• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.9-15
• /
• 2013

Recent works on ad hoc network study have shown that achievable throughput can be made to scale linearly with the number of receive antennas even if the transmitter has only a single antenna. In this paper, we propose a non-parametric linear minimum mean square error (MMSE) receiver for achieving further gain in performance when the channel state information at receiver (CSIR) of interferers is imperfect. The key feature to make our approach effective is to exploit the autocorrelation of the received signal. In fact, by incorporating the desired channel information on top of the observations including interference and noise only, the proposed method achieves large fraction of the optimal MMSE transmission capacity without transmission rate loss. From the SINR analysis as well as transmission capacity simulations in realistic ad hoc network system, we show that the proposed non-parametric linear MMSE receiver brings substantial performance gain over existing multiple receive antenna algorithms.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.1
• /
• pp.76-87
• /
• 2000

Multicarrier DS-CDAM is an effective approach to realize wideband CDMA system in a multipath fading channeal. In this paper, we propose a cinvolutionally-coded overlapped multicarrier DS-CDMA system, and show the performance improvement by comparing with conventional multicarrier DS-CDMA system. We consider the case of 50% overlapping with the adjacent subband to utilize the transmission bandwidth more efficiently. In the proposed multicarrier system, each of the rate 1/M convolutionally-encoded symbols is also 1/R repetition coded and transmitted using overlapped multicarriers and we may obtain the coding gain and frequency diversity effect, simultaneously. We also analyze the possibility of reduction in total MUI by considering a raised-cosine wave-shaping filter having a roll-off factor (0< ${\beta}{\le}1$). It will be shown that the proposed system outperforms the multicarrier DS-CDMA system in $^{[3]}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1196-1202
• /
• 2007

In this paper, the effects of performance improvement far the OFDM based satellite communications are analyzed with applying the CI(Carrier Interferometry)-OFDM and channel coding scheme considering the group delay and gain ripple characteristic as well as the nonlinear characteristic of the transponder. Comparing the BER between traditional OFDM and CI-OFDM, the degree of performance improvement is presented in AWGN channel environments for specified backoff condition of HPA. The simulations are performed with the 36 MHz bandwidth of transponder channel, 120 Mbps transmission rate, and 16 QAM modulation scheme between ideal and worst case condition. It is shown that the improvement measure by the CI-OFDM and channel coding for the group delay and nonlinear characteristic outperforms that for the gain ripple in terms of performance degradation presented by the individual characteristics. And the simulation results show that the effects of improvement by the CI-OFDM outperforms the effect by the applied channel coding, particularly in worst case condition.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.3-9
• /
• 2015

Under the maximum transmit power constraint and the minimum rate constraint, we propose the optimal number of transmit antennas and transmit power which maximize energy-efficiency (EE) in multi-user multiple-input multiple-output (MIMO) downlink system with the maximal ratio transmission (MRT) precoding. Because the optimization problem for the instantaneous channel is difficult to solve, we use independence of individual channel, average channel gain and path loss to approximate the objective function. Since the approximated EE optimization problem is two-dimensional search problem, we find the optimal number of transmit antennas and transmit power using Lagrange multipliers and our proposed algorithm. Simulation results show that the number of transmit antennas and power obtained by proposed algorithm are almost identical to the value by the exhaustive search.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.2 s.314
• /
• pp.18-23
• /
• 2007

Intra-body communication' is a wireless communication technology that uses a body as a transmission medium for electrical signals. Generally, an 'earth ground' is used to create an electric field for operating the system; however this operating method could not apply to telemetry for implanted neural prosthetic devices. So this paper suggests a newly designed intra-body communication for neural prosthetic devices. A floating system which has a couple of electrodes with body was studied to remove an influence of the 'earth ground'. We found that 10MHz is the most suitable carrier frequency in skin experiments and over 3MHz in subcutaneous experiments. The system has been applied to a current stimulator circuit for cochlear implant that uses pulse width modulation (PWM) method at 480kbps rate successfully.

• Journal of Advanced Navigation Technology
• /
• v.16 no.5
• /
• pp.810-816
• /
• 2012

In this paper, BER(Bit Error Ratio) performances of the TransferJet system, which is the standard of a close proximity inductive wireless communication system, are presented and analyzed. Comparing to other wireless communication systems, the TransferJet system has some advantages such as short communication range(i.e., high security in the wireless communication environments), fewer effects of multipath distortion, and higher transmission rate. In order to demodulate the received signal, either SC(Soft-decision Combining) or HC(Hard-decision Combining) can apply to the despreader and demodulator of the receiver. When the spreading factor is more than 4, the SC scheme approximately has a minimum signal-to-noise ratio gain of 2 dB over the HC scheme. Moreover, from simulation results, we can conclude that the quantization bits of 3 bits are an optimum value for the SC scheme in the TransferJet system since the 3-bit quantization achieves nearly the performance as that attained by double-precision floating-point.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9C
• /
• pp.564-572
• /
• 2011

Distributed video coding (DVC) system has been proposed to reduce encoder complexity by using the correlation of frames in decoders. Since the block based motion estimation operation is not performed in the encoder of DVC system, lapped transforms, in which adjacent two blocks are transformed into one block, can be efficiently used in the DVC system. In this paper, an efficient DVC system using lapped transforms is proposed. The overlapped block motion compensated interpolation is used to produce side information, and the corresponding correlation noise between original Wyner-Ziv frame and side information is modeled. Extensive computer simulations show that the proposed DVC system outperforms conventional DVC systems.

• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.347-354
• /
• 2015

Hypofractionated radiotherapy prescribes high dose once. Due to this there's a bad point that patients are exposed much dose in normal organ. But recently the study making up for a limit is continuing. Cause of preference of this kind of development of therapy technic and high-energy photon beam, patients can be exposed to additional radiation. Because photoneutron is created by photonuclear reaction. So, in this study I measured photoneutron and analyzed by DVH amounts of radiation from the treatment plan that was used to acute, metastatic pelvis cancer patients who was treated by hypofractionated radiotherapy applied IMRT. As a result, incidence of photoneutron based on the hypofractionated radiotherapy was not a big difference in proportion to the dose fractionation. Protective effects of normal organ by hypofractionated radiotherapy applying IMRT is relatively high compared to 3D CRT but also photoneutron was in created. So a proper treatment plan and a best therapy should be considerated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.664-674
• /
• 1996

In high speed multi-wavelength networks, retransmission overhead due to desination conflict or control packet collision is one factor of performance degration because signal prpagation delay is much larger than the transmission time of data packet. In this paper, an efficient WDMA protocol with a collision avoidance mechanism is proposed for high speed WDM single-hop network with a passive star topology. In proposed protocol, each node has cource queues and routing table to store souting informatio. This architecture makes is possible to avoid any kind of collision when a node reserves the channel to transmit a data packet. High system thoughput and channel utilization can be achieved by proposed protocol since there are no discarded packets caused by any collision at transmission time. The performance of proposed protocol is evaluated in term of throughput and delay with variations in offered load. Simulation results show that the proposed protocol has superior performance to convertional protocols under nonuniform traffic as well as uniform traffic.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.18-26
• /
• 2009

When channel state information (CSI) is available at the transmitter, the system throughput can be enhanced by adaptive transmissions and opportunistic multiuser scheduling. In this paper, we consider multiple-input multiple-output (MIMO) systems employing bit-interleaved coded orthogonal frequency division multiplexing (BIC-OFDM). We first propose a bit-loading algorithm based on the Levin-Campello algorithm for the BIC-OFDM. Then we will apply this algorithm to the MIMO system with a finite set of constellations, by reassigning residual power on each stream Simulation results show that proposed bit-loading scheme which takes the residual power into account improves the system performance especially at high signal-to-noise ratio (SNR) range.