• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1
• /
• pp.21-29
• /
• 2001

In order to detect the precise port/starboard direction of arrival of target signal in real noisy ocean environments, Inverse beamforming (IBF) algorithm is surveyed theoretically and the detection performances of IBF are analyzed with simulations. Cardioid Inverse beamforming algorithm was proposed for port/starboard discrimination and the performance was studied with simulations. It is shown that IBF has a 3dB array gain advantage over Conventional beamforming (CBF) under ideal conditions. This 3 dB advantage is proven theoretically and illustrated with simulations. The fact that the IBF beamwidth is narrower than the CBF beamwidth by a factor of 0.68 proves the performance of defection and spatial resolution improvement. Comparing the simulation results of Cardioid Inverse beamforming and Conventional Cardioid beamforming, it is shown that Cardioid Inverse beamformer has enhanced performance in minimum detection level, detection accuracy and resolution. Due to the results of moving target bearing detection test in endfire, it is shown that Cardioid Inverse beamformer has better performance, comparing the Conventional Cardioid beamformer.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.305-313
• /
• 2024

For effective bi-static sonar operation, detection performance analysis must be performed reflecting the characteristics of sound propagation due to the ocean environment and target information. However, previous studies analyzing bistatic sonar detection performance have either not considered the ocean environment and target characteristics or have been conducted using simplified approaches. Therefore, in this study, we compared and analyzed the bistatic detection performance in Yellow sea and Ulleung basin both with and without considering target characteristics. A numerical analysis model was used to derive an accurate bistatic target strength for the submarine-shaped target, and signal excess was calculated by reflecting the simulated target strength. As a result, significant changes in detection performance were observed depending on the source and receiver locations as well as the target strength.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.spc
• /
• pp.18-22
• /
• 2022

Because it is difficult to apply direct and optical detection techniques to sunken hazardous and noxious substances (HNS), effective acoustic detection techniques are required to detect sunken HNS in water. In this study, the possibility of acoustic detection of sunken HNS was investigated through backscattering signal measurement experiments using chloroform, a sunken HNS. After establishing a pool in an acrylic tank, backscattering signals were measured according to the presences or absence of chloroform by varying the grazing angle from 90° to 50° in 0.5° intervals using a pan&tilt system. A directional transducer transmitted and received sinusoidal signals with a frequency of 200 kHz and a pulse length of 25 ㎲ in a monostatic state. When chloroform was deposited, the received level of the backscattering signal at the interface between water and chloroform became low at a grazing angle of approximately 80° or smaller. Based on the backscattering signal results obtained at the interface between water and chloroform, the possibility of acoustic detection of sunken HNS was demonstrated.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.1
• /
• pp.45-52
• /
• 2016

Blast furnaces are crucial equipment for steel production. A typical furnace risks unexpected accidents caused by contraction and expansion of the walls under an environment of high temperature and pressure. In this study, an acoustic emission (AE) monitoring system was tested for evaluating the large-scale structural health of a blast furnace. Based on the growth of shell cracks with the emission of high energy levels, severe damage can be detected by monitoring increases in the AE energy parameter. Using this monitoring system, steel mill operators can establish a maintenance period, in which actual shell cracks can be verified by cross-checking the UT. From this study, we expect that AE systems permit early fault detection for structural health monitoring by establishing evaluation criteria based on the severity of shell cracking.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.297-298
• /
• 2023

해상 사고 시 지상에서 통상적으로 사용하는 빛이나 전파가 투과하지 못하는 수중에서 수중 음향을 이용해 수백 m 이상의 원거리에서 실종자나 화물의 위치를 추적하기 위해 요구되는 조건들을 분석하고 이를 실증하기 위해 인체에 부착 가능한 크기의 소형 수중 음향 송신기와 이를 찾기 위해 수색 작전에 사용하는 수신기가 제작됐다. 이를 사용해 서해 상에서 1km 거리에서 음향 신호 수신을 확인했고 실제 현장에서 적용되기 위해 필요한 개선점들을 정리했다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.222-225
• /
• 1993

일반적임 빔 형성기는 표적의 방위탐지가 가능하지만, 구조적인 특성상 대칭적인 빔을 형성하므로 표적의 좌/우 방위 구분이 불가능하기 때문에 표적의 정확한 방위를 탐지하고자 할 때 좌/우 구분이 가능한 빔 형성기가 필수적이다. 좌/우 분리 빔 형성 기법으로는 카디오이드(Cardioid) 빔 형성기법을 일반적인 빔 형성기에 적용시키는 방법이 최적으로 알려져 왔다. 그러나 좌/우 분리 빔을 형성하기 위해서는 많은 연산량과 하드웨어 설계에 대한 고려가 있어야한다. 본 논문에서는 좌/우 분리 빔 형성을 위하여 주파수 빔 형성기법과 카디오이드 빔 형성기법을 합성하여 적용하였다. 주파수 빔 형성 기법은 짧은 수행시간 동안에 표적의 정보추출을 위하여 고려되었으며, 카디오이드 빔 형성기법은 3개의 센서를 이용하여 센서의 기울기를 보상하여 수행하는 기법을 적용하였다. 또한 방향성 있는 시뮬레이션 신호를 생성하여 좌/우 분리 빔 형성 시뮬레이션을 수행하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.177-180
• /
• 2000

소나 시스템에서는 신호 대 잡음비의 향상, 표적의 방위탐지 및 위치 데이터 산출, 간섭신호 제거 등을 위하여 지향성 빔을 만들어 사용한다. 본 논문에서는 선형으로 배열된 센서에서 각 센서쌍들에 대한 상호상관 행렬을 이용한 SCCBF(Spatial Cross Correlation Beamformer) 알고리즘을 제안하였다 이상적인 조건하에서 제안된 SCCBF는 CBF(Conventional Beamformer)에 비해 3dB의 Array Gain을 갖는 것을 이론적으로 검증하고 표적의 탐지 방위정확도를 나타내는 빔폭(Beam Width)이 CBF 보다 0.5배정도가 됨을 검증하고 모의실험을 통하여 이를 입증하였다.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.84-89
• /
• 2003

Water leak is one of topics with great concern in Korea and many other countries, because of decreasing water supplies and the deterioration of old pipeworks. Correlation techniques have been widely used in leak detection of water pipes, which allow to locate a leak point based on the correlation of leak noise at two sites along water pipes. In this study, both the cross-correlation method and the conventional arrival time difference method are applied in order to analyze and to locate a leak point of a water pipe. In experiment, a 150 m of whole length waterwork pipeline system was constructed in a ground, and several types of leak noise were installed on the pipeline in order to control leak condition. Both the cross-correlation technique and the arrival time difference method showed favorable results at leak detection with the experimental pipeline system.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.2
• /
• pp.139-145
• /
• 2014

In this paper, a feature parameter is obtained by applying the Teager energy to the WPD(Wavelet Packet Decomposition) coefficients. The threshold value is obtained based on means and standard deviations of nonspeech frames. Experimental results by using TIMIT speech and NOISEX-92 noise databases show that the proposed algorithm is superior to the typical VAD algorithm. The ROC(Receiver Operating Characteristics) curves are used to compare performance of VAD's for SNR values of ranging from 10 to -10 dB.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1961-1963
• /
• 2003

수중에는 대기중에서와는 달리 음향, 압력, 전자기장 등이 주 탐지원이 된다. 이중 선체에서 발생되는 전자기장은 강자성체로부터 발생되는 정 자기장 이외에 선체 자체의 부식과 부식 방지 장치에서 발생되는 정전 자기장 및 ELFE대역의 교류 전 자기장으로 나눌수가 있다. 이처럼 수중에서 탐지 가능한 비음향 전자기 신호원이 교류 전자기장 등으로 다양화됨에 따라 선체 건조시 이러한 신호 발생원들의 종합적인 관리 및 감소 대책이 요구된다. 따라서, 본 논문에서는 선체에서 발생되는 전자기장 신호원의 종류와 발생원인을 기술하고, 이러한 신호원들을 감소시키기 위한 대책을 소개하였다.