 가공물의 최종 치수 정밀도와 직접적으로 연계되는 공작기계의 전체적 성능 평가를 위한 주요인자 중의 하나이다. 공작기계 위치 결정 정밀도에가장 큰 영항을 주는 인자로서는 이송계의강성, Back lash, 안내면의 습동저항 그리고 이송 계의 자세변화등이 해당된다. 본 연구에서는 이송나사로구동되는 CNC 원통 연삭기의 숫돌대(Wheel Head)축 이송 구동계의 오차발생 요인에 대해 실험적인 검토를 수행하였다. 이를 위하여 이송 구동계의 정강성에따른 영향과 이송 안내면의 각운동에 의한 위치정밀도 영향 및 위치 검출 장치의 종류에 따른 위치오차의 재현성(Repeatatility)의 유무를 레이 저 간섭계를 이용한 정밀 측정을 통하여 비교 검토함에 의해 이송 오차를 최소화 시킬 수 있는 CNC 공작기계이송 구동축 설계의 기본 방향을 마련하는데 역점을 두고 연구를 수행하게 되었다.

공작기계설계 지원 시스템 개발 -이송계 서보모터 선정에의 적용 (Development of the Expert system of Selecting a Servo-Motor in Feed Drive Unit of a Machiing Center)

  • 장민제;이수홍;박면웅
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2000년도 추계학술대회 논문집
    • /
    • pp.199-202
    • /
    • 2000
  • In this paper, we developed an expert system that helped a machine-tool designer to select a moderate servomotor of the feed drive unit of a machine tool. With the specification of the drive unit, it searches for the set of servo-motors that have enough torque and power to satisfy the driving condition which the designer defines from the database. me database also contains knowledge and rules, which describe the design process and calculate design parameters of a feed drive. The knowledge-based design support module shows every steps of inference and reason for the solution that it provides.

  • PDF

수직 이송계의 최적 설계에 관한 연구 (A Study on Optimal Design of Perpendicular Guideway Mechanism)

  • 이석우;최헌종;황보승;김대중
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2000년도 춘계학술대회 논문집
    • /
    • pp.982-986
    • /
    • 2000
  • Perpendicular guideway mechanism has a different behavior with horizontal guideway mechanism due to the slider weight. So, to decrease its weight effect, counter balances such as weight type and hydraulic cylinder type are used. But it can also make another motion behavior by weight rate of slider and counter balance, its connected position. Therefore, it is necessary to find design parameters and analyze their effect. This paper dealt with the optimal design of perpendicular guideway mechanism. For analysis, the theoretic model as same as real machine tool and sib plate to adjust the clearance was used. Rotational angle and displacement of slider, pressure distribution, friction distribution were calculated. Stick slip, intermittent motion of slider according to friction change was adapted to the perpendicular guideway mechanism.

  • PDF

마이크로렌즈 연삭용 고속 고정밀도 공기주축의 설계 및 해석에 대한 연구 (A Study on the Design and Analysis of High Speed & Accuracy Air Spindle for Micro-Lens Grinding)

  • 편영식;이건범;박정현;요꼬이유시유끼
    • 한국정밀공학회지
    • /
    • 제20권7호
    • /
    • pp.13-19
    • /
    • 2003
  • 산업의 발달과 더불어 초소형, 고정밀 제품에 대한 수요가 증가함에 따라 이를 가공할 수 있는 마이크로 가공기술 및 초정밀 공작기계를 구현할 수 있는 설계기술이 국가 경쟁력을 결정하는 핵심 기술로 인식되기에 이르렀다. 공작기계의 성능은 주축계 설계 및 제작기술, 이송계 설계 및 제작기술, 오차 보상기술, 베드 구조물 설계 및 방진기술, 시스템 종합기술 등에 의해 결정되며, 이중에서도 주축계의 설계 및 제작 기술은 가공정밀도 및 생산기술을 주도하는 핵심기술이라 할 수 있다.(중략)

고속 이송계의 통합설계 (Integrated Design of High-speed Feed Drive Systems)

  • 김민석;정성종
    • 대한기계학회논문집A
    • /
    • 제27권12호
    • /
    • pp.2028-2038
    • /
    • 2003
  • High-speed feed drive systems have been widely used in the manufacturing and semiconductor industries. Specifications for high-speed systems require more advanced capabilities than conventional feed drive systems. It is necessary to devise special design concepts to achieve the level of performance for high-speed feed drive systems. In this paper, an integrated design method is proposed for high-speed feed drive systems in which the interactions between mechanical and electrical subsystems ought to be considered simultaneously during the design process. Based on the integrated design method, a nonlinear optimal design procedure of mechanical subsystems considering the Abbe and radius errors is accomplished through the design process of electrical subsystems satisfying the control stability and the saturation condition of actuators as well as the relative stability. Both mechanical and electrical parameters are considered as design variables. Simulations and numerical case studies show that the integrated design method of high-speed feed drive systems creates results satisfying the desired performances of mechatronic systems.

탱카선의 실형분석에 따른 돌핀부두의 설계조건에 관한 연구

  • 강석진;이중우;이형하
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2012년도 추계학술대회
    • /
    • pp.41-43
    • /
    • 2012
  • 유가의 상승에 따른 에너지확보는 매년 국가의 중요한 정책의 하나로 되었으며, 전세계적으로 다양한 탱카선이 건조되어왔고 이들 선박의 운항에 따라 국내에서도 탱가선을 서비스 하기위한 계류, 저장, 이송 시설 등 항만인프라의 구축이 원활하게 이루어지고 있다. 그러나, 이들 시설 중 돌핀부두에의 접이안을 위한 시설의 국내 설계기준은 오래전에 설정된 것으로 보완이 필요한 것으로 나타났다. 본 연구에서는 현재 건조되어 운항되고 있는 전세계의 탱카선의 자료를 수집하고 톤수에 따른 선형을 분석하여 돌핀부두내 작업돌핀, 접안돌핀, 계류돌핀의 적정간격과 계류안정성의 평가에 반영하고, 설계기준의 보완에 대한 의견을 제시하고자 하였다. 분석에는 전세계 250여척의 탱카선의 선형을 조사하였고, 미국, 영국, 캐나다 등 외국의 설계기준과 국내기준의 비교가 이루어졌다.

  • PDF