• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.290-296
• /
• 2021

The effect of draw ratio (8, 10, 12, 14 times) and additive CaCO₃ content (0, 0.5, 1.0, 1.5, 2.0, and 3.0 wt%) on the properties of high-performance PE monofilament was investigated in this study. As the draw ratio increased (8-14 times), the melting enthalpy (ΔHf), crystallinity, specific gravity, and tensile strength increased significantly. However, the draw ratio had little effect on the melting temperature (Tm) and crystallization temperature (Tc). The seawater fastness (stain and fade) of the hydrophobic PE monofilament prepared in this study showed an excellent grade of 4-5 in all draw ratios. To investigate the effect of the additive CaCO₃ content on the properties of high-performance PE monofilament, the draw ratio was fixed at 14 times. It was found that the tensile strength of the PE monofilament sample containing 0.5 wt% of CaCO₃ was much greater compared to the sample without CaCO₃, but the elongation of the sample containing 0.5 wt% of CaCO₃ was much less than the sample with 0 wt% CaCO₃. However, in the case of the sample containing more than 0.5 wt% CaCO₃, the tensile strength slightly decreased and the elongation slightly increased as the CaCO₃ content increased. The seawater fastness (stain and fade) of the hydrophobic PE monofilament showed excellent grades of 4-5, regardless of the amount of additives. From the above results, it was found that the maximum draw ratio of 14 times with an additive of 0.5 wt% CaCO₃ are the optimal conditions for manufacturing high-performance marine fusion materials with various fineness (denier) with high strength and low elongation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.1
• /
• pp.37-45
• /
• 2021

This study observed the release of microplastics according to washing weights and filtering conditions, measured microplastic generation rates, fiber lengths, and fiber diameters. This study attempted to present data for the development of filters that decrease microplastic generation. For test samples, polyester piled knit fabric (cut-pile) was selected, which currently has the highest amount of consumption in the clothing industry, but can easily cause marine pollution because of its low biodegradability. For test equipment, a drum washer was used and microplastics were collected using two filter pore sizes, 5 ㎛ and 20-25 ㎛. Microplastic fibers weights and lengths were measured. The results of the experiment showed the following: 1) The release of microplastics differed according to the fabric weights and washing process; 2) washing fabric weights showed a differences in the collection amount according to the filter pore size (5 ㎛, 20-25 ㎛); 3) observations of differences in the lengths of the microplastics that occur during the washing process by filter pore size were made. Fibers with shorter lengths appeared with filter pore sizes of 5㎛ in comparison to filter pore sizes of 20-25㎛. The results from this study on microplastic generation by fabric during washing, demonstrated the following conclusions that can be used to reduce the release of microplastics. First, the release of microplastics according to fabric weights and washing courses are affected by physical force. Therefore, it is necessary to reduce the amount of physical force due to water flow, increase the fabric weight, or wash the material in low temperatures. Second, in the manufacturing of washing machines, microplastic filtration can be promoted or legislatation supporting microplastic filtration can be introduced.

• Journal of Appropriate Technology
• /
• v.6 no.1
• /
• pp.56-64
• /
• 2020

Recently, major manufacturers are focusing their efforts on securing global competitiveness through smart factory, but developing countries have many difficulties in applying smart factory due to financial and technical conditions. This study is a preliminary study on the development of an ICT-based power monitoring system applicable to developing countries. The questionnaire surveyed and analyzed workers' perceptions of smart factory in a garment manufacturing factory in developing countries, Indonesia. Before and after the installation of the power monitoring system, the survey was conducted for 126 local managers and workers, and the correlation was analyzed using SPSS. As a result of analysis, factory workers in developing countries such as Indonesia are also positively aware of the necessity of introducing smart factory technology, and it is expected that the introduction of these technologies will affect job satisfaction and improve the factory environment. In addition, the result of the survey conducted after the installation of the power monitoring system increased the job satisfaction score by 5.5% compared to before the installation, and the scores on the perception of the necessity of the power monitoring system and the positive effect of the application of the system on the factory environment were increased 13% and 5.9%, respectively. It was also confirmed that managers rather than workers and female rather than male showed positive perception for the introduction of smart factory technology. The result of this study is expected to be an important reference in the direction of development of appropriate smart factory technology applicable to developing countries and the introduction of smart factory by manufacturers operating factories in developing countries.

• The Journal of Society for e-Business Studies
• /
• v.27 no.1
• /
• pp.29-41
• /
• 2022

Since the first sale of a banner advertisement in 1995, electronic commerce has become a new transaction channel for consumers. With more than 20 years of its history, electronic commerce has become an important consumption channel for everyone and inexperience is no more a reason that discourages the consumption through this channel. The great expansion of this channel is now a formidable thereat to traditional channels. However, products with high asset specificity and complexity are still having difficulty to be traded over the online channel where the experience of the products for a consumer is limited. Especially, variations of the same product's quality depending on how pre-owners used the product and high complexity to describe the quality of the products prevent used goods from being traded over e-channels. Added to that, the information asymmetry between sellers and buyers for used goods makes the establishment of market transaction difficult. Considering the challenges, the current case study discusses thredUP, a clothing resale platform company. In this paper, we study how the company could overcome those limitations in this toughest resale market through the use of AI for dynamic pricing and standarized product quality ratings. In addition, we also hope to provide readers with the opportunity to understand the secondhand industries and its market, and see where it is heading for in the future.

• Information Systems Review
• /
• v.19 no.2
• /
• pp.71-94
• /
• 2017

Recommender systems reduce information overload and enhance choice quality. This technology is used in many services and industry. Previous studies did not consider recommendation quantity and the repetitive recommendations of an item. This study is the first to examine recommender systems by considering recommendation quantity and repetitive recommendations. Only a limited number of items are displayed in offline stores because of their physical limitations. Determining the type and number of items that will be displayed is an important consideration. In this study, I suggest the use of a user-based recommender system that can recommend the most appropriate items for each store. This model is evaluated by MAE, Precision, Recall, and F1 measure, and shows higher performance than the baseline model. I also suggest a new performance evaluation measure that includes Quantity Precision, Quantity Recall, and Quantity F1 measure. This measure considers the penalty for short or excess recommendation quantity. Novelty is defined as the proportion of items in a recommendation list that consumers may not experience. I evaluate the new revenue creation effect of the suggested model using this novelty measure. Previous research focused on recommendations for customer online, but I expand the recommender system to cover stores offline.

• The Research Journal of the Costume Culture
• /
• v.29 no.4
• /
• pp.572-584
• /
• 2021

The emergence of environmental and social issues has led to global discussions for the realization of sustainable development. The purpose of this study is to propose a method of sustainable fashion design using waste Hanbok, focusing on men's Hanbok with cultural values. The study utilizes literature research and fashion design development. From the literature study, reform was judged to be a higher concept encompassing reduction, recycling, and upcycling. Reduction is a design method through removal, and recycling design transforms from its original form into a completely different product. Upcycling design focuses on improvement and change in functionality. Accordingly, nine redesigns using men's Hanbok were developed from which three were produced. Consequently, the reduction design demonstrated a small range of variation without changing the item, and cultural sustainability was confirmed through the design that removed the components and recombined the Hanbok. Second, recycling redesign can be reconstituted into a different item. Third, upcycling enables various designs through module assembly, which prolongs the lifespan of the product and confirms its value as a raw material for waste Hanbok. This study is meaningful in realizing sustainable fashion and suggesting practical measures for the sustainability of Korean traditional culture and creative fashion design planning.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.2
• /
• pp.133-146
• /
• 2021

It is important to conduct an anthropometric study to develop garment patterns to accommodate the changes found in the body size and type of men in their 30s, to effectively address fit dissatisfaction. Thus, this study aims to explore changes in the lower body sizes and body types of men in their 30s, and provide basic measurements for designing pants patterns. For this purpose, key anthropometric dimensions for the lower body of men in their 30s, which were acquired by the 6th (2010) and 7th (2015) survey conducted by Size Korea, were analyzed using SPSS 24.0 for Windows. Independent sample t-tests were conducted on major lower body sizes to track changes over time. Factor and cluster analyses were used to classify lower body types. From the comparison of the 6th (2010) and 7th (2015) surveys, it was found that the overall lower body size of men in their 30s were increasing in the height-related aspects, circumference, thickness, and width-as well as body weight and BMI. The five factors were derived to determine the typical lower body types of men in their 30s and the body types were classified into three categories through cluster analysis: (1) those with the largest body size, body volume, and obesity, (2) those with smallest body size, lower body volume, and obesity degree, visually the most skinny type, (3) those with BMI and weight that are the smallest, like Type 2, but the main circumference of the lower body is lower. In order to visually look at the statistical analysis, results were presented by producing a avatar based on the main lower body values.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1903-1914
• /
• 2008

The purpose of this study was to propose an efficient and feasible global market entry strategy for the Korean apparel industry by analyzing the Italian fashion industry. In particular, the study investigated the role of foreign exhibitions and showrooms supported and organized by Italian fashion organizations. The methodology for this study was to analyze industrial reports, review previous studies and conduct in-depth interviews with 23 industry experts in Italy, Korea and LA. The results indicated that the most prominent factor in the Italian fashion industry was the fashion cluster, which is a strong and organic network of diverse fashion related areas No matter the size of the enterprise, firms can get practical, prompt and efficient support from diverse associations. The network operated by the associations provides strong support to each firm by organizing collections and exhibitions, and providing promotional activities. Showrooms and agents are another supportive "gate keeper", directly related to an enterprise's sales. However, Korean fashion firms did not have enough information or knowledge for foreign exhibitions, nor did they make aggressive promotional efforts in the global market. Despite the many fashion-related associations exist in Korea, their programs are too focused on visible accomplishments and are too oriented on "big company" and "big voice", rather than many "small firms". In conclusion, the Korean fashion industry-particularly the fashion industry in Seoul-has strong potential to become the center of the global fashion market in the future. However, the fashion support system that can act as the channel to promote firms and to meet global buyers needs to be supplemented. To feasibly create this system, government or industry associations should develop a strong and generous support system and network, and they must recognize the need for small firms to exist.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1991-2001
• /
• 2009

This study provides basic information that is needed to build marketing strategies related to consumer brand-switching, through the investigation of consumer motivations for brand-switching, as determined by the types of fashion products. The study was implemented by a descriptive survey method using a questionnaire. The survey was conducted during the period of May $11^{th}$ through July $5^{th}$ 2008. A total of 184 completed responses were analyzed. All respondents were from the Seoul area and between the ages of 20 and 31. Factor analysis and Cronbach's alpha coefficients, one-way ANOVA and Duncan test were employed for the analysis of data. Significant differences were found in brand-switching motives according to the types of fashion products. For clothing, shift behavior occurred more often in conjunction with the attributes of the products itself, such as design, color, price, size, and fiber content. In general, clothes more than shoes, were likely subject to brand-switching most often on the basis of situational factors. On the other hand, for shoes, more brand-switching activities occurred because of non-product attributes, such as discounts, coupons, desire for a change, and wearing of friends. In light of the results, there is a need to differentiate brand related marketing strategies with respect to clothing and shoes. For clothing, efforts focusing on the improvement of the product attributes will be more effective in minimizing brand-switching. There is also a need to improve instructions for increasing the product understanding of salespersons as well as the ability to give advice in accordance with personal consumer characteristics. With regard to shoes, greater efforts should be given to promotional activities, and the desire of consumers for a change in order to prevent brand-switching of customers.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.3
• /
• pp.131-146
• /
• 2004

The Purpose of this study is to suggest strategies for environmental education through the Practical Arts(TechnologyㆍHome economics) Subject in a viewpoint of the clothing & textiles resources to resolve problems in the clothing life area. For this, this study was carried out through review of literature which is related with the consumption, the environmental problems, the environmental policies, and regulations of the government and new environmental technologies, of clothing & textiles industries and environmental education. The major findings of the study were as follows; 1) The environmental education system model in a viewpoint of the Clothing & Textiles resources was developed. This model system is consisted with interactions on school, government, industry, home and non-government organizations. Thus, the fact that Practical Arts(TechnologyㆍHome economics) Subject were the most effective subject to teaching the environmental education viewpoint of the Clothing & Textiles resources was confirmed. 2) The standards were analysed out to analyse the contents in the clothing area of the Practical Arts(TechnologyㆍHome economics) Subject. It were consist of 4 factors and 12 elements under the factors: Awareness of clothing & textile resources(clothing consumption, production of clothing & textile and environmental problems). Planning and buying of clothing(planning, buying), Management of clothing(understand of textile. human body & environment, laundering and Environmental pollution, arrangement & conservation) Recycling & exhaust of clothing(contribution, redesign, recycling, exhaust) 3) Analysing the current Practical Arts (TechnologyㆍHome economics) subject from the Environmental education in the clothing section, the environmental education related with clothing were taught the most in the middle school course, and environmental contents were concentrated in the recycling factors. but not so much on other factors. 4) After analysing the Practical Arts (TechnologyㆍHome economics) subject, the strategies were suggested for reinforcing the environmental education in the clothing of the Practical Arts(TechnologyㆍHome economics) subject.