• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.273-280
• /
• 2003

The purpose of this study is to identify and evaluate the competitiveness of ports in ASEAN(Association of Southeast Asian Nations), which plays a leading role in basing the hub of international logistics strategies as a countermeasure in changes of international logistics environments. This region represents most severe competition among Mega hub ports in the world in terms of container cargo throughput at the onset of the 21 st century. The research method in this study accounted for overlapping between attributes, and introduced the HFP method that can perform mathematical operations. The scope of this study was strictly confined to the ports of ASEAN. which cover the top 100 of 350 container ports that were presented in Containerization International Yearbook 2002 with reference to container throughput. The results of this study show Singapore in the number one position. Even compared with major ports in Korea (after getting comparative ratings and applying the same data and evaluation structure), the number one position still goes to Singapore and then Busan(2) and Manila(2), followed by Port Klang(4), Tanjugn Priok(5), Tanjung Perak(6), Bangkok(7), Inchon(8), Laem Chabang(9) and Penang(9). In terms of the main contributions of this study, it is the first empirical study to apply the combined attributes of detailed and representative attributes into the advanced HFP model which was enhanced by the KJ method to evaluate the port competitiveness in ASEAN. Up-to-now, none have comprehensively conducted researches with sophisticated port methodology that has discussed a variety of changes in port development and terminal transfers of major shipping lines. Moreover, through the comparative evaluation between major ports in Korea and ASEAN, the presentation of comparative competitiveness for Korea ports is a great achievement in this study. In order to reinforce this study, it needs further compensative research, including cost factors which could not be applied to modeling the subject ports by lack of consistently qualified in ASEAN.

• Journal of Dairy Science and Biotechnology
• /
• v.29 no.2
• /
• pp.25-35
• /
• 2011

The objectives of this study were to evaluate the sensory characteristic quality of commercial milk brands selling in the market under the preservation at the temperature of $7^{\circ}C$ and $10^{\circ}C$ stored during the period of shelf-life. Quantitative descriptive analysis after developing of descriptive terms and cluster characterization by PCA analysis over a total of 128 LTLT, HTST, UHT and UHT-ESL milks, were conducted by 8 trained panelists. A total of fourteen attributes; three aroma attributes (grassy, milky, cultured milk aroma) and seven flavor/taste attributes (sweet, salty, sour, milk, cooked, cheesy, paper board) and one aftertaste attributes (rancid flavor) and one texture attributes (viscous), were developed as descriptive terms. Significant differences (P<0.01) in the sensory attributes; sweet, milky, cheesy etc. in UHT milk and sour, cheesy, paper board, rancid etc. in UHT-ESL milk were also found between the two different temperatures within the shelf life, but both type of pasteurized milk samples (LTLT and HTST) showed significant differences (P<0.01) in the attributes, such as cultured milk aroma, salty, sour, cheesy, rancid in LTLT milk and grassy, milky, salty in HTST milk and difference (P<0.05) in cultured milk aroma for HTST milk. Therefore, from the viewpoint of not only hygienic quality but also sensory characteristics, it is required for the better acceptance of milk consumers to amendment on the regulation in relation to the preservation standard of pasteurized milk as well as UHT milk to lower than $7^{\circ}C$.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.85-94
• /
• 2005

Most of product designers use 3D CAD system as a inevitable design tool nowadays and many new products are developed through a concurrent engineering process. However, it is very difficult for novice designers to get the sense of reality from modeling objects shown in the computer screens. Such a intangibility problem comes from the lack of haptic interactions and contextual information about the real space because designers tend to do 3D modeling works only in a virtual space of 3D CAD system. To address this problem, this research investigate the possibility of a interactive quantified structure simulation for product design using AR(augmented reality) which can register a 3D CAD modeling object on the real space. We built a quantified structure simulation system based on AR and conducted a series of experiments to measure how accurately human perceive and adjust the size of virtual objects under varied experimental conditions in the AR environment. The experiment participants adjusted a virtual cube to a reference real cube within 1.3% relative error(5.3% relative StDev). The results gave the strong evidence that the participants can perceive the size of a virtual object very accurately. Furthermore, we found that it is easier to perceive the size of a virtual object in the condition of presenting plenty of real reference objects than few reference objects, and using LCD panel than HMD. We tried to apply the simulation system to identify preference characteristics for the appearance design of a home-service robot as a case study which explores the potential application of the system. There were significant variances in participants' preferred characteristics about robot appearance and that was supposed to come from the lack of typicality of robot image. Then, several characteristic groups were segmented by duster analysis. On the other hand, it was interesting finding that participants have significantly different preference characteristics between robot with arm and armless robot and there was a very strong correlation between the height of robot and arm length as a human body.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.261-272
• /
• 2006

As we cannot think of our lives without a nation, it is closely related to almost every part of our daily lives. The role of government is becoming more important in the complex modern society as an essential element of national authority even though the government has indirect and secondary characteristics in its functional performance. Therefore, the government has to be efficient in planning and executing its policies, and it needs to be representative and fair as part of a national authoritative community. In the 21st century when symbolic and cultural importance of images are becoming more important, it is crucial for the government organizations to have an integrated identity design system that can satisfy both of these requirements of the government. However, the C.I.(Corporate Identity) of each Korean administrative branch has been developed separately and sporadically, which resulted in lack of consistency as part of the government. Shape and material of their C.I.s that follow short term design trend and popularity also lack uniqueness which can be distinguished from those of any private corporation. This may show that our government lacks systematic administrative capability, since image of a feature represents its characteristics and reality, and their recognition and evaluation from others become identity of the feature. In this perspective, the purpose of this thesis is to suggest an identity design system that has certain rules and regularity with wide variety of possible alterations for the central administration in Korea. In order to represent this visually, identity design system with both integrity and variety of possible alteration is created based on traditional Korean culture, especially the concept of Umyang-ohaeng and Samjae.

• Applied Biological Chemistry
• /
• v.49 no.3
• /
• pp.186-191
• /
• 2006

In the present study, an attempt has been made to produce hybrid yeast strains of different useful and dominant characteristics. The hybrid yeast strains were produced by electrofusion and their genetic analysis were performed by RAPD-PCR (random amplified polymorphic DNA-polymerase chain reaction). The protoplast of Saccharomyces cerevisiae KCTC 7904 and Zygosaccharomyces rouxii KCTC 7966 were obtained above 92% when treated with lyticase at $30^{\circ}C$ for $60{\sim}90$ min after the pretreatment of $1{\sim}2%$ 2-mercaptoethanol at $30^{\circ}C$ for $15{\sim}20$ min. The fusant was produced from paired protoplast stage under the electric pulse at high frequency conditions (1.5 MHz/50 pV, 615 $V/256\;{\mu}sec$) within glass-platinum made electrofusion chamber. Changes in RAPD patterns in mother cells and hybrid cells proved that the fusant contains two types of yeast gene originated from its parent. Furthermore, fermentation characters exhibits by the fusant cell confirmed its genetic changes. These results suggest that genetically stable hybrid yeast strains of economic importance can be produced by electrofusion technique and these electrofused yeast cells have an enormous impact in biotechnology and biomedicine.

• Applied Biological Chemistry
• /
• v.17 no.3
• /
• pp.219-234
• /
• 1974

A series of experiments was conducted to study the behavior of the phosphorus added to the soils having the high phorphorus fixing capacity derived from volcanic ash in Cheju Island. Soil samples were taken from different depths of 0-10, 10-30, and 30-50cm in six citrus orchards where heavy application of phosphate fertilizer has been practised. Various forms of phosphorus were determined and phosphorus adsorption experiments were performed. The results obtained can be summarized as follows: 1. The content of inorganic phosphorus fractions determined by the method of Chang and Jackson was: water soluble P

• Applied Biological Chemistry
• /
• v.22 no.2
• /
• pp.109-122
• /
• 1979

Present study was carried out to reduce residual toxicity of BHC insecticides inherent in the organochlorine pesticides. For This end, r-isomer, the most potent insecticidal component among the BHC stereoisomers, was isolated and thus fortified by means of solvent precipitation. In parallel, 3-(2,4,5-trichlorophenyl)-1-methyl urea was prepared in good yield from technical BHC via 1,2,4-trichlorobenzene, 1,2,4,-trichloronitrobenzene, and 2,4,5-trichloroaniline. In addition, certain merit of the compound which make it possible to use as a herbicide is discussed. The results are summarized as follows; 1. Recrystallizing technical BHC from methanol-water binary solvent system, r-isomer was enriched to 49.7% at 95% recovery of r-isomer. 2. By partitioning technical BHC in 85% of methanolic solution into chloroform, r-isomer was fortified to 89.6% at 90.5% recovery of r-isomer. 3. Yield of 1,2,4-trichlorobenzene from technical BHC was greatly dependent upon concentration of alkalies and to less degree on the alkalies. 4. Surfactants, in particular cationic a quartenary ammonium salt, increased yield of 1,2,4-trichlorobenzene from technical BHC by alkaline hydrolysis. 5. Conversion of 1,2,4-trichlorobenzene to 2,4,5-trichloronitrobenzene was effected almost quantitatively utilizing $HNO_3-H_2SO_4$ nitrating agent at low temperature. 6. Yield of 91.4% was observed for the synthesis of 2,4,5-trichloroaniline by reducing 2,4,5-trichloronitrobenzene in the presence of iron turning and hydrochloric acid. 7. Overall yield based on BHC of 3-(2,4,5-trichlorophenyl)-1- methyl urea was 60.8%. 8. Inhibition effects, both germination and growth, 3-(2,4,5-trichlorophenyl)-1-methyl urea on several crops were found comparable to or more potent than those of $linuron{\circledR}\;and\;diuron{\circledR}$. In addition, it was also noted that susceptibility to the prepared compound depended upon the crops as well as specific part (shoots, roots) of the plant exposed to the chemicals.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.4
• /
• pp.42-51
• /
• 2004

Peat humin(p-Humin), humic acid(p-HA) and fulvic acid(p-FA) were isolated from Canadian Sphagnum peat moss by dissolution in 0.1M NaOH followed by acid precipitation. After purification cycles, they are characterized for their elemental compositions and, acid/base properties. Functionalities and carbon structures of the humic fractions were also characterized using FT-IR and solid state $^{13}C$-NMR spectroscopy. Those results are compared with one another and with soil humic substances from literatures. Main purpose of this study was to present a chemical and spectroscopic characterization data of humic substance from peat moss needed to evaluate its environmental applicability. The relative proportions of the p-Humin, p-HA and p-FA in the peat moss was $76\%,\;18\%,\;and\;3\%$, respectively, based on the total organic matter content ($957{\pm}32\;g/kg$). Elemental composition of p-Humin were found to be $C_{1.00}H_{1.52}O_{0.79}N_{0.01}$ and had higher H/C and (N+O)/C ratio compared to those of p-HA($C_{1.00}H_{1.09}O_{0.51}N_{0.02}$) and p-FA($C_{1.00}H_{1.08}O_{0.65}N_{0.01}$). Based on the analysis of pH titration data, there are two different types of acidic functional groups in the peat moss and its humic fractions and their proton exchange capacities(PEC, meq/g) were in the order p-FA(4.91) >p-HA(4.09) >p-Humin(2.38). IR spectroscopic results showed that the functionalities of the peat moss humic molecules are similar to those of soil humic substances, and carboxylic acid(-COOH) is main function group providing metal binding sites for Cd(II) sorption. Spectral features obtained from $^{13}C$-NMR indicated that peat moss humic molecules have rather lower degree of humification, and that important structural differences exist between p-Humin and soluble humic fractions(p-HA and p-FA).

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.3
• /
• pp.189-200
• /
• 2008

In this study, the antioxidative effects, inhibitory effects on elastase, and components of Quercus glauca extracts were investigated. The free radical (1,1-diphenyl-2-picrylhydrazyl, DPPH) scavenging activity $(FSC_{50})$ of extract I fractions of Quercus glauca leaf was in the order: 50% ethanol extract $(12.45{\mu}g/mL)$ < ethyl acetate fraction $(10.47{\mu}g/mL)$ < deglycosylated flavonoid aglycone fraction $(8.57{\mu}g/mL)$. Reactive oxygen species (ROS) scavenging activities $(OSC_{50})$ of some Quercus glauca leaf extracts on ROS generated in $Fe^{3+}-EDTA/H_2O_2$ system were investigated using the luminol-dependent chemiluminescence assay. The order of ROS scavenging activity was 50% ethanol extract $(OSC_{50},\;4.2{\mu}g/mL)$ < deglycosylated flavonoid aglycone fraction $(1.58{\mu}ug/mL)$ < ethyl acetate fraction $(0.66{\mu}g/mL)$. Ethyl acetate fraction showed the most prominent scavenging activity. The protective effects of extract / fractions of Quercus glauca leaf on the rose-bengal sensitized photohemolysis of human erythrocytes were investigated. The Quercus glauca leaf extracts suppressed photohemolysis in a dose dependent manner, particularly deglycosylated flavonoid aglycone fraction exhibited the most prominent celluar protective effect $({\tau}_{50}$, 398.67 min at $50{\mu}g/mL$). Aglycone fractions obtained from the deglycosylation reaction of ethyl acetate fraction among the Quercus glauca leaf extracts, showed 2 bands in TLC and 2 peaks in HPLC experiments (360 nm) as well. Two components were identified as quercetin (55.77%), and kaempferol (44.23 %). TLC chromatogram of ethyl acetate fraction of Quercus glauca leaf extracts revealed 6 bands $(QG1{\sim}QG6)$, Among them, isoquercitrin (QG3), hyperin (QG4), and rutin (QG6) were identified. The inhibitory effect of aglycone fraction on tyrosinase $(IC_{50},\;73.5{\mu}g/mL)$ and elastase $(IC_{50},\;16.2{\mu}g/mL)$ was high. These results indicate that extract / fractions of Quercus glauca can function as antioxidants in biological systems, particularly skin exposed to UV radiation by scavenging $^1O_2$ and other ROS, and protect cellular membranes against ROS. And component analysis of Quercus glauca leaf extract and inhibitory activity on tyeisinase and elastase of the aglycone fraction could be applicable to new functional cosmetics.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.3
• /
• pp.169-176
• /
• 2021

This study aimed to fundamentally understand structural changes of zeolite under pressure and in the presence of different pressure-transmitting media (PTM) for application studies such as immobilization of heavy metal cation or CO₂ storage using pressure. High-pressure X-ray powder diffraction study was conducted on the zeolite-W (K_6.4Al_6.5Si_25.8O₆₄× 15.3H₂O, K-MER) to understand linear compressibility and the bulk moduli in different PTM conditions. Zeolite-w is a synthetic material having the same framework as natural zeolite merlinoite ((K, Ca_0.5, Ba_0.5, Na)₁₀ Al₁₀Si₂₂O₆₄× 22H₂O). The space group of the sample was identified as I4/mmm belonging to the tetragonal crystal system. Water, carbon dioxide, and silicone-oil were used as pressure-transmitting media. The mixture of sample and each PTM was mounted in a diamond anvil cell (DAC) and then pressurized up to 3 GPa with an increment of ca. 0.5 GPa. Pressure-induced changes of powder diffraction patterns were measured using a synchrotron X-ray light source. Lattice constants, and bulk moduli were calculated using the Le-Bail method and the Birch-Murnaghan equation. In all PTM conditions, linear compressibility of c-axis (𝛽^c) was 0.006(1) GPa^-1 or 0.007(1) GPa^-1. On the other hand, the linear compressibility of a(b)-axis (𝛽^a) was 0.013(1) GPa^-1 in silicone-oil run, which is twice more compressible than the a(b)-axis in water and carbon dioxide runs, 𝛽^a = 0.006(1) GPa^-1. The bulk moduli were measured as 50(3) GPa, 52(3) GPa, and 29(2) GPa in water, carbon dioxide, and silicone-oil run, respectively. The orthorhombicities of ac-plane in the water, and carbon dioxide runs were comparatively constant, near 0.350~0.353, whereas the value decreased abruptly in the silicone-oil run following formula, y = -0.005(1)x + 0.351(1) by non-penetrating pressure fluid condition.