• Science of Emotion and Sensibility
• /
• v.16 no.1
• /
• pp.85-94
• /
• 2013

Recently, researches of piezoelectric energy harvesting were tried and in this study, a piezoelectric energy harvesting clothes was developed. First, piezoelectric energy harvesting zone on the extremities were drawn by 3D motion capturing and as a result, the hip, the elbow, and the knee were determined. A new structure of piezoelectric harvester was developed for appling to clothes. Because it needed to be flexible and sensitive for human body, the 2 layer stacked structure was proposed. A prototype of seamless garment was designed for a harvesting clothes because it needed to be body-tight and not to restrict the movement. High peak-to-peak voltages were acquired from the energy harvesting clothes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.7
• /
• pp.998-1006
• /
• 1999

This study has investigated the relation between the sewing speed and seam breaking strength applied perpendicular to the seam direction. Breaking strength efficiency breaking mode of seams were examined under various sewing conditions using three kinds of sewing threads and four kinds of fabrics. The results obtained are as follows : 1. According to the increase in sewing speed seam strength was remarkably decreased. Seam strength and its loss difference were shown variously as threads and fabrics were mixed. 2. In case of fabrics with higher strength seam strength showed higher. And the seam strength was determined by the loop strength. 3. In case of fabrics with lower strength seam strength and its difference for every sample showed lower. So the strength of fabrics dominated the seam strength than those of threads. 4. In the experiment using various fabrics and sewing threads there was a type of thread appropriate to each fabric. Fabrics and threads with have similar physical properties were shown proper seam efficiency. 5. The breaking mode was different for every sample seam that was tested.

• Fashion & Textile Research Journal
• /
• v.18 no.3
• /
• pp.351-362
• /
• 2016

Domestic sewing industry is showing signs of a redevelopment and the demands of the sewing technician are gradually increasing. This study would investigate the opinions of sewing technicians about job environments and training situation in order to solve the shortage of sewing manpower. As a result of a survey with 100 sewing technicians, of the pay systems, the salary system showed the highest satisfaction and preference. Their satisfaction with pay was low. There was a tendency that they work on Saturdays and national holidays, and their satisfaction with the number of holidays was low. Most worked for 10 to 11 hours per day, and they showed low satisfaction with their working hours. There were no places to rest in the company. They showed law satisfaction with the air and vent. The sewing technicians were concerned about respiratory and musculoskeletal diseases because of the working and workplace environment and needed places to rest, vent facilities, and spacious and comfortable spaces. The total lead-time that they were sent to the field as skilled workers was 1 to less than 2 years; they received training from seniors; and the training period, mostly, was 6 months to 2 years. Most of the sewing technicians surveyed had the expertise, did not feel the necessity of retraining related to their tasks, and did not have any willingness to take reorientation due to a lack of time even with their tasks.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.4
• /
• pp.648-660
• /
• 2021

This study analyzes how sewing conditions for elastic bands on woven fabrics affect elongation. The directions of the elastic bands were vertical, horizontal, vertical and horizontal crossing, and horizontal and vertical crossing. Intervals between the elastic bands were 3.0 cm and 6.0 cm. The woven fabric was tailored for the elastic band sewing using warp, weft, and bias. Consequently, it was possible to visually confirm elongation differences according to the sewing condition of the elastic bands. A detailed examination demonstrated that the horizontal or vertical placement of elastic bands tailored in a crosswise direction produces high vertical elongation and low horizontal contraction. However, elastic bands sewed in crossing directions, regardless of warp and weft directions, resulted in both high vertical elongation and high horizontal contraction. In all cases, the more elastic bands were used, the higher the horizontal elongation. In conclusion, appropriate placements of elastic bands on woven fabric increases motion convenience.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.11a
• /
• pp.167-171
• /
• 2002

나날이 급변하는 국제경쟁사회에서 가격경쟁에서 살아남기 위하여 많은 기업들은 중국, 인도, 대만등의 국가에서 원사(原絲)를 수입하여 제직을 하고 있다. 하지만, 그들 원사에 관한 기초물성 Data가 미비한 실정이다. 그러나 소비자들이 요구하는 고감성 의류를 제조하기 위해서는 이들 원사들의 기초물성에 대한 정확한 Data가 있어야만 소재(素材)의 특성을 정확히 파악하여 고감성 의류의 봉제가 가능하다. 따라서 본 논문에서는 이들 국내외에서 생산되는 PET의 기초물성의 편차가 감성 의류에 미치는 영향에 관하여 연구하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.60-70
• /
• 2017

This study selects representative materials and sewing methods used to: produce medical compression clothing in domestic garment, understand physical properties according to sewing conditions before and after knitting, and propose a sewing method that can improve the functional properties of the medical pressure clothing for burn patients. This experiment used samples from two knitted fabrics of high-frequency, produced and sold among fabrics used to produce medical compression clothing in Korea. Sewing methods were N321, N502 and N601, most commonly used in the press clothing industry. Fabric A is most often reduced in EMT values when sewing N502. However, N321 and N502 are suitable sewing methods for the reliable to twist at the larger torsional shear and the larger 2HG, 2HG5 value. Fabric B is sewn with N601, the EMT value is the most elevated, LT value is also low and extensibility improves after sewing. N601 is shown as an appropriate sewing method for warp knitting. When sewing with N321, the torsional is stable but elongation is lacking. N502 is not good for torsional stability.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.2
• /
• pp.350-357
• /
• 2001

In this study, seam strength, seam elongation and seam efficiency of polyurethane coated fabrics were examined under various sewing conditions using three kinds of fabrics, four kinds of sewing threads and three kinds of stitch lengths. And the sewability of polyurethane coated fabrics were evaluated by FAST system. The results were as follows: 1. Seam strength decreased with the increase of stitch length. The loop strength of sewing thread and the type of base fabric than the type of coated surface had an effect on seam strength. 2. Seam elongation also decreased with the increase of stitch length and was affected by the type of base fabric. The tensile elongation of polyurethans coated fabric had an effect on seam elongation. 3. Sean efficiency also was related to stitch length, the type of base fabric, and seam strength. The suitable seam efficiency was within 50%∼65% in which polyurethane coated fabric and sewing thread broke at the same time. Therefore PS thin and PPC thin sewing threads and 3mm stitch length were suitable to polyurethane coated fabrics. 4. The relaxation shrinkage(RS) of polyurethane coated fabric was smaller than the smallest value of control chart in FAST system. And the extensibility(E) and the shear rigidity(G) were larger than the largest value.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.3
• /
• pp.474-485
• /
• 2018

Smart sensors and connected devices have changed the concept of garments along with IT technology convergent garments that transform the performance of basic functions. Various types of products have been researched and developed due to the increased interest in smart clothing; in addition, studies based on physical and mechanical properties have also been actively studied to improve accuracy and reliability. This study represents a basic study for the development of smart textiles based on motion recognition for the surfing practice of beginners interested in IT convergence type. A physical durability evaluation of conductive yarn according to sewing method was later carried out. This study is a conditional specimen sewn with cotton lower thread and 100mm pattern length based on the results of previous studies. The durability of the conductive yarn according to the sewing method was evaluated according to the sewing method. Durability was evaluated by two kinds of repeated strain and abrasion tests. The specimen with applied cotton in a lower thread zigzag pattern 2mm stitch size 100mm stitch length was shown to have the most suitable durability for smart textile.

• Science of Emotion and Sensibility
• /
• v.11 no.1
• /
• pp.123-129
• /
• 2008

The purpose of this study is to analyse the effect of weaving preparatory process characteristics on the PET fabric sensibility through assessment of handle, garment formability and sewability for the enhancement of the physical property of the PET fabrics. For this purpose, eleven fabric specimens processed on the interlacing, pirn winder, 2-for-1 twister, weaving and dyeing and finishing processes were prepared and processing tension and interlacing intensity after each process were measured with various processing conditions.

• Fashion & Textile Research Journal
• /
• v.23 no.1
• /
• pp.129-141
• /
• 2021

This study investigated fabrics, washing and cares, design, pattern, subsidiary materials, and sewing methods with a focus on the functional outers using moisture-permeable waterproof fabric as a shell; in addition, each element was analyzed for differences depending on fabric type. The characteristics of 34 outers were investigated through labels, online product introductions, visual inspection, observations from two experts with more than 30 years experience and wear tests. Moisture-permeable waterproof fabrics used for the outer were classified into two types; in addition, the shell of the high-density fabric and the 2 & 3-layer fabrics had different characteristics. Various fabrics, detailed designs, and three-dimensional patterns suitable for each part of the human body were used to improve functionality. In addition, various subsidiary materials and sewing methods were used to form an organic relationship. The same washing and cares, patterns and subsidiary materials were used regardless of fabric type; however, the fabric type influenced the detailed design and sewing. The outers with high-density fabric had a loose fit, short placket, e-banded cuffs, lock-stitch, and lock-stitch+binding. However, the outer with 2 & 3 layer fabric had a slim fit, hood width adjustment, zippered pockets, cuffs with tab, seamless adhesive sewing such as laminating, lock-stitch+ seam-sealing, and welding.