• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.128-137
• /
• 2018

In this paper, we propose a novel class separability measure for radar signals. To reduce the sensitivity of the relative aspect angle between a target and radar, to evaluate the discriminatory power of radar signals, the proposed method first calculates the correlation coefficients between two radar cross sections (RCSs) or linearly shifts one-dimensional (1D) radar signals (i.e., high-resolution range profiles (HRRPs)), or rotates two 2D radar signals (i.e., inverse synthetic aperture radar (ISAR) images). Then, it uses the maximum correlation coefficient when two radar signals are best aligned. Next, the proposed method obtains new correlation-based discriminant matrices (CDM) using maximum correlation coefficients. Finally, the cumulative distribution function (CDF) in the CDM and the value corresponding to the specific probability in the CDF are obtained, and this value represents the discriminatory power of the radar signal. Experimental results show that the proposed method can accurately measure the target separability.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.90-94
• /
• 2021

With the increased interest on quiescent place for residential place, the noise generation from facilities needs to be minimized. One important noise source include sounds from operation of elevators. The elevator operates between floors and generates significantly annoying sounds to the nearby living spaces. It is recognized as the significant contributor inducing noise annoyance to residents. Elevator is supported to the building structure at several locations for movements between floors. In this study, the vibration reduction by use of polymer concrete on the support location was demonstrated. By measuring and comparing the vibration generation when supported on cement and polymer concrete, the noise reduction performance was evaluated. The polymer concrete was made in the form of being inserted into the wall that imitates the hoistway. The impact vibration was induced to the bracket and vibration transfer magnitude was measured. The damping ratio was evaluated through normalization and curve fitting of transient response, and comparison was performed for each resin mixing ratio. By use of polymer concrete, it was possible to reduce the vibration generation in an effect manner without sacrifice on the structural rigidity.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.1
• /
• pp.107-117
• /
• 2011

In this study, the effect of temperature-induced uncertainty to damage monitoring using acceleration-impedance response features is analyzed for presterssed concrete(PSC) girder bridges. Firstly, a damage monitoring algorithm using global and local vibration features is designed. As global and local features, acceleration and electro-mechanical impedance features are selected respectively. Secondly, the temperature effect on the acceleration and impedance features for a lab-scaled PSC girder is experimentally analyzed. From the experimental results, compensation models for temperature-acceleration features and temperature-impedance features are estimated. Finally, the feasibility of the acceleration-impedance-based damage monitoring technique using the compensation model is evaluated in the PSC girder for which a set of prestress-loss and flexural stiffness loss cases were dynamically tested.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.12
• /
• pp.7-22
• /
• 2023

In this study, the limit range of input acceleration was investigated based on time domain and response spectrum analyses by considering the relative density, groundwater depth, and soil type. Special attention was paid to the input acceleration and shear modulus of soil, which affect pile behavior. The surrounding soil was identified as an elastoplastic material and subjected to FLAC3D analysis using the Mohr-Coulomb and Finn models as well as FB-Multiplier analysis using a nonlinear p-y curve for soil spring. Based on the analyses, the limit range of acceleration on the pile is much higher for SP soil than for SM soil, and the groundwater level tends to reduce the limit range of input acceleration, irrespective of soil conditions. The limit range of acceleration was mainly affected by the shear modulus. The limit range of acceleration with nonlinear soil behavior is proportional to the relative density of the surrounding soil.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.81-86
• /
• 2001

We have investigated surface photovoltage characteristics of InGaAs grown by metalorganic chemical vapor deposition (MOCVD) method on semi-insulating GaAs. The splitted SPV signals from the substrate and epilayer were observed. The band gap energy of InGaAs was about 1.376 eV, The In composition(x) was determined by Pan's composition formula. The photovoltage gradually decreases with increasing frequency. This is because the transfer of charge from the surface states reduces. From the temperature dependent SPV measurement, we obtained Varshni and temperature coefficients. In spectrum of etched sample at 300 K, the 'A' peak below $E_o(GaAs)$ is related with residual impurity during sample growth.

• Applied Chemistry for Engineering
• /
• v.18 no.3
• /
• pp.245-250
• /
• 2007

Adsorption characteristics of 1,2-dichlorobenzene on the surface of heat treated silica gel were determined by the moment analysis. The heat treatment of the silica gel was performed at temperatures of 150, 500, and $800^{\circ}C$ and pulse-response of 1,2-dichlorobenzene was measured in a gas chromatograph equipped with thermal conductivity detector (TCD) using the packed column. Equilibrium adsorption constants and isosteric heat of adsorption were recorded the highest value at $500^{\circ}C$. This might be due to the increase of interaction between silica surface and 1,2-dichlorobenzene as the decrease of OH concentration and moisture by increase of heating temperature. Axial dispersion coefficient calculated by the moment method was about $0.046{\times}10^{-4}{\sim}1.033{\times}10^{-4}m^2/sec$ and pore diffusivity of heat treated silica gel at $500^{\circ}C$ measured the lowest value. Because heat treating at $800^{\circ}C$ caused the specific surface area to reduce, equilibrium adsorption constants and isosteric heat of adsorption were decreased.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1A
• /
• pp.95-104
• /
• 2008

Dynamic behaviors of the two-span continuous bridge which is one of prototypes on Gyoung-Bu high-speed railway are analyzed and some methods for reducing the resonance of the bridge are proposed. The bridge is modeled as a two-span continuous beam and the load is a vehicle of TGV-K (2p+18T) with length of 380.15 meter traveling on the railway bridge at some constant velocity. The equations governing the dynamic behaviors of the bridge are partial differential equations produced by using a system with distributed mass and elasticity. The analysis of the governing equations is performed by the mode superposition method which has modal coordinates solved by Duhamel's integral. Without considering the train velocity the dynamic reponses can be greatly reduced at some special lengths of bridge. It is different from the results of simple bridges researched so far. When the dynamic responses increase rapidly to make a resonance phenomenon depending on the train velocities, the several methods are proposed to deduce the resonance.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.3
• /
• pp.163-171
• /
• 2024

Structural health monitoring for ships and offshore structures is important in various aspects. Ships and offshore structures are continuously exposed to various environmental conditions, such as waves, wind, and currents. In the event of an accident, immense economic losses, environmental pollution, and safety problems can occur, so it is necessary to detect structural damage or defects early. In this study, structural response data of multi-linked floating offshore structures under various wave load conditions was calculated by performing fluid-structure coupled analysis. Furthermore, the order reduction method with distortion base mode was applied to the structures for predicting the structural response by using the results of numerical analysis. The distortion base mode order reduction method can predict the structural response of a desired area with high accuracy, but prediction performance is affected by sensor arrangement. Optimization based on a genetic algorithm was performed to search for optimal sensor arrangement and improve the prediction performance of the distortion base mode-based reduced-order model. Consequently, a sensor arrangement that predicted the structural response with an error of about 84.0% less than the initial sensor arrangement was derived based on the root mean squared error, which is a prediction performance evaluation index. The computational cost was reduced by about 8 times compared to evaluating the prediction performance of reduced-order models for a total of 43,758 sensor arrangement combinations. and the expected performance was overturned to approximately 84.0% based on sensor placement, including the largest square root error.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.94-98
• /
• 2006

미계측 유역에 대한 정확한 수문반응을 예측하기 위해 수문반응 모의할 때 발생하는 불확실성을 예측하고 감소시킬 필요가 있다. 이러한 불확실성은 사용가능한 자료의 질과 양에 따라 달라지므로, 자료의 해상도는 수문반응 예측에서 중요한 요소가 된다. 그러므로 본 연구에서는 격자크기가 수문모형의 강우-유출응답모의에 어떠한 영향을 미치는지 살펴보았다. 격자크기가 입력데이터의 정보 손실을 발생시키지 않는 경우의 모형의 불확실성을 조사하기 위하여, 2차 및 3차 하천차수와 유역면적의 증가를 고려한 4가지 가상유역을 구성 하였다. 50m, 100m, 250m, 500m, 1000m의 격자를 사용하여 강우-유출모의를 수행하고, 격자에 따른 모의결과를 비교하기 위해 유출구의 수문곡선을 작성하였다. 또한, 소유역에서 하천으로 유입되는 단위길이당 유량과 하천의 합류점 전..후 및 유출구의 하천유량에 대한 Nash 계수를 산정하고 비교하였다. 기준이 된 격자크기와의 차가 큰 격자가 사용된 경우 모의된 수문반응의 차이는 증가하였고, 대상 유역의 면적이 커질수록, 하천차수가 작을수록 그 차이는 감소하였다. 소유역에서 하천으로 유입되는 단위폭당 유량의 오차는 흐름길이가 증가할수록 감소하였다. 흐름길이가 일정한 소유역으로만 구성된 가상유역 I, II에 대한 수문모의에서 하천유량의 오차는 하천을 따라 증가한 반면, 각기 다른 흐름길이의 소유역으로 구성된 가상유역 III, IV의 경우, 오차는 하천의 흐름에 따라 일정한 경향을 갖지 않고, 하천의 합류를 통해 증가되거나 감소하였다. 이 경우, 유역 유출구의 총체적 수문반응의 오차는 1차 하천의 합류후 발생한 최대오차보다 작았다.량을 산출하여 하천환경정비를 위한 기초자료로서 활용 될 수 있도록 하였다.구에 맞는 작물 생산 및 농촌관광단지 조성을 통해 부가가치증대 및 소득증대를 꾀함으로 농촌문제 해결에 도움이 될 것으로 기대된다. 본 연구를 통해 GIS 와 RS의 기술이 농촌분야에 더 효율적으로 적용될 것으로 기대되며, 농업기술센터를 통한 정보제공을 함으로써 대농민 서비스 및 농업기관의 위상이 제고 될 것으로 기대된다.여 전자파의 공간적인 가시화를 수행할 수 있었다. 본 전자파 시뮬레이션 기법이 실무에 이용될 경우, 일반인이 전자파의 분포에 대한 전문지식을 습득할 필요 없이, 검색하고자 하는 지역과 송전선, 전철 등 각종 전자파의 발생 공간 객체를 선택하여 실생활과 관련된 전자파 정보에 예측할 수 있어, 대민 환경정보 서비스 질의 개선측면에서 획기적인 계기를 마련할 것으로 사료된다.acid$(C_{18:3})$가 대부분을 차지하였다. 야생 돌복숭아 과육 중의 지방산 조성은 포화지방산이 16.74%, 단불포화지방산 17.51% 및 다불포화지방산이 65.73%의 함유 비율을 보였는데, 이 중 다불포화지방산인 n-6계 linoleic acid$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 지질 구성 총 지방산의 대부분을 차지하는 함유 비율을 나타내었다.했다. 하강하는 약 4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.466-474
• /
• 2007

Asymmetric networks that the downlink bandwidth is larger than the uplink bandwidth may cause the degradation of the TCP performance due to the uplink congestion. In order to solve this problem, this paper designs and implements the Dynamic Segment Size Control mechanism which offers a suitable segment size for current networks. The proposed mechanism does not require any changes in customer premises but suppress the number of ACKs using segment reassembly technique to avoid the uplink congestion. The gateway which adapted the Dynamic Segment Size Control mechanism, detects the uplink congestion condition and dynamically measures the bandwidth asymmetric ratio and the packet loss ratio. The gateway reassembles some of segments received from the server into a large segment and transmits it to the client. This reduces the number of corresponding ACKs. In this mechanism, the SACK option is used when occurs the bit error during the transmission. Based on the simulation in the GEO satellite network environment, we analyzed the performance of the Dynamic Segment Size Control mechanism.