• Title/Summary/Keyword: 이상 혼합

Search Result 4,013, Processing Time 0.032 seconds

A Study on Coolant Mixing in Multirod Bundle Subchannels

  • Cha, Jong-Hee;Cho, Moon-Haeng
    • Nuclear Engineering and Technology
    • /
    • v.2 no.1
    • /
    • pp.19-25
    • /
    • 1970
  • A study was conducted on the coolant mixing between water flowing in two adjacent subchannels. Measurements were made of the quantity of mass transferred between a larger rectangular channel and a smaller triangular channel in a 19-rod fuel bundle under the conditions of single phase flow and air-water two-phase flow. The results of the experiments showed that the low mixing rate appears in single phase flow, and high mixing rate was measured in air-water two-phase flow Mixing rate decreases with the increasing of air void fraction during the air-water flow. It seems that the high mixing rate in the air-water flow was caused due to adequate agitation of the chaotic air void.

  • PDF

Comparison of Three Parameter Estimation Methods for Mixture Distributions (혼합분포모형의 매개변수 추정방법 비교)

  • Shin, Ju-Young;Kim, Sooyoung;Kim, Taereem;Heo, Jun-Haeng
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.45-45
    • /
    • 2017
  • 상이한 자연현상으로 발생된 자료들은 때때로 통계적으로 다른 특성을 가지는 경우가 있다. 이런 자료들은 다른 두 개 이상의 모집단에서 자료가 발생한 것으로 가정할 수 가 있다. 기존에 널리 사용되어온 분포형 모형의 경우 단일한 모집단으로부터 자료가 발생한다는 가정하에서 개발된 모형들로 위에서 언급한 자료들을 적절히 모의할 수 없다. 이런 상이한 모집단에서 발생된 자료를 모형화 하기 위해서 혼합분포모형(mixture distribution)이 개발되었다. 홍수나 가뭄 등과 같은 극치 사상의 경우 다양한 자연현상들로부터 발생하기에 혼합분포모형을 적용할 경우 보다 정확한 모의가 가능하다. 혼합분포모형은 두 개 이상의 비혼합분포모형들을 가중합하여 만들어진다. 혼합 분포모형의 형태로 인하여 기존의 분포형 모형의 매개변수 추정 모형으로 널리 사용되던 최우도법 (maximum likelihood method), 모멘트법(method of moment), 확률가중모멘트법 (probability weighted moment method) 등을 이용하여 혼합분포모형의 매개변수를 추정하는 것이 용이 하지 않다. 혼합분포모형의 매개변수 추정 방법으로는 Expectation-Maximization (EM) 알고리즘, Meta-Heuristic Maximum Likelihood (MHML) 방법, Markov Chain Monte Carlo (MCMC) 방법 등이 적용되고 있다. 현재까지 수자원 분야에서 사용되는 극치 자료를 혼합분포모형을 이용하여 모의할 때 매개변수 추정방법에 따른 특성에 대한 연구가 진행되지 않았다. 본 연구에서는 우리나라 연최대강우량 자료를 이용하여 혼합분포모형의 매개변수 추정방법 (EM 알고리즘, MHML 방법, MCMC 방법) 들의 특성들을 비교 분석하였다. 혼합분포모형으로는 Gumbel-Gumbel 혼합분포 모형을 적용하였다. 본 연구의 결과는 향후 혼합분포모형을 이용한 연구에 좋은 기초자료로 사용될 수 있을 것으로 판단된다.

  • PDF

Effect of Fenelorim on Reducing Herbicide Injury of Rice Plaints in Vinyl-covered Subirrigated Seedbed (보온절충(保溫折衷)못자리에서 해독제(解毒劑) Fenclorim이 벼에 대한 제초제(除草劑)의 약해경감(藥害輕減)에 미치는 영향(影響))

  • Lee, H.Y.;Pyon, J.Y.
    • Korean Journal of Weed Science
    • /
    • v.8 no.3
    • /
    • pp.237-243
    • /
    • 1988
  • Field study was conducted to evaluate safening effect of fenclorim (4,6-dichloro-2-phenyl pyrimidine) against benthiocarb, butachlor, and pretilachlor injury in rice plants under vinyl-covered subirrigated seedbed. Combinated application of benthiocarb 210, and 315 g ai/10a with fenclorim 10 g ai/10a or higher concentration, butachlor 180, and 270 g ai/10a with fenclorim 20 g ai/10a or higher concentration, and pretilachlor 60, and 90 g ai/10a with fenclorim 30 g ai/10a reduced herbicide injury of rice, and thus increased standing, plant height, tillers, and dry weight of rice plants compared to no combined application of fenclorim.

  • PDF

An Experimental Study on Spontaneous Combustion Risk of M.E.K (M.E.K(경화제)의 자연발화 위험성에 관한 실험적 연구)

  • Kim, Jung-Hyun;Yoo, Yong-Ho;Kweon, Oh-Sang;Yoo, Myong-Youl
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2011.11a
    • /
    • pp.470-473
    • /
    • 2011
  • 본 연구에서는 산업현장에서 에폭시 강화촉진제, 도로용 첨가제 등으로 많이 사용되고 있는 경화제(M.E.K)의 혼합비에 따른 자연발화 위험성을 알아보고 산업 현장의 화재 예방을 위한 기초자료로 제공하고자 하였다. M.E.K와 에포비아 수지를 각기 다른 비율로 혼합한 상태에서 시간경과에 따른 시료의 온도변화 와 유증기 발생 및 자연발화 여부를 관찰한 결과 합성수지와 경화제의 혼합시 경화제가 5% 이상으로 혼합될 경우 혼합 수지의 내부온도가 약 $40^{\circ}C$ 이상으로 상승하면서 발포 현상과 함께 다량의 유증기가 발생하였고, 유증기가 발생된 모든 조건에 대하여 자연발화 여부는 확인할 수 없었다.

  • PDF

A Study on the Properties of Ethylene-Vinyl Acetate Emulsion Blended with SBR, Urethane and Epoxy Latex (에폭시, 우레탄 및 SBR계 라텍스를 혼합한 에틸렌-비닐아세테이트 에멀젼의 특성에 관한 연구)

  • Choi, Sang-Goo
    • Elastomers and Composites
    • /
    • v.34 no.5
    • /
    • pp.414-422
    • /
    • 1999
  • SBR, polyurethane and epoxy latex were separately blended with ethylene-vinyl acetate(EVA) emulsion In $0{\sim}50%$. EVA emulsion was not reacted with latexes in liquid phase and mixtures had good stroage stability. The viscosity of cement mixtures was elevated to 20,000cps in $0.5{\sim}2.0$ hours by mixing. The mixtures mixed with pigment represented high viscosity and showed higher viscosity as time goes by. Mixtures had higher hardness with mixing SBR than mixing epoxy or urethane. The hardness was suddenly increased over cement content 30%. showed pencil hardness $H{\sim}2H$ in $50{\sim}60%$. The increase of hardness in high solids was depended upon not only the condensation of latexs but also the coagulation and adhesion of cement particle.

  • PDF

A Study on the Application of Paper Fly Ash as Stabilization/Hardening Agent (지반개량재로서 제지회의 활용에 관한 연구)

  • Lee, Yong-An;Lee, Hong-Ju;Kim, You-Seong
    • Journal of the Korean GEO-environmental Society
    • /
    • v.3 no.2
    • /
    • pp.23-33
    • /
    • 2002
  • Examined a practical use possibility of paper fly ash that is industrial by-product as a stabilization/hardening agent. Performed unconfined compression test, scanning electron microscopy and pH analysis etc. for 100% paper fly ash-soil mixtures and each paper fly ash-soil mixtures that add cement as the second addition and sulfate component of small quantity for strength promotion and so on. In all cases, strength of admixtures increased according as curing time and mixing ratio increases but almost strength is revealed at mixing early and expressed maximum strength increase efficiency at mixing ratio 9% with raw soil. Compare with the case that use paper fly ash only, in case of cement amount 10~30% was included in paper fly ash, strength of admixtures increases two times and 40% was included, that increases from five to eight times.

  • PDF

고전압 펄스 시스템 '천둥'을 이용한 N2, SF6 및 혼합기체에서의 전기 방전 현상 연구

  • Byeon, Yong-Seong;Song, Gi-Baek;Hong, Yeong-Jun;Han, Yong-Gyu;Eom, Hwan-Seop;Choe, Eun-Ha
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.08a
    • /
    • pp.102-102
    • /
    • 2010
  • 수 Tera Watt급의 가속기 및 펄스파워 시스템은 다수의 스위치를 사용하고 있으며, 이와 같은 가속기 및 시스템의 성능은 기체방전 스위치의 성능에 직접적으로 관련되어 있다. 일반적으로 이와 같은 기체방전, 액체방전 고출력 스위치는 다목적으로 많은 연구와 개발에 응용되고 있다. 예를 들어 천둥 펄스전자빔 발생장치는 12개의 Marx gap 및 3개의 100 kV 펄스충전 전기트리거 gap을 가지고 있다. 기체 방전 또는 액체 방전 펄스 충전 갭 스위치의 음극에 펄스 고전압이 인가되면 이로 인하여 음극에서 전자빔이 발생한다. 내부에는 전자빔이 양극과 충돌하는 순간 양극표면에 플라스마가 형성된다. 이와 같은 플라스마 sheath는 축 방향 이극관 안에서 양극충전 에서 음극으로 팽창하면서 전파하며, 또한 거의 동시에 음극표면에도 플라스마가 형성되어 음극에서 양극으로도 팽창하여 전파하게 된다. 이와 같은 펄스충전 고출력 갭 스위치 안에서 발생되는 방전 플라스마의 특성에 관한 갭 breakdown 과정에 대한 특성연구를 한다. 고출력스위치의 특성 조건으로는 방전전압, 방전시간, jitter 등이 있다. 본 연구에서는 최대전압 600 KV, 최대전류 88 KA, 펄스 폭 60 ns의 특성을 가지는 고전압펄스 시스템 '천둥'을 이용하여 방전 챔버에 고전압 펄스를 인가하고 N2와 SF6 혼합기체 종류와 압력에 따른 방전 현상을 연구하였다. 전극은 구리텅스텐 합금재질의 표준전극을 사용하였고, 전극 간격은 20 mm로 고정하였다. 방전 챔버 압력을 100 torr에서 4 기압까지 변화시켜가며 실험을 진행하였고, N2에 대한 SF6의 혼합비율을 0%~100%까지 변화시키며 실험을 진행하였다. 방전 챔버에는 C-dot probe와 B-dot probe를 설치하여 전압과 전류를 측정하였고, C-dot probe 와 B-dot probe는 각각 Northstar사의 10000:1 고전압 probe와 rogowiski coil을 이용하여 시준 하였다. 실험결과 방전전압은 압력이 증가함에 따라 증가하다가 2 기압 이상에서는 완만히 증가하는 경향을 보였고, SF6 혼합비율은 0~10%까지 급격히 증가하고, 그 이상의 혼합비율에서는 완만히 증가하였다. 방전개시시간은 혼합기체 압력에 따라 증가하며 1기압 이상에서는 급격히 증가 하였다. SF6 혼합비율에 따라서는 1 기압 조건까지는 큰 차이가 없었으나 2 기압부터는 급격히 증가하였다. 안정성을 나타내는 jitter는 SF6 100%일 때 가장 컸으나 혼합기체의 변화에 따른 큰 차이는 없었다.

  • PDF

Mechanical Characteristics of Light-weighted Soils Using Dredged Soils (준설토를 활용한 경량혼합토의 역학적 특성 연구)

  • 윤길림;김병탁
    • Journal of the Korean Geotechnical Society
    • /
    • v.18 no.4
    • /
    • pp.75-83
    • /
    • 2002
  • This paper is to investigate the mechanical characteristics of light-weighted soils (LWS) consisting of expanded polystyrene(EPS), dredged clays and cement by using both uniaxial and triaxial compression tests. The mechanical characteristics of the compressive strength of LWS are analysed with varying initial water contents of dredged clays, EPS ratio, cement ratio, and curing stress. In the triaxial compression state, it is found that the compressive strength of LWS containing EPS is independent on the effective confined stress. As the EPS ratio decreases($A_E$<2%) and cement ratio increases($A_c$>2%), the behavior characteristics of triaxial compressive strength-strain relationship is similar to that of cemented soil which decreases rapidly in compressive strength after ultimate compressive strength. For the applications of LWS to ground improvements which require the compressive strength of up to 200kPa, the optimized EPS ratio and initial water content of dredged clay are estimated to be 3~4% and 165~175%, respectively. Also, the ultimate compressive strength under both triaxial test and uniaxial compression states are almost constant for a cement ratio of up to 2% and then critical cement ratio of this LWS shall be 2%.

A Study of Outlier Detection Using the Mixture of Extreme Distributions Based on Deep-Sea Fishery Data (원양어선 조업 데이터의 혼합 극단분포를 이용한 이상점 탐색 연구)

  • Lee, Jung Jin;Kim, Jae Kyoung
    • The Korean Journal of Applied Statistics
    • /
    • v.28 no.5
    • /
    • pp.847-858
    • /
    • 2015
  • Deep-sea fishery in the Antarctic Ocean has been actively progressed by the developed countries including Korea. In order to prevent the environmental destruction of the Antarctic Ocean, related countries have established the Commission for the Conservation of Antarctic Marine Living Resources (CCAMLR) and have monitored any illegal unreported or unregulated fishing. Fishing of tooth fish, an expensive fish, in the Antarctic Ocean has increased recently and high catches per unit effort (CPUE) of fishing boats, which is suspicious for an illegal activity, have been frequently reported. The data of CPUEs in a fishing area of the Antarctic Ocean often show an extreme Distribution or a mixture of two extreme distributions. This paper proposes an algorithm to detect an outlier of CPUEs by using the mixture of two extreme distributions. The parameters of the mixture distribution are estimated by the EM algorithm. Log likelihood value and posterior probabilities are used to detect an outlier. Experiments show that the proposed algorithm to detect outlier of the data can be adopted instead of simple criteria such as a CPUE is greater than 1.

Oxidative Stability of Deep-Fried Instant Noodle Prepared with Ricebran Oil Fortified by Adding Antioxidants or by Blending with Palm Oil (항산화제 또는 팜유로 보강된 미강유를 이용한 라면의 산화안정성)

  • Kang, Dong-Ho;Park, Hye-Kyung;Kim, Dong-Hoon
    • Korean Journal of Food Science and Technology
    • /
    • v.21 no.3
    • /
    • pp.409-418
    • /
    • 1989
  • The oxidative stability of the ramyon prepared with ricebran oil fortified with ${\alpha}-tocopherol$, BHA, TBHQ, and ascorbyl palmitate+citric acid or blended with palm oil was studied to assess the suitability of the oil as the frying oil. The antioxidants were added to a ricebran oil at 0.02% level, respectively, while blended oils were prepared by adding a palm oil to the ricebran oil at ratios of 3:7, 5:5, and 7:3. Ramyon samples were prepared by frying steamed noodel with the oils. They were stored in dark at $35.0{\pm}0^{\circ}C$. for 90 days. Peroxide, acid, iodine values, dielectric constant, and fatty acid composition of the oils extracted from the samples were determined regularly. The oxidative stability of the extracted oils and storage stability of the samples were estimated from the results of the determinations. ${\alpha}-tocopherol$ did not exert any appreciable antioxidant effect on the extracted oil while BHA demonstrated some effect. Ascorbyl palmitate with citric acid and especially TBHQ exerted a considerable effect. The storage stability of the samples fried with the oil fortified with TBHQ was as good as that of the samples prepared with the palm oil. The stability of the samples improved as the palm oil content In the frying oil increased. The stability of the samples fried with the blended oil containing 70f) palm oil was comparable to that of the samples prepared with the pure palm oil

  • PDF