• Journal of the Korean Orthopaedic Association
• /
• v.55 no.3
• /
• pp.271-275
• /
• 2020

Trauma is frequently implicated in the development of sarcomas, including rhabdomyosarcoma. Rare soft tissue sarcomas have been reported to arise in scar tissue following surgical procedures or thermal or acid burns, at fracture sites, and in the vicinity of plastic or metal implants, usually after a latent period of several years. The authors encountered a case of a rhabdomyosarcoma arising from the forearm crushed by a conveyor belt 11 years ago. Several possible etiological factors for sarcoma development were identified in this patient, including tissue damage and inflammation, as well as the presence of metal implants and the limb's exposure to radiation during multiple imaging tests. After severe soft tissue damage, the occurrence of a sarcoma should be considered and more attention should be paid to the causative factors for sarcoma.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.2
• /
• pp.171-176
• /
• 2016

By developing rider robot using omni wheel drive, a usability test for 6 people was conducted after finding out inconvenient factors and ways of improvement. The results of this research are as follows. First, we researched inconvenient factors captured by object of experiment using a rider robot who is living in the dormitory. It showed that the disabled showing 1.6 of satisfaction degree felt more inconvenient for normal people showing 4 of satisfaction degree. It was found that the height of seats is 10 centimeters higher, which caused inconvenience for moving. Second, each of the disabled and normal people showed 2.33 and 2.62 of satisfaction degree below the average for seats, back of a seat, armrest, footrest, security belts. However, for the revised design both of them showed 3.5 of satisfaction degree over the average. Third, most people felt this robot is quite expensive and said they would purchase it if subsidized by the government. Therefore, based on inconvenient factors and ways of improvement found in this research, further study needs to be conducted so as to improve the quality of life of the disabled.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.415-420
• /
• 2017

In this paper, an algorithm for object counting via a conveyor system using machine vision is suggested. Object counting systems using image processing have been applied in a variety of industries for such purposes as measuring floating populations and traffic volume, etc. The methods of object counting mainly used involve template matching and machine learning for detecting and tracking. However, operational time for these methods should be short for detecting objects on quickly moving conveyor belts. To provide this characteristic, this algorithm for image processing is a region-based method. In this experiment, we counted young abalone shells that are similar in shape, size and color. We applied a characteristic conveyor system that operated in one direction. It obtained information on objects in the region of interest by comparing a second frame that continuously changed according to the information obtained with reference to objects in the first region. Objects were counted if the information between the first and second images matched. This count was exact when young shells were evenly spaced without overlap and missed objects were calculated using size information when objects moved without extra space. The proposed algorithm can be applied for various object counting controls on conveyor systems.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2001.10a
• /
• pp.207-218
• /
• 2001

미국의 콘벨트와 같이 곡물을 집약적으로 재배하는 지역에서 관행생산으로부터 유기적 생산으로 전환할 때 문제가 되는 것은 어떻게 하면 작물윤작을 더 많은 이익이 나올 수 있도록 선택하고 관리하는가 하는 점이다. 곡물생산을 중단하고 사료와 녹비작물을 재배하는데 드는 기회비용은 상당하다. 많은 유기농업 연구자, 학자들은 가축사육을 농장에 도입하여 다양화와 노동력 활용도를 높일 필요가 있음을 강조하고 있다. 가축 역시 곡물생산량이 줄어드는 것을 보완해줄 정도로 곡물 및 사료작물의 가치를 늘려 추며, 곡물생산에 쓰여진 양분을 퇴비를 통해 재활용할 수 있게 해 준다. 곡물 집약재배 지역에서 유기농가는 양돈이 경종체계에 자연스럽게 들어맞는 것으로 생각해 볼 필요가 있다. 돼지는 곡물과 사료작물 모두에 가치를 증대시켜 줄 수 있는 아주 효율적이고 적용이 쉬운 가축이다. 그다지 많지는 않지만 유기적, 지속가능한 양돈 생산에 관해서는 문헌이 좀 있다. 그러나 유기농가로 하여금 유기양돈 생산을 하도록, 그리고 유통의 방법을 어떻게 할 것인가 결정을 내리는데 도움을 줄 수 있는 그런 비교적 구체적인 정보는 그리 많지 않다. 이 글의 주요 초점은 미국 중부지방에서의 유기축산 생산(주로 돼지)에 관한 배경과, 시장의 추세, 인구적 특성, 미국의 기준들에 비추어 생산과 유통에 관한 결정 및 고려사항들에 대한 개관을 제시해 보는 일이다. 농장 수준에서 의사결정은 토지, 노동, 금융과 사회적 자본과 같은 자원을 각종 기회와 더불어 고려하여 이루어져야 한다. 이러한 결정은 모두 농장 차원을 넘어 각종 기준과 시장에서의 세력들의 맥락을 보고 이루어져야 한다. 각 개인의 수준에서는 농업인 역시 유기 흑은 환경친화적 농업에 관한 확신, 바꾸어 보겠다는 결심, 생활양식과 가족에 대한 영향, 그리고 농업인과 가족 경영에 대한 계획의 지평이라고 하는 범위 내에서의 유기적 방식으로의 전환에 관하여 결정을 내려야 한다.aotic motion)의 해석도 가능하다. 이 글에서는 비선형 진동해석을 위한 정규모드 동역학에 대한 연구동향 및 기본 이론을 살펴 보았고, 그 적용 예를 통하여 실험결과와 비교 고찰 함으로써 정규모드 동역학의 적용성을 서술하여 보았다. 선형이론으로 이해하기 어려운 현상들에 대하여는 비선형의 관점에서 새롭게 접근하 려는 노력이 필요하며 비선형 이론에 대한 연구가 지속적으로 진행되어야 한다. 진행되어야 한다.VA코드를 사용하여 흡기포트와 연소실 그리고 밸브의 움직임을 동시에 고려한 수치해석을 도입하였다. 하지만 이들이 밸브의 운동을 고려하기 위해 사용한 이동격자는 격자점은 시간에 따라 변화하지만 그 격자의 수가 일정하게 유지되어 있어서 밸브의 완전개폐를 해석할 수가 없다. 강희정[6]은 단일 실린더와 단일 배기밸브를 갖는 문제로 단순화하여 피스톤과 밸브의 움직임을 고려하므로써 배기행정 후 소음이 어떻게 전파해 나가는가를 연구하였다. 본 연구에서도 최소밸브간격과 최대밸브간격 사이에서만 계산이 가능하나 흡기의 경우는 밸브가 닫힐 때 생기는 압력파가 중요하므로 실린더와 밸브사이에 벽면조건을 주어 밸브의 개폐를 모사하였다.술을 보유하고자 한다. 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile whereas relaxivity at high field is not affected by τS. On the other hand, the change in τV does not affect low field profile but strongly in fluences on both inflection fie이 and the maximum relaxivity value. The results shows a fluences on both inflection field and the maximu

• Archives of design research
• /
• v.15 no.4
• /
• pp.177-188
• /
• 2002

A thousands of chairs have designed from the Victorian era to the present. Thonet's Nol4 chair in 1859, Wright's high-back chair in 1904, Ritveld's red/blue chair in 1917, Breuer's Wassily chair in 1925, Aalto's Paimio chair in 1932, Eames's DAR chair in 1948, Piero Gatti's Sacco chair in 1969, Starck's Von Volgelsang chair in 1984, Stumpf's Aeron Chair in 1992, Little's 'Coat of arms' chair in 1994 - the list of architects who have seized the opportunity to express their theories in the design of a chair is seemingly endless. Architects such as Machintosh(1868-1928), Wright(1807-1959), Aalto(1898-1976) included chairs within their artistic schemes for interiors and buildings. But as the manufacture of chairs moved away from the domain of the craftsman towards that of the industrial process, architects were also ideally positioned, with their background knowledge of engineering, to pioneer innovative chair design within the constraints of modern manufacturing technology. Beyond matters of function and structure, the fundamental worth of chairs, past or present, lies in their communication of attitudes, ideas and values. The persuasiveness of a chair depend on the clarity of its rhetoric. Chair has become an ideal medium for designers to make their visual statements and construct their individual manifestos. In chair design there is a ping-pong game played out between absurd and useful design, and this game is one way in which the design profession explores itself.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.232-241
• /
• 2017

This paper presents an automated cow-feeding system based on an AGV and screw conveyor for domestic livestock farms, which are becoming larger and more commercialized. The system includes a hopper module for loading pellet-type mixed feed at the top of the system, a transfer module mounted with a screw conveyor to transfer feed from the hopper module to the outlet module, an outlet module composed of belt conveyors, and an electromagnetic guided driving-type AGV. The weight of the loaded feed is measured by a load cell located under the transfer module. The system reads the feed discharge information stored in RFID tags installed in each cowshed cell, and a predetermined amount of feed is discharged while the AGV is moving. A cow-feed test system was constructed to determine the design parameters of the screw conveyor in the transfer module that determine the feeding capacity. These parameters include the screw's outer diameter, the screw shaft outer diameter, and screw pitch. The parameters were applied to the finalized cow-feed system construction. A DSP-based main controller and cow-feeding algorithm for different scenarios were also developed to control the system. Experimental results confirmed that the system could supply a total of 21 kg of feed uniformly at 420 g/s for a cowshed cell which has 7 cows. The driving distance was 5 m and the speed was 0.1 m/s. Thus, the proposed system could be applied to standardized domestic livestock farms.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.136-145
• /
• 2007

Redevelopment about land that nature green tract of land and dilapidated city equipment including greenbelt make a strong resolution in city with change of town planning area according to growth of city is consisting. Formation of city of these phenomenon is old and personality of city changes rapidly, the speed becomes fast. Phenomenon that Busan moves to neighborhood area as convenience of traffic of industrial facilities that was on spearhead of economic growth move to outer wall of city and port facilities is deterioration, as becoming decline Tuesday industry form of city in the second industry the third phenomenon that alter by the 4th happen and case of residential area old residential area of inland area change for the worse of habit be and impulse to steal is augmented in the 1970, 80 is appearing. Hereupon the result inland area which analyzes the change with the use area compared to the area where it is coming in contact to the coast the diffusion of the residential area or the business park appears area, the factory back of nine cities acts Gangseo-gu or Gijang-gun of the industry area this with the fact that it changes.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.3
• /
• pp.164-170
• /
• 2000

Neutron single crystal and powder diffraction techniques have been applied to the structure analysis of yttria-stabilized zirconium, Z $r_{0.73}$ $Y_{0.27}$ $O_{1.87}$., prepared by the skull-melting method. The crystal structure has been determined to be cubic symmetry, space group Fm/equation omitted/ with a=5.155(2)$\AA$, V=136.99(5)$\AA$, Z=4, and R(F)=5.65%, $\omega$R(I)=10.57% for 70 integrated intensities of Bragg Peaks observed from single crystal of Z $r_{0.73}$ $Y_{0.27}$ $O_{1.87}$. The stabilizer atoms randomly occupy the zirconium sites and there are displacements of oxygen atoms with amplitudes of $\Delta$/a~0.033 and 0.11 along <110> and <100> directions from the ideal positions of the fluorite structure, respectively. There are no significant differences in crystallographic data between the single crystal and powder studies. Diffraction pattern after Rietveld refinement, using neutron powder data, has shown the evidence of a tetragonal impurity phase, or a slight tetragonal distortion.

• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.87-93
• /
• 2019

Recently, the number of passengers using airplanes is rapidly increasing due to the increase of overseas travelers. Therefore, the probability of exposure to natural radiation due to altitude is increasing due to the increase in flight time. Cosmic-ray penetrates the Earth's magnetic field belt Van Allen, which is located at an altitude of 400 km to 1200 km. Most cosmic rays are blocked at Van Allen belt. However, cosmic-ray could be not completely blocked, and a small amount of cosmic-ray affects the earth. In general, if the altitude was increased by 100m, the natural exposure dose increased by 0.03 mSv on the Earth. In this study, I tried to minimize the exposure to natural radiation in airplanes when boarding airplanes. Especially, I was aimed to minimize radiation exposure by protecting the highly sensitive thyroid gland among human organs. According to the results of the study, the designed shielding handkerchief was able to shield cosmic natural radiation dose by more than 70%. In conclusion, the application of the shielding handkerchief made in this study can be effectively shield natural radiation.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.2
• /
• pp.107-124
• /
• 2015

The 'Imjin System' (or Rimjin System) was established in 1962 as a new stratigraphic unit separated from the Upper Paleozoic Pyeongan System based on the discovery of brachiopods and echinoderms of possible Devonian age. Subsequent discoveries of the Middle Devonian charophytes confirmed the Devonian age of the system. The Imjin System is distributed in the Imjingang Belt between the Pyongnam Basin and the Gyeonggi Massif, spans from the eastern areas including Cholwon-gun of the Gangwon Province, Gumchon-gun, Phanmun-gun, and Tosan-gun of the Hwanghaebuk Province, to the western areas of Gangryong-gun and Ongjin-gun of the Hwanghaenam Province, and includes the Yeoncheon Group (metamorphic complex) to the south. Unlike the lower Paleozoic strata in the Pyongnam Basin which solely produce marine invertebrate fossils, the Imjin System yields diverse non-marine plant and algal fossils. Brachiopods of the system are similar to those from the Devonian of the South China Block and include taxa endemic to the platform, implying a close paleogeographic affinity to the South China Block. The Imjin System is generally considered as of Middle to Late Devonian in age, although there have been suggestions that the system is of the Middle Devonian to Carboniferous in age. North Korean workers postulated that the Imjin System was deposited in the current geographic position, where the "Imjin Sea" (an extension of the South China Platform) was located during the Devonian. The Imjin System displays strong local variations in stratigraphy and its thickness. It has recently been reported that the strata are repeated and overturned by thrust faults in many exposures. The Yeoncheon Group a southward extension of the Imjin System, also experienced intense tight folding and contractional deformation. Northward decrease in metamorphic grade within the system suggests that the northern part of the Gyeonggi Massif and the Imjingang Belt are probably an extension of the Dabie-Sulu Belt between the South China and Sino-Korean blocks, and the Imjin System is an remnant of accretion resulted from the collision between the two blocks. In order to understand tectonic evolution and Paleozoic paleogeography of eastern Asia, further studies on stratigraphic, sedimentologic and tectonic evolution of the Imjin System involving scientists from the two Koreas are urgently needed.