• Archives of design research
• /
• v.12 no.3
• /
• pp.73-80
• /
• 1999

Many domestic users complain about severe pain to the waist, neck, and shoulder as well as work performance because the domestic chair design was developed with western anthropometry dimension and design criteria. Ergonomic design standards are needed for office chair design to reduce stress and poor physical posture for various user body types. In this study, we have suggested design dimensions recommended from previous studies and Korean anthropometry data. We also have reviewed users' preference dimension through measured subjects and analyzed differences between users' preference dimension and the previous design criteria to verify physical appropriateness. We evaluated general office chairs and adjustable chairs which can adjust to fit each person. we also analyzed how each design dimension was reached and affected the human body by evaluation of physical discomfort and comfort. We have found seat height is very important in a workstation. If the seat height is high, it effects the thigh. If width, height, and angle of the backrest are wrong, fatigue to the shoulder, neck, and waist, etc.. As a result of this experiment, we suggested that the height of a seat for Koreans be 425mm for the fixed type and 365-484mm for the adjustable type. Also other design recommendations were suggested in the thesis. In conclusion, our research will be very important in the database because it provides adjustable ranges to fit user's body types in the various design fields.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.262-269
• /
• 2007

The blur phenomenon obscuring the boundary between the field of designers and that of users may be the key paradigm in the 21st century. However, we observed a number of chair design cases that could be considered as the results of blur pheonomenon in the furniture design field from mid 1960s. The backgrounds include the repulsion against the uniform functionalism, deliberation on the life in the future and the development of plastic materials and their processing methods. Under such backgrounds, the designers pursued the new and futuristic furniture design. In that process, what is about the "freedom" that the consumers as well as the designers should have in using the furniture was the important concept. This concept enabled the creation of chair design inducing the participation of consumers. They created various kinds of shapes, functions and structures that the consumers became interested in as if they had fun with toy blocks by mainly using the new material "plastic". In a formative aspect, the entire shape is classified into the organic shape and geometric shape. The unit types are divided into two kinds; type that the unit of simple shape is repeated only with size difference and irregular combination type of the units comprised of more than two shapes. In the functional aspect, some cases showed the transformation and expansion of the function more variously. Other cases changed the function of chairs to tables, cabinets, or objects. In the structural aspect, on the basis of the method assembling each unit, one method is to assemble using the hardware and the other is to assemble only with intrinsic units of chair. The chair design created by the blur phenomenon between the designers and the users as described above causes the blur phenomenon between the furniture and the space where the furniture is installed. Accordingly, it is expanding the furniture design sphere including the case that the furniture is not selected as the rifle article depending on the characteristics of interior space but it becomes the element leading the characteristics of space. This study aims to estimate the change of interior space and the furniture that my cause the blur phenomenon by examining the cases above appropriate for the paradigm of the 21st century. Furthermore, this study will enable the discussion oil the directions of future furniture design based on its results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.6
• /
• pp.535-540
• /
• 2015

The location of the pivot between the backrest and seat pan of a reclining chair should be identical to the hip joint center to prevent unpleasant user experiences during tilting motion. However, mechanical friction occurs in the pin-in-slot joints that are installed under the seat pan as an alternative to the hinge joint. This reduces the reaction force between the backrest and the occupant's back when reclining and returning to an upright position, which causes the occupant's discomfort. In this study, bearings, rollers, and sliders were suggested as alternatives for the pin component, and the percentage of the reaction force on the backrest was measured while reclining the backrest and subsequently returning it to an upright position. The results show when bearings, rollers, and sliders were used for the pin-in-slot joint, the percentages of the reaction force were $59.7{\pm}10.3$, $47.2{\pm}13.6$, and $30.3{\pm}18.1$, respectively, indicating that the friction of the bearing was the lowest among the three pin components. Because the three alternatives have different manufacturing costs, synthetic judgment requires the consideration of not only mechanical friction but also user experience.

• Archives of design research
• /
• v.11
• /
• pp.48-58
• /
• 1995

In 1981. KOREA applied YEAR OF WORLD DISABLED DESIGNNATED BY UN as starting point to begin noticing disabled and gradually improve and understand the problems of the disabled.This study considering the income level and welfare level selected basic most widely used wheelchair as subject of study. Design Application of this study's main analysis are as follolVs 1. MAN-MACHINE INTERFACE STUDY ANALYSIS!Basic concept of wheelchair is for persons uncapable of move by sitting down. so main focus of study was considered on equipment which on chair. 2. WHEELCHAm MOVEMENT STUDY ANALYSISlThrough movement and test measurement which can be considered as basic study of Ergonomics, observe movement changes accordingly. 3. BACK(MAIN) WHEEL AND HANDRIM MOVEMENT ANALYSIS / Seat and wheel as the most important component of a wheelchair, study the relation of handrim and hand movement and test the most effective and comfortable handrim. Direction of the study was concerntrated on three areas, with results and information collected, would like to suggest design change of X type collapsible chair in areas of size of SEAT(air pocket type), HANDRIM(anti-slip hump), ARMHEST(transfer movement, rubber padding. accent), and HANDLE(adjustable, round type). The content started this study is only one small position of understanding the disabled. Also, the importance of one of many business of assisting disabled rehabilitation. (IJISABLED, REHABILITATION. APPROACH)

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.142-151
• /
• 1997

본 연구는 주부들의 주활동공간인 부엌가구와 공간의 설계에 있어사용하기 편리하며 가사활동에 따 른 피로를 경감시키고 요통과 같은 주부직업병을 예방할 수 있는 부엌가구와 공간의 개발에 그 목적을 두었다. 연구는 먼저 수도권의 32평형 규모의 아파트150가구를 대상으로 설문조사를 실시하였으며, 만 24시간동안의 실제 가사활동을 Video로 촬영하여 동작분석을 실시하였다. 그 결과 주부들은 수납의 용 이성과 공간의 크기, 작업대의 높이 등을 가장 많은 개선사항으로 지적하였으며, 절반이상의 주부들이 앉은 자세에서 작업이 이루어졌으면 좋겠다고 응답하였다. 또한 동작분석 결과 작업의 70%이상이 개수 대를 중심으로 조리대와 가열대 주변의 한정된 공간에서정적으로 선 자세에서이루어지는 것으로 파악 되었다. 이러한 선 자세에서의 작업에 따른 피로도를 감소시키기 위하여 입좌식 의자를 도입하였으며, 개수대를 씽크대의 'ㄱ'자 코너에 위치하여 주방활동시의 이동거리를 단축하고자 하였다. 피로도의 경감 을 측정하기 위하여 입좌식 의자를 도입한 개선된 씽크대와 기존의 입식씽크대에서 가사활동시 요구되는 주부들의 에너지 대사량을 비교하기 위하여 심장박동수와 산소호흡량을 측정하였다. 실험결과에 따르면 주방에 입좌식의자를 도입한 경우가 가사활동에 요구되는 에너지 소모량이 심장박동수와 산소호흡량의 기준에서 각각 평균적으로 30%와 57.5% 이상이 감소하는 것으로 파악되어 이러한 부엌가구의 도입으로 주부들의 가사활동에따른 피로도가 절반 가까이 감소될 수 있음을 니타내었다. 또한 부엌가구의 재배치 에따른 가사활동시 이동거리가 평균적으로5.5%이상이 감소하는 것으로 나타났다. 본 연구결과를 주방설 계에 적용할 경우 가사활동의 효율성과 편리성이 향샹됨은 물론 가사활동에따른 피로도를 경감 시키고 요통 등의 주부직업병을 예방할 수 있을 것으로 기대된다.1일 1회씩 4회 투여한 군에서도 암수에 상관없이 전 농도 군에서 염색체이상을 나타내지 않아 유전독성을 나타내지 않음을 관찰하였다. 특히 vitamin C와 E의 병용투여는 상승적으로 적용하여 간세포손상을 더욱 억제시킴을 알 수 있었다.mance and on TFP(Total Factor Productivity) growth which is a pure measure of firm performance. To utilize the advantage of panel data, FEM(Fixed Effect Model) and REM(Random Effect Model) were used. The empirical result shows that the entropy index as a measurement of inter-business relatedness is not significant but technological relatedness index is significant. OLS estimates on pooled data were considerably different from FEM or REM estimates on panel data. By introducing interaction effect among the three variables for business portfolio properties, we obtained three findings. First, only VI (Vertical integration) has a significant positive correlation with ROS. Second, when using TFP growth as an dependent variable, both TR(Technological Relatedness) and f[ are signif

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.29-35
• /
• 1992

본 연구에서 검토한 바와 같이 컴퓨터 시뮬레이션은 실차실험과 다소의 오차는 있지만 매우 값싼 환경에서 컴퓨터장비에 거의 종속되지 않고 연구가 가능하므로 충돌실험이 고가인 관계로 여러 경우를 시도할 수 없는 경우 즉, 조인트 성격변화, 의자위치, 벨트의 신율 및 체결상태, 에어백의 장착여부 등에 대한 변화가 있을 때에 이미 확립된 모델에 입력데이타를 수정 혹은 추가함으로써 충돌시 반응을 예상할 수 있을 것으로 기대된다. 그러나, 본 연구에서는 비록 우수한 모델링이 확립되었다 할지라도, 차종이나 주변환경이 바뀔때는 다시 모델링을 해야 되는 문제가 남게 되며 이때 필요한 대상차에 대한 입력데이타가 새로이 정의되어야만 한다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.215-218
• /
• 2002

In this paper, we applied composite material of high specific stiffness and strength to the fabrication of a folding wheelchair frame for the replacement of conventional metal wheelchair frames. A one-body composite frame was designed and the finite element analysis was performed on this design. Some specimens of joint parts were manufactured and strength test was done. With the results of analysis and test, some modification was done and a prototype was produced.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1515-1516
• /
• 2013

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1383-1384
• /
• 2010

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2000.11a
• /
• pp.98-99
• /
• 2000

금속가구란 가구의 구성 프레임이 금속재(철강, 알루미늄, 청동 등)로 된 가구를 말하며, 실제로 금속가구에 사용되는 주요 소재로 철강재가 많이 사용돼 금속가구를 통상 철제가구라고도 부른다. 국내의 연간 가구생산량의 71.5%가 목제가구이며, 금속제 가구가 28.5%를 차지하고 있다. (중략)