• The Korean Journal of Food And Nutrition
• /
• v.12 no.6
• /
• pp.597-601
• /
• 1999

Chitosan을 Bacillus pumilus BN-262 유래의 chito-sanase로 처리한 경우에는 trimet, tetramer, pentamer 가 전체 올리고당 중 64,3%에 달하는 비교적 저분자의 chitooligosaccharides로 구성괸 chitooligosacch-aride I을 얻을수 있었다 그러나 Trichoderma viride 유래의 cellulase로 처리한 경우에는 중합도 7이상의 것이 전체 올리고당 중 49.3% 에 달하는 상대적으로 분자량이 큰 chitooligosaccharides로 구성된 chitoolig-osaccharide II을 얻을수 있었다. 따라서 생리적 기능성이 높은 hexamer 이상의 chitooligosaccharides를 얻기 위해서는 chitosanase의 처리조건을 달리하여 분해가 덜 일어나도록 하거나 cellulase와 같은 효소를 처리함으로써 chitosan의 부분적인 분해를 유도하는 것이 필요하고 판단되었다. Chitin과 chitooligosac-charides의 응집성에 대하여 조사하였다 고분자의 chitosan은 2가 음이온을 함유하는 무기화합물 및 고분자의 유기화합물과 반응하여 응집이 일어났다. 분해가 많이 일어난 chitooligosaccharide I 은 무기물질과는 침전하지 않았으나 고분자화학불을 함유하는 유기화합물과는 반응하여 침전이 일어났다 분해가 적게 일어난 chitooligosaccharide II 는 2가 음이온을 함유하는 무기화합물 및 고분자의 유기화합물과 반응하여 침전이 일어났다.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.1
• /
• pp.85-89
• /
• 2008

The purpose of this study is to understand the removal possibility of microalgae using inorganic coagulants in coagulation and sedimentation process for water treatment. Removal of microalgae was studied according to coagulant type(Alum and PAC), coagulation factors(alkalinity, coagulant dosage, and setting time), and size fraction of microalgae. The contribution of applied coagulants for removal of microalgae was also examined. The removal rate of the microalgae by change of alkalinity was most high in 25 mg/L of alkalinity(Alum) as 87.2% and 30 mg/L of that(PAC) as 90.1%. Optimal coagulant dosage to remove the microalgae was 40 mg/L(removal effi.; 88.1%), and PAC was 50 mg/L(removal effi.; 90.1%). Alum was better than the PAC to remove the microlgae. In the water treatment processes such as rapid slow mixing and sedimentation the removal efficiency of microalgae with coagulants was 2 times higher than that of without. In optimal condition, the removal efficiencies of microalgae were nanoplankton > microplankton > picoplankton. Especially, the removal efficiency of the picoplankton was very low as below 30%.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.795-801
• /
• 2016

This study is on the denitrification process using the sodium alginate and $CaCl_2$ as a flocculant. Removal techniques of nitrate nitrogen from waste water are reverse osmosis, ion exchange, electro dialysis and biological method etc. We tried to remove nitrate nitrogen with flocculation and sedimentation method in the present study. Calcium alginate is expected to form a chelate bond with nitrate nitrogen in the solution. So the effects of flocculantt component, flocculation reaction time, molar ratio of the flocculant, flocculant injection rate are studied to determine the best removal rate of nitrate nitrogen. In addition, we tried to determine the nitrate nitrogen removal mechanism by analyzing the structure and component ratio of the configuration after the agglutination precipitate by FE-SEM and EDS. As a result, the nitrate nitrogen removal mechanism is turned out to form calcium-nitro-alginate, and the best mole ratio of flocculating agent is 1 : 1, the injection rate of the flocculant was up to 2%, the removal rate of the nitrate nitrogen to be 56.7% in the synthetic wastewater.

• Clean Technology
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2004

In this study, the performance of Aluminium foil etching waste(PWF100) as a cohesive agent was estimated and the methods to commercialize it were investigated through comparison of physical properties between Aluminium foil etching waste(PWF100) and commercial cohesive agent(PAC17). The height of sediment bed was measured according ot the change of the concentration of BKN-100, BKR-110, and BKR-120 prepared by using PWF100. When the concentrations of BKN-100, BKR-110, and BKR-120 were increased, the heights of sediment bed were constant after decreased. Also, the density of sediment bed was investigated according to the change of the concentration of BKN-100. When the concentrations of BKN-100 were increased, the densities of sediment bed were decreased. In addition, based on the concentration of BKN-100, BKR-110, and BKR-120, the sediment rate was experimented. When the concentrations of BKN-100, BKR-110, and BKR-120 were increased, sediment rates were rapid and then slow. Moreover, the volumes of sediment bed were measured according to the change of the concentration of BKN-100. According to increasing the concentrations of BKN-100, the required time for getting to the minimum volume of sedment bed were reduced and then increased. Lastly, the required time for sedimentation based on the concentration of BKN-100, BKR-110, and BKR-120 was investigated. When the concentrations of BKN-100, BKR-110, and BKR-120 were increased, the required times for sedimentation were increased after decreased. From these results, it can be concluded that the PWF100 acts as a cohesive agent.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.3
• /
• pp.171-178
• /
• 2013

In this study, the sludge that occurs in the initial operation of coagulation system developed for the treatment of CSOs were returned to the flocculation reactor. The purposes of this study were to analyze the Characteristics of flocs that are generated through the recycling sludge and settling characteristics of sludge, and to evaluate the possibility that high concentrations of particulate matter in the initial inflow of CSOs could be used as an weighted coagulant additive. As a result, the concentration of treated CSOs pollutants at the beginning of the CSOs influent with a large amount of particulate matter over 20 ${\mu}m$ was low, after gradually increasing the concentrations of them. The flocs generated from the sludge return were similar in size compared to flocs generated through injection of micro sands, and settling velocity in case of return sludge injection was decreased from 55.1 cm/min to 21.5 cm/min. SVI value of the sludge accumulated at the bottom of the sedimentation tank was 72, and settled sludge volume decreased rapidly due to the consolidation of sludge to the time it takes to 10 minutes. these mean that sludge used for recycling has good settling characteristic. A condition of returned sludge which is 0.1% return of 0.3% extraction was formed in the balance of settlement and extraction. In this case, This condition was to be adequate to maintain the proper concentration such as 100~200 mg/L of TS and 50~100 mg/L of VS in the flocculation reactor. The usage of the return sludge containing particulate matters of CSOs as an weighted coagulant additive was able to secure a stable treated water quality despite the change of influent water quality dynamically. Furthermore, it can be expected to reduce the alum dosage along with the sludge production.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.3-10
• /
• 2016

The passive treatment was required a large area for the treatment of acid mine drainage (AMD), and pollutants were discharged with mine drainage by the increased flow rate in summer. This study was performed to improve the turbidity and to precipitate the pollutants quickly using coagulants and flocculants in AMD of abandoned mine sites that were difficult to build the passive treatment system. The coagulant PAC (Poly aluminium chloride) and flocculant PAM (Polyacrylamide) were selected to improve turbidity in W mine waters. We also tested the particle size analysis, ICP-OES and/or SEM-EDS for water and sludge samples.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1304-1309
• /
• 2006

In this study, removal efficiencies of treatment processes with C. tracer which is similar to the characteristics of Cryptosporidium were investigated. The highest removal efficiency of C. tracer was 97.16% when the input dose of PACI(Poly aluminium chloride, $Al_2O_3$(10%)) was 10 mg/L. The higher turbidity and SS removal efficiencies were, the more C. tracer cohesion efficiency increased. Also when pH of the raw water was high, removal efficiency of C. tracer increased. As the correlationship($R^2$) between effluent turbidity after coagulation-precipitation and removal efficiency of C. tracer was 0.9506, removal efficiency of Cryptosporidium could be evaluated by effluent turbidity after coagulation-precipitation. Also the range of C. tracer removal efficiency by sand filtration was $94.00{\sim}95.83%$ and the correlationship($R^2$) between effluent turbidity after filtration and removal efficiency of C. tracer was 0.8704. Therefore, when filtration-effluent turbidity is good under the optimized coagulation condition, removal efficiencies of Cryptosporidium by coagulation-precipitation, sand rapid filtration and sand rapid filtration after coagulation-precipitation are estimated as 1.55 log(97.16%), 1.38 log(95.83%) and 2.31 log(99.51%) respectively.

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2013

A pilot scale coagulation system, which has a function of physicochemical treatment, was developed to treat Combined sewer overflows(CSOs). This coagulation system requires evaluation of optimum design factors whether it has reflected those of lab scale system, moreover, the pilot scale system can be evaluated differently according to the characteristics of influent CSOs even though it has reflected lab scale's design factors. We conducted an experiment using lab scale system that could treat $1m^3$ of CSOs in a day, and also pilot-scale system with $100m^3/day$ CSOs flowed into the Cheongju sewage treatment plant. Therefore the aim of this study is to evaluate a hydraulic similarity between the design factors of pilot scale and those of lab scale coagulation system, and to evaluate feasibility of the coagulation system for the CSOs treatment with optimum operation conditions. From the result of pilot-test, we drew the optimum operation factors of in line mixer and flocculator having similarities with those of lab scale system as well as the optimum coagulant dose. Finally we confirmed that the coagulation system has feasibility to treat the CSOs with high removal efficiency.

• Journal of Energy Engineering
• /
• v.10 no.2
• /
• pp.114-119
• /
• 2001

TRIGA Mark-II&III 연구로서의 운영과정에서 발생된 방사성 슬러리 함유 폐액에 대하여 음이온, 앙이온, 그리고 비이온 응집제를 첨가하였을 때의 여과 효과를 실험실 규모의 진공여과 장치로 연구하였다. 여과 실험 자료를 이용하여 Darcy’s Law에서 유도된 여과 케익 저항 값을 산출하였다. 응집제 사용으로 응집제를 사용하지 않은 경우롸 비교하여 케익 저항값의 개선은 있었지만, 수분함량은 증가하였다. 각각의 응집제 사용에 따른 침전율, 여과 케익의 수분함량, 그리고 여과 케익 저항 값을 비교한 결과 음이온 응집제 12~16ppm/$\ell$ waste를 사용하였을 경우가 가장 효과적인 것으로 나타났다.

• Economic and Environmental Geology
• /
• v.38 no.3 s.172
• /
• pp.273-284
• /
• 2005

Coagulation and precipitation process by using lime$(Ca(OH)_2)$ and calcium carbonate $(CaCO_3)$ were applied to remove heavy metals from groundwater in laboratory scale. From results of batch tests, by the addition of $0.3\;wt.\%$ lime, more than $90\%$ of As and Mn were removed and $70-80\%$ of Cd and Zn were removed by using $0.5\;wt.\%$ of lime. Removal efficiency of Pb almost reached $100\%$ with only $0.1\;wt.\%$ of calcium carbonate and more than $93\%$ of Cd were removed by the addition of $0.1\;wt.\%$of calcium carbonate. Pilot scale column experiments were performed to remove heavy metals in the separation process of precipitated Hoc to supernatant after the coagulation/ precipitation. For lime as a coagulant, more than $99\%$of As were removed from artificial groundwater and removal efficiencies of Cd, Mn, and Zn were over $80\%$. By using calcium carbonate, more than $95\%$ of Cd and Pb were removed in column experiment. Fe and Mn contaminated groundwater taken from a real landfill site, Ulsan was used for the column experiment and more than $99\%$ of Fe and Mn were removed by the addition of $1\;wt.\%$ lime in column experiment, suggesting that the coagulation/precipitation process by using lime and calcium carbonate have a great possibility to remove heavy metals from contaminated groundwater.