• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.1
• /
• pp.85-89
• /
• 2008

The purpose of this study is to understand the removal possibility of microalgae using inorganic coagulants in coagulation and sedimentation process for water treatment. Removal of microalgae was studied according to coagulant type(Alum and PAC), coagulation factors(alkalinity, coagulant dosage, and setting time), and size fraction of microalgae. The contribution of applied coagulants for removal of microalgae was also examined. The removal rate of the microalgae by change of alkalinity was most high in 25 mg/L of alkalinity(Alum) as 87.2% and 30 mg/L of that(PAC) as 90.1%. Optimal coagulant dosage to remove the microalgae was 40 mg/L(removal effi.; 88.1%), and PAC was 50 mg/L(removal effi.; 90.1%). Alum was better than the PAC to remove the microlgae. In the water treatment processes such as rapid slow mixing and sedimentation the removal efficiency of microalgae with coagulants was 2 times higher than that of without. In optimal condition, the removal efficiencies of microalgae were nanoplankton > microplankton > picoplankton. Especially, the removal efficiency of the picoplankton was very low as below 30%.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.590-596
• /
• 2012

Enhanced coagulation is best available technologies to treat NOM in water to produce clean drinking water. In this research, the comparison experiments between conventional coagulation (CC) and enhanced coagulation (EC) using 4 type coagulants i.e., ferric chloride, aluminium sulphate (alum), poly aluminium sulphate organic magnesium (PSOM) and poly aluminium chloride (PACl) were performed in terms of surrogate parameters such as dissolved organic carbon (DOC), trihalomethane formation potential (THMFP), haloacetic acid formation potential (HAAFP) and zeta potential variation in order to find out the most effective coagulant and conditions to fit Nakdong River water. When applied to EC process, the turbidity removal efficiency did not increased gradually compared to the CC process when adding coagulants. Furthermore, the removal efficiency of turbidity became decreased much more as coagulants were added increasingly whereas the removal efficiency of DOC, THMFP and HAAFP became increased by 13~18%, 9~18% and 9~18% respectively compared to the CC process. The characteristics of turbidity removal showed relatively high removal efficiency considering the pH variation in entire pH range when using $FeCl_3$ and PACl. Additionally, in case of alum and PSOM steady removal efficiency was shown between pH 5 and pH 8. In terms of DOC surrogate the coagulants including 4 type coagulants indicated high removal efficiency between pH 5 and pH 7. The removal efficiency of dissolved organic matter (DOM) in EC between less than 1 kDa and more than 10 kDa augmented by 11~21% and 16% respectively compared to the CC process. The removal efficiency of hydrophobic and hydrophilic organic matter proved to be increased by 27~38% and 11~15% respectively. In conclusion, the most effective coagulant relating to EC for Nakdong River water was proved to be $FeCl_3$ followed by PSOM, PAC and alum in order.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.05a
• /
• pp.356-359
• /
• 2005

하수를 처리하는 공정에서 해마다 슬러지의 발생량은 증가하고 있으며, 이를 효과적으로 처리하는 것이 매우 중요하다. 따라서, 본 연구는 경제적이면서도 측정이 간편한CST(Cap-illary Suction Time)을 통해 슬러지 의 탈수성 과 적 정 주입량을 산출하는 방법을 연구하였다. 이를 위하여 본 실험의 대상인 도시 하수슬러지에 대하여 함수율 및 pH변화, 무기 및 유기 응집제의 주입량 변화, 그리고 응집제 투입 후 침전된 응집제량을 조사하여 탈수성을 조사하였다. 슬러지의 함수율을 97%, 98%, 99%로 했을 때, CST는 99%일 때가 가장 적은 값으로 나타났다 응집제 주입 후 침전된 슬러지의 생성량은 응집제가 증가됨에 따라 증가하다가, 최적 주입량보다 더 많은 응집제를 주입할 경우에는 그 양이 감소했다. 이는 형성된 응집물의 구조적 특성의 변화를 나타내고 있음을 알 수 있다. 위와 같은 실험 결과를 통해 CST는 수분이내(< Smin)에 슬러지의 탈수성을 신속하게 측정할 수 있는 방법이며 비교적 정확하게 측정할 수 있음을 알 수 있다. 뿐만 아니라 응집제의 최적 주입량 및 응집물의 구조적 특성을 평가하는 데에도 유용하게 사용할 수 있다.

• Journal of Embryo Transfer
• /
• v.18 no.1
• /
• pp.15-25
• /
• 2003

발생학에서 키메라(chimera)는 2개 이상의 다른 유전자형의 세포, 또는 다른 종의 세포로부터 만들어진 1개의 생물개체를 뜻하는 말로, 이는 초기 수정란의 발달과 포유류의 분화를 연구하는데 이용되고 있다. 키메라를 만드는 방법에는 할구와 내세포괴를 응집시키는 방법과 배반포 내에 여러 종류의 세포를 주입하는 방법이 있다 본 실험에서는 서로 다른 두 가지 방법의 활성화 처리법, 즉, ionomycin 처리 후 Cycloheximide (CHX) 또는 6-Dimetylaminopurine (6-DMAP)에 따른 단위 발생란의 분할과 단계적인 발달율을 살펴 보고자 하였으며, 서로 다른 방법에 의해 생산된 단위발생란 유래의 할구와 체외수정란 유래 할구를 응집하여 키메라 수정란(chimeric embryo)를 만든 후 체외수정란과 발달율을 비교해 보았다. 도축장 유래의 난소에서 난자를 채취하여 체외에서 22~24시간 성숙시킨 후 난구세포를 제거하고 metaphase II 단계의 난자를 5 $\mu$M ionomycin에 4분간 처리한 후, 10 $\mu$g/ml CHX/5 $\mu$g/ml cytochalasin B (CCB)에 5시간 또는 1.9 mM 6-DMAP에 4시간 처리하여 분할율과 배반포기 발달율을 비교 조사하였다. 난자 분할율에서는 체외수정란과 6-DMAP처리 단위 발생란에서 각각가 83.7 와 85.5%로 CHX/CCB 처리 단위발생란의 57.9%보다 유의적으로 높게(P<0.05) 나타났으며, 배반포기 발달율에 있어서는 체외수정란의 발달율이 27.8%로 6-DMAP처리 활성란 12.3%와 CHX/CCB 처리 활성란 5.3%보다 유의적으로 높게 (P<0.05) 나타났다. 키메라 수정란(chimeric embryo)은 서로 다른 두 가지 처리에 의해 생산된 단위발생란의 할구 2개와 체외수정란 유래의 할구 2개를 빈 투명대 내에서 응집시켜 제조하였다 빈 투명대 내에 키메라 수정란(chimeric embryos)의 8 세포기까지의 발달율은, 체외 수정란 할구 2개와 CHX/CCB 처리에 의한 할구 2개를 응집한 그룹은 46.1%, 체외 수정란 할구와 6-DMAP 유래 할구 2개를 응집한 그룹은 52.8% 였으며, handled control은 54.7%로 체외 수정란 77.7%에 비해 유의적으로 낮게(P<0.05) 나타났다. 배반포기까지의 발달율은 체외 수정란과 CHX/CCB에 의해 생산된 키메라 수정란(chimeric embryo)은 12.8%, 체외 수정란과 6-DMAP에 의한 키메라 수정란(chimeric embryo)은 18.8%로 handled control의 21.4%에 비해 유의적으로 낮았으며(P<0.05), 이들 키메라 수정란(chimeric embryos)은 체외 수정란의 34.9%에 비해 유의적으로 낮게(P<0.05)나타났다. 6-DMAP 처리 단위발생이 유기된 수정란 할구 2개와 체외수정란의 할구 2개의 응집에 의한 키메라 수정란(chimeric embryos)의 발달율이 CHX/CCB와 체외수정란의 응집에 의한 키메라 수정란(chimeric embryos)에 비해 다소 높게 나타났으나, 유의적인 차이는 없었다. 본 실험의 결과 서로 다른 방법에 의한 단위 발생란 유래의 할구와 체외 수정란 유래의 할구가 응집에 의한 재조합이 가능하였고 이들을 체외에서 배양하여 배반포기의 수정란까지 발달시켰다.

• Microbiology and Biotechnology Letters
• /
• v.26 no.3
• /
• pp.206-212
• /
• 1998

The effects of the pretreatment with coagulants on the recovery efficiency of poly (3-hydroxybutyrate, PHB) synthesized in Alcaligenes eutrophus were investigated. Al-base or Fe-base coagulants, and the dispersion method of 30% hypochlorite solution and chloroform were used as coagulants and PHB recovery method, respectively The recovery efficiency of PHB from the cells harvested with Al-base coagulants at the range from 0 to 1000 mg-Al/L was similar to that from cells harvested without the coagulants. At these conditions, the concentrations of residual aluminium in the purified PHB were below 250 mg-Al/kg-PHB, indicating the effect of residual aluminum on the characteristics of the purified PHB can be insignificant. When the dosage of coagulants was over 1000 mg-Al/L, the PHB recovery remarkably decreased with increasing the coagulant dosage. However, the PHB recovery could be enhanced by the use of 50% hypochlorite solution instead of 30% hypochlorite solution. Even though the reduction of PHB recovery efficiency was not found by using Fe-base coagulants, the purified PHB was stained pale red due to residual iron, These results suggest that the use of Al-base coagulants did not exert bad influence on neither PHB recovery efficiency and PHB purity.

• Journal of the Korean Society for Environmental Technology
• /
• v.19 no.6
• /
• pp.563-569
• /
• 2018

The efficiency of wastewater treatment using microalgae was investigated in this study, focusing on nutrients and flocculation. In the experiments for reducing nutrients by incubation of microalgae, the total phosphorus and total nitrogen were removed over 92 % and 99 %, respectively. The higher flocculation rates as the average values 94% of Poly Aluminum Chloride(PAC) and 92 % of $FeCl_3$ were presented for the flocculation experiments under the conditions of Auto-flocculation and various additives. Also, the optimal(minimal) concentrations for over 90 % of flocculation were 30 mg/L and 40 mg/L for PAC and $FeCl_3$, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.11
• /
• pp.729-734
• /
• 2012

During chlorination processes dissolved organic nitrogen (DON) can form toxic nitrogenous disinfection byproducts and organic chloramines which have little or no bactericidal activity. DON needs to be removed before chlorination processes to reduce the formation of those products. This study investigated the removal of DON from surface water and reclaimed water by coagulation with aluminum sulfate (alum) and a cationic polymer (polyDADMAC). Removal characteristics of dissolved organic carbon (DOC) and ultraviolet absorbance at 254 nm ($UVA_{254}$) were compared with that of DON. Coagulation with alum removed DON, DOC, and $UVA_{254}$ with similar trends, but the removal of $UVA_{254}$ was highest. A dual coagulation strategy of alum and cationic polymer improved the removal of DON. Coagulation with cationic polymer alone was not effective due to its narrow range of charge neutralization. DON in reclaimed water was easier to remove than that in surface water, and higher molecular weight fraction (>10,000 Da) of DON was preferentially removed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2321-2327
• /
• 2015

Three coagulants, alum sulfate(alum), poly aluminum chloride(PAC) and poly aluminum silicate chloride (PASC), were used to remove low to high turbidity and TOC in surface and ground blended water. Laboratory experiments and pilot plant experiments were carried out to evaluate the optimal coagulant and its dosage. To determine the optimized coagulant and its dosage, the turbidity, TOC and pH were measured. The experimental results showed the best removal performance using PASC. The optimal dosage of PASC between 3-20 NTU was found to be 15 mg/L in the jar test. In the pilot test, a 15 mg/L PASC dosage was applied and resulted in the efficient removal of turbidity and TOC between 3.6-27 NTU. The removal efficiency of PASC increased with increasing turbidity and TOC.

• Composites Research
• /
• v.27 no.5
• /
• pp.190-195
• /
• 2014

This paper predicts the complex permittivity of MWNT added epoxy depending on agglomeration by numerical analysis. 1wt% MWNT added epoxy specimen is prepared using 3-roll-mill method and its complex permittivity is measured in X-band (8.2~12.4 GHz) using freespace measurement system. The analytic model is comprised of cube epoxy and perfect sphere agglomeration. The complex permittivity of the agglomeration model is predicted by complex permittivity mixing rule using the measured complex permittivity of epoxy and 1 wt% MWNT added epoxy. Commercial electromagnetic analysis software, CST, is used to obtain S-parameter of the analytic model and MATLAB code is used to calculate complex permittivity from the S-parameter. It is confirmed that the complex permittivity increases when the agglomeration size decreases.

• Current Research on Agriculture and Life Sciences
• /
• v.7
• /
• pp.83-97
• /
• 1989

This study was carried out to obtain basic information necessary for aggregation and in-vitro culture of mouse embryos by treating phytohemagglutinin-p (PHA-P). The 4-, 8-cell and morula embryos were obtained from female mice of albino BALE/C, CBA and C57BL strains, those were injected 5 i.u pregenant mare serum gonadotrophin and 5 i.u human chorionic gonadotrophin to superovulation. The zona pellucidia was removed by placing the embryos in Acidic Tyrode solution containing 1.0% protease or/and 5 ug/ml PHA-P. The pairs of zona free embryos were subjected to aggregation by glassneedle in BMOC-3 containing 5 ug/ml PHA-P. The aggregation embryos were cultured in Brinster's mouse ova culture-3(BMOC-3) medium under the gas phase of 5% $CO_2$ in air $37^{\circ}C$ for 13 to 50 hours. The results obtained in this study are summarised as follows : 1. When 4-, 8-cell and morula embryos were zona-freed in acidic Tyrode solution containing 1.0% protease or/and 5 ug/ml PHA-P, and cultured in vitro to blastocysts, the 4- and 8-cell embryos showed slightly less development rates than the morula one did, and solution of 5 ug/ml PHA-P brought some higher development rate than negative control. 2. As 2, 5 or 10 ug/ml PHA-P was added to the solution to aggregate 4-, 8-cell or morula embryos, 2 ug/ml solution represented slightly lower aggregation rate than the higher levels solutions, and 4- and 8-cell embryos showed higher rates than morula one did (P<.05). 3. In respect to the development rates of aggregated embryos to morula no significant difference was found among PHA-P levels and between 4-and 8-cell embryos. With respect to those of aggregated embryos to blastocysts the different levels of PHA-P showed similar results, however, the 4- and 8-cell embryos represented higher rates than the morula one did (P<.05). 4. The mean time necessary for development of aggregated 4-, 8-cell and morula embryos to blastocysts were 38.5-40, 26-27 and 19-20hrs. Respectively in solution for aggregation. 5. The aggregation rates of embryos were 34-94%, when treated protease or/and PHA-P. Supplementation of 5 ug/ml PHA-P to the solution for aggregation showed a trend demonstrating higher aggregation rate compared to negative control, although no significance was found. However, 4- and 8-cell embryos represented significantly higher aggregation rates than the morula one did (P<.05). 6. The development rates of 4- and 8-cell embryos to morula were 52.7-84.7 and 73.8-87.2%, respectively, showing no significant difference between two cell stages. However, the aggregation rates of embryos treated with solution containing PHA-P were higher than negative control (P<.05). 7. The development rates of 4- and 8-cell and morula embryos to blastocysts were 41.7-77.7 78.7-83.0 and 0-19.2%, respectively. The rates of 4-cell embryos treated with PHA-P were significant higher than the negative control (P<.05). The 8-cell and morula embryos also showed more rates when treated PHA-P.