• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.4
• /
• pp.286-294
• /
• 2002

This study investigated the effects of stress and time history of overconsolidated clayey soils on pore pressure parameter, A. Laboratory tests were carried out under the conditions of both varying stress and time history. The stress history is classified into (i) rotation angle of stress path, (ii) overconsolidation ratio, and (iii) magnitude of length of recent stress path. The time history is divided into (i) loading rate of recent stress path and (ii) rest time. Pore pressure parameters are different both in the magnitude and trend with the rotation angle, depending on the magnitude of overconsolidation ratio but not in a trend. In addition, the pore pressure parameters have no effects on the magnitude of length of recent stress path except the level of initially small strain, while loading rates of recent stress path have effects on it. Finally, the pore pressure parameters of overconsolidated clays increase with the existence of the rest time, until either the deviator stress exceeds 70 kPa or the strain up to 0.1%.

• Tunnel and Underground Space
• /
• v.13 no.1
• /
• pp.44-51
• /
• 2003

Changes of the hydraulic conductivity resulting from the redistribution of stresses by underground excavation are examined using the strain-dependent hydraulic conductivity modification relation, where the modulus reduction ratio and induced strain are the major parameters. The modulus reduction ratio is defined in terms of RMR(Rock Mass Rating) to represent the full gamut of rock mass condition. Though shear dilation has the effect on the modification of hydraulic conductivity, the extent of it depends on RMR When the extensional strain is applied to a fracture, the hydraulic conductivity increases with the decrease of RMR Loading configuration has the effect on the modification of hydraulic conductivity, where the differential stress mode with a magnitude of the minimum principal stress $($\sigma$_x)$ fixed and a magnitude of the maximum principal stress $($\sigma$_y)$ varied is found to exert the greatest effect on the change of hydraulic conductivity.

• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.155-158
• /
• 2003

Time-dependent flow properties of mustard pastes were measured at various total solid contents $(TS,\;18{\sim}30%)$ and shear rates $(15{\sim}25\;s^{-1})$ using a Haake concentric cylinderical viscometer. Experimental data of the stress decay with time of shearing were fitted to three mathematical models proposed by Weltman, Figoni and Shoemaker, and Hahn. Time-dependent flow behaviour of mustard paste increased with increase in TS, but was found to vary in the range of shear rate investigated. Time-dependent model of Weltman was found to be most applicable $(average\;R^2=0.96)$ for mustard paste. Shear stresses for structure breakdown increased with increase in TS, while the structure breakdown rate decreased.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.513-521
• /
• 2012

The aim of this study was to determine the brittle fracture behavior of reactor pressure vessel steel by considering the temperature dependence of a damage model. A multi-island genetic algorithm was linked to a Weibull stress model, which is the model typically used for brittle fracture evaluation, to improve the calibration procedure. The improved calibration procedure and fracture toughness test data for SA508 carbon steel at the temperatures $-60^{\circ}C$, $-80^{\circ}C$, and $-100^{\circ}C$ were used to decide the damage parameters required for the brittle fracture evaluation. The model was found to show temperature dependence, similar to the case of NUREG/CR-6930. Finally, on the basis of the quantification of the difference between 2- and 3-parameter Weibull stress models, an engineering equation that can help obtain more realistic fracture behavior by using the simpler 2-parameter Weibull stress model was proposed.

• Applied Biological Chemistry
• /
• v.33 no.4
• /
• pp.293-300
• /
• 1990

The physical and chemical properties of dry acorn starch(DS), defatted acorn starch (DFS) and reincorporated acorn starch(RIS) were investigated. Swelling power and solubility of all starch sample, were exhibited two stage behavior. It had a little change on the pasting temperature of DS and DFS but the peak viscosity and breakdown value of DFS was somewhat higher than those of DS and RIS. Flow behavior of gelatinized starch pastes showed a pseudoplastic behavior and flow behavior index was lower than unit The consistency coefficient showed concentration and temperature dependency. The activation energies of DS, DFS and RIS were from $1.70Kca1/g\;{\cdot}\;mol$ to $3.75Kca1/g\;{\cdot}\;mol$.

• Tunnel and Underground Space
• /
• v.19 no.2
• /
• pp.86-94
• /
• 2009

A three dimensional rock joint element was developed considering fracture mechanics and subcritical crack growth to simulate non-linear behavior and the progressive failure of rock joints. Using this 3-D joint element, joint shear tests of rock discontinuities were simulated by a numerical method. The asperities on the joint surface began to fail at stress levels lower than the rock fracture toughness and continued progressively due to subcritical crack growth. As a result of progressive failing in each and every asperity, the joint showed non-linear stress-time behavior including stress hardening/softening and the reaching of a residual stress.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.08a
• /
• pp.156-156
• /
• 2004

• Korean journal of food and cookery science
• /
• v.7 no.3
• /
• pp.1-6
• /
• 1991

Potato starches are obtained from Irish Cobbler (the dry type), Shepody and superior (the intermediate type) and Dejima (the moist type). Rheological properties of heat-gelatinized potato starch paste were studied to elucidate difference of various potato starches. Heat-gelatinized 3 to 7% potato starch paste showed pseudo plasticity in yield stress. As starch paste concentration increased, the values of consistency index was increased. Relationship between logarithmic consistency index and concentration of potato starch paste was linear at 5% starch concentration. Concentration dependence of consistency index and yield stress of Shepody was highest. As measuring temperature increased, the value of consistency index was decreased. Irish Cobbler starch paste at $50^{\circ}C$, Shepody, Superior and Dejima starch paste at $60^{\circ}C$ showed linear relationships with different slopes. The activation energies of Shepody starch paste was 3.97㎉l/㏖.

• The Korean Journal of Rheology
• /
• v.10 no.3
• /
• pp.173-183
• /
• 1998

본 연구에서는 Advanced Rheometric Expansion System(ARES)를 사용하여 대진폭 진동 전단 변형하에서 발생하는 폴리이소부틸렌(PIB) 농후 용액의 비선형 점탄성 거동을 저 장탄성율과 동적점도의 변형량 의존성 및 응력파형의 fast Fourier transform(FFT) 해석을 통해 고찰하였다. 스트레인 진촉을 단계적으로 증가시키면서 측정한 동적 점탄성으로 부터 저장탄성율 및 동적점도의 선형응답한계를 결정하고 이들에 미치는 각주파수의 영향을 조사 하였다. 그리고 응력파형의 Fourier 전개로부터 유도되는 비선형 점탄성함수를 사용하여 비 선형 거동을 설명하였다. 끝으로 비선형 점탄성 거동의 정도를 나타내는 비선형 거동 지수 를 정의하고 이들에 미치는 각주파수의 영향에 대해 검토하였다. 이상의 연구를 통해 얻어 진 결과를 요약하면 다음과 같다.(1) 선형 응답한계는 고분자 용액의 특성시간의 역수보다 높은 각주파수 범위에서는 일정한 값을 유지하지만 특성시간의 역수보다 낮은 각주파수 영 역에서는 각주파수가 감소할수록 증가한다. (2)선형응답한계 이상의 대변형하에서는 3차비선 형 점탄성 함수 이상의 고차항의 영향이 크게 작용하며 이로인해 비선형 거동이 발생된다. (3) 스트레인 진폭을 단계적으로 증가시키면서 측정한 저장탄성율 및 동적점도의 변형량 의 존성은 응력파형의 Fourier transform으로부터 유도된 1차 비선형 점탄성 함수의 변형량 의 존성을 나타낸다 (4) 저장탄성율 및 동적점도의 변형량 의존성으로부터 유도된 비선형 거동 지수는 탄성적 서질과 점성적 성질에 대한 비선형 특성을 평가하기 위한 유요한 방법으로 인정된다. (5) 비선형 점탄성 거동의 정도를 나탄는 비선형 거동지수는 특정한 각주파수에서 최대치를 가지며 또한 탄성적 거동이 점성적 거동에 비해 더욱 큰 각주파수 의존성을 나타낸다.

• Journal of the Korean Vacuum Society
• /
• v.13 no.4
• /
• pp.157-163
• /
• 2004

Dependence of residual compressive stress of diamond-like carbon (DLC) films on relative humidity was investigated. Polymeric, graphitic and diamond-like carbon films were prepared by r.f.-PACVD using methane or benzene with the negative self bias voltage of the substrate ranging from -100 to -800 V. In-situ measurements of the residual stress were carried out in an environment chamber where the relative humidity was varied from 10％ to 90％. In dense DLC film of high residual compressive stress and hardness, we could not observe any change in the residual compressive stress with relative humidity. However, in the cases of graphitic and polymeric DLC films, abrupt change in the residual stress occurred by changing the relative humidity. The quantity of the stress change was inversely proportional to the film thickness, which means that the stress change with humidity is not due to the penetration of the water molecule into the film structure, but due to surface interaction between water molecules and film surface.