• Journal of Soil and Groundwater Environment
• /
• v.7 no.4
• /
• pp.59-67
• /
• 2002

As a parameter for hydrodynamic modeling to define the range of seawater intrusion, dispersivities are frequently determined from pre-experiments or theoretical studies because field experiments need a lot of time and expenses. If the dispersivities are inadequate for an aquifer, the numerical results may have some errors. We examined the validity of longitudinal dispersivities by comparing the ranges of seawater intrusion with numerical modeling, field data and apparent resistivity sections. In the numerical modeling the TDS distributions simulated by the Xu's longitudinal dispersivity are more similar to the values of TDS measured at monitoring wet]s and boreholes than those by the Neuman's longitudinal dispersivity. The ranges of seawater intrusion by numerical simulations using Xu's longitudinal dispersivity show that the contour line of 1000 ㎎/L. as TDS is located at 480 m from the coast in May, while at 390 m in July. The difference is originated from the shift of the interface between seawater and fresh water. It moved toward the coast in July because of the seasonal increase of hydraulic gradient according to rainfall. A contour line of 15 ohm-m was used to define the range of seawater intrusion in apparent resistivity sections. From this criterion on the interface between seawater and fresh water, the range of seawater intrusion is located at 450 m from the coast. This result is similar to the range of seawater intrusion simulated by the numerical modeling using Xu's dispersivity. Therefore the range of seawater intrusion shows the difference due to the dispersivities used for the hydrodynamic modeling and the dispersivity generated by the Xu's equation is considered more effective to decide the range of seawater intrusion in this study area.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.4
• /
• pp.1-9
• /
• 2020

This study analyzes contaminant movement under transient flow in a rubble mound revetment offshore waste landfill barrier system that prevents contaminant runoff. The barrier system consists of bottom layer and side barrier. For the bottom layer system, impermeable clay layer is used. For the side barrier system, the HDPE barrier sheet (primary element) plays the main role, and the intermediate protection layer (supplementary element) is responsible for the barrier. Seepage, advection, dispersion numerical analysis was carried out using SEEP / W and CTRAN / W programs. As a result, under abnormal conditions considering the fluctuation in tidal range, the volume and direction of the flow velocity vector of the pore water change with time and the dispersion concentration of the contaminant changes. When comparing the case of 2 m tidal range and 8 m tidal range, the larger the tide value, the higher the concentration of contaminant under abnormal conditions. It was found that the rate of change of the concentration of the contaminant changed depending on the change in the tidal range, and as a result, the outflow of the pollutant was smaller than that in the steady flow state.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.668-676
• /
• 2010

Optimal net residual dispersions (NRDs) of inline dispersion management (DM) for compensating the signal distortion of $24{\times}40$ Gbps WDM channels in optical transmission links, in which optical phase conjugator (OPC) is placed from 250 km to 750 km by spacing 50 km in 1,000 km total transmission length of single mode fiber (SMF), are induced as a function of various ope positions. And, performance improvement of WDM channels in transmission links with the induced optimal NRD is investigated by comparing with that in transmission links with NRD = 0 ps/nm. It is confirmed that optimal NRDs are decided by displacement of OPC from mid-way of total transmission length, i.e. 500 km, and the determinating and applying of optimal NRD in case of ope displacement into transmitters is more stable and effective than that in case of ope displacement into receivers from 500 km. Also, it is shown that eye opening penalties (EOPs) of WDM channels in transmission links with optimal NRD are improved by 1.5 dB to 3 dB, which are related with OPC position, from that obtained in transmission links with fixed NRD of 0 ps/nm.

• The KIPS Transactions:PartA
• /
• v.15A no.2
• /
• pp.111-118
• /
• 2008

With the advance in mobile communication systems, the need for distributed applications running on multiple mobile devices also grows gradually. As such applications are subject to H/W failures of the mobile device or communication disruptions, compared to the traditional applications in fixed networks, it is crucial to develop any recovery mechanism suitable for them. For this, checkpointing is widely used to restart interrupted applications. In this paper, we devise an efficient checkpointing method that adopts the software agent executed at the mobile support station. The agent, called the checkpointing agent, is aimed at supporting the concept of rollback-distance (R-distance) that bounds the maximum number of roll-backed local checkpoints. By means of the R-distance, our method can prevent undesirable domino effects and heavy checkpoint overhead, while providing high flexibility in checkpoint creation.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.562-570
• /
• 2011

In this paper, a distributed mobile relay power control (DMRPC) scheme for maximizing individual cell throughput is proposed for mobile relay aided multi-cell orthogonal frequency division multiplexing (OFDM)-time division duplex (TDD) system. In the system with DMRPC, the power levels of relay's are controlled by individual cell without cell cooperation and signalling overhead. It is demonstrated by numerical simulation that DMRPC provides the better cell throughput performance than either the full power relay aided system or conventional system without relay does. Moreover, it is also shown that relay aided systems with DMRPC, and the conventional system have almost identical cell edge throughput, while full power relay aided systems show worse performance in cell edge throughput.

• Journal of KIISE
• /
• v.44 no.2
• /
• pp.213-222
• /
• 2017

The Internet of Things (IoT) technology is rapidly developing in recent years, and is applicable to various fields. A smart factory is one wherein all the components are organically connected to each other via a WSN, using an intelligent operating system and the IoT. A smart factory technology is used for flexible process automation and custom manufacturing, and hence needs adaptive network management for frequent network fluctuations. Moreover, ensuring the timeliness of the data collected through sensor nodes is crucial. In order to ensure network timeliness, the power consumption for information exchange increases. In this paper, we propose an IEEE 802.15.4e DSME-based distributed scheduling algorithm for mobility support, and we evaluate various performance metrics. The proposed algorithm adaptively assigns communication slots by analyzing the network traffic of each node, and improves the network reliability and timeliness. The experimental results indicate that the throughput of the DSME MAC protocol is better than the IEEE 802.15.4e TSCH and the legacy slotted CSMA/CA in large networks with more than 30 nodes. Also, the proposed algorithm improves the throughput by 15%, higher than other MACs including the original DSME. Experimentally, we confirm that the algorithm reduces power consumption by improving the availability of communication slots. The proposed algorithm improves the power consumption by 40%, higher than other MACs.

• The KIPS Transactions:PartD
• /
• v.12D no.2 s.98
• /
• pp.289-302
• /
• 2005

The mobile agent has very various performance according to the element of communication number of times between hosts, quantity of transmission data agent's size, network state etc. specially, migration method is caused much effect in whole performance of distributed system. Most existing migration methods have simplicity structure that it moves doing to accumulate continuously result after achieving task by visiting host in the fixed order. Therefore, in case there are situation such as fault, obstacle, and service absence etc. This can be inefficient due to mobile agent increased network required time. In this paper, we design and implementation Multicast Migration Model for minimizing network required time by solving this problems. Multicast Migration Model includes components such as mobile agent including call module and naming agent, which provides object replication information and distributed server's location transparence. And we evaluate and compare with existing migration method applying prototype system to verify implemented migration model.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.283-288
• /
• 2011

This paper have proposed an object retrieval using the corners area variability based on correlogram. The proposed algorithm is processed as follows. First, the corner points of the object in an image are extracted and then the feature vectors are obtained. It are rearranged according to the number dimension and consist of sequence vectors. And the similarity based on the maximum of sequence vectors is measured. The proposed technique is invariant to the rotation or the transfer of the objects and more efficient in case that the objects present simple structure. In simulation that use Wang's database, the method presents that the recall property is improved by 0.03% and more than the standard corner patch histogram.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.909-912
• /
• 2008

무선 네트워크의 발달로 인해 이동 사용자가 급증함에 따라 무선 네트워크 환경에서도 질 높은 미디어 스트리밍 서비스를 받기 위한 수요가 증가하고 있다. 그러나 무선 네트워크는 유선 네트워크보다 상대적으로 좁은 네트워크 대역폭을 가진다. 또한 유선 네트워크 환경의 단말기에 비해 제한된 시스템 자원을 가지므로 유선 네트워크 환경의 사용자를 위한 고화질 미디어 데이터를 그대로 스트리밍 서비스 받기에 적합하지 않다. 최근 이러한 문제를 해결하기 위한 방법으로 미디어 트랜스코딩 서비스가 활발하게 연구되고 있다. 다수의 트랜스코딩 서버로 구성된 분산 트랜스코딩 시스템에서 특정 서버로 트랜스코딩 작업이 집중될 경우 사용자에게 질 높은 수준의 미디어 스트리밍 서비스를 제공하기 어렵다. 때문에 각 트랜스코딩 서버간의 균형적인 부하 분산이 중요한 문제가 되며, 처리되는 미디어 데이터의 특성을 부하 분산에 반영할 필요가 있다. 본 논문에서는 MPEG-2 미디어 데이터의 트랜스코딩 과정을 분석함으로써 비트율 변경에 따른 트랜스코딩 작업 시간 예측 기법을 제안한다. 제안된 기법은 트랜스코딩 서버 정보와 영화 정보, 목적 트랜스코딩 비트율을 이용하여 예상 트랜스코딩 시간을 예측한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.739-741
• /
• 2001

네트워크 기술의 보편화로 인하여 분산 네트워크 환경에서의 호스트들은 보안 사고의 위험에 항상 노출 되어 있다. 기존의 보안 기술들은 관리자가 보안을 필요로 하는 호스트에 대해 보안 취약점을 찾아서 이에 대해 조치를 취하는 것이 일반적인 방법이다. 이러한 방법들의 문제점은 새로운 보안 사고 유형에 대해 실시간으로 대처할 수 없을 뿐만 아니라, 관리자의 능력 범위 밖에 있는 호스트들은 항상 무방비 상태로 놓여 있는 문제점들이 있다. 본 논문에서는 이동 에이전트 시스템을 사용하여 각 호스트에 특정 보안 유형에 대해 진단 기능을 갖는 이동 에이전트를 파견하고 보안 취약점을 검사한 후 이를 관리자에게 보고 하는 자동화된 보안 취약점의 진단 및 모니터링 시스템에 대해 연구하였다.