• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.11a
• /
• pp.8-10
• /
• 2017

지상파 UHD 방송은 시청자에게 기존 HD 방송화면보다 4배 더 선명한 영상 서비스를 제공하며, 광대역 통신망과 결합한 홈포탈(Home Portal) 서비스를 통해서 다양한 부가서비스를 지상파 방송과 함께 제공할 수 있다. 본 논문에서는 지상파 UHD TV 방송과 연계된 360도 가상현실(VR; Virtual Reality) 부가서비스 시스템과 이를 효과적으로 시청하기 위한 사용자환경을 제안한다. 방송의 ESG(Electronic Service Guide)를 통해 시청자는 VR 부가서비스임을 확인하고 스마트 단말기 또는 HMD(Head Mount Display) 등을 이용하여 마치 현장에 있는 듯한 체험을 즐길 수 있다. 제안한 부가서비스는 앱 형태로 스마트 단말기에 설치하여 실행하며 지상파 UHD TV의 ESG 정보로부터 프로그램 편성과 VR 지원여부를 확인한다. 이를 통해, 실시간 방송 뿐 아니라 VOD 형태로 제공되는 다양한 비디오 및 오디오 콘텐츠를 극장에서 보는 것과 같은 빅스크린 모드, 360도 VR 모드, 오디오 청취모드 등 다양한 시청환경에서 감상할 수 있다. 제안한 사용자 환경은 게임엔진을 기반으로 개발되어 가상의 시청 공간에서 장소를 이동하며 영상, 음향 등 미디어 콘텐츠를 감상할 수 있다. 전용컨트롤러를 이용하면 다양한 인터액티브 콘텐츠를 효과적으로 운용하여 감상할 수 있으며, 일반적으로 통용되는 VR 기기 제어 모드도 지원하여 HMD나 일반 스마트 단말기 어느 것을 이용해서도 용이하게 사용자 메뉴를 선택할 수 있다. 제안된 시스템의 시제품은 IBC 2017 및 평창 ICT 체험관을 통해 발표되었다.

• Journal of the Korea Furniture Society
• /
• v.11 no.1
• /
• pp.45-51
• /
• 2000

It was thought that the stiffness of a coated specimen became lower than that of the solid wood because the stiffness of the dried film of coating material is lower than that of the solid wood. The authors were trying to compare the effect of lacquer varnish and rhus lacquer on the resonant frequency of the solid woods for the violin, spruce and maple. Vibration modal shape of coated specimens were same to those of solid woods, but the frequency became lower at each mode as were expected regardless of coat. frequency decrement of coated specimen was getting larger at upper mode in both European violin woods, however, rhus lacquer coated spruce specimens were less affected than lacquer varnish coated specimens.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.4
• /
• pp.25-32
• /
• 2020

A numerical study on combustion instabilities in a model combustor was conducted with various momentum flux ratios. Five ratios are calculated based on an actual operating condition of rocket engine. As momentum flux ratio increases, the spreading angle on the injector outlet decreases. And, as increase of axial momentum flux, pressure fluctuation decreases inside the combustor. By using dynamic mode decomposition method, the acoustic modes inside the combustor are identified. Combustion stabilities are analyzed by comparing the damping coefficient of the 2^nd longitudinal mode.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.79-87
• /
• 2003

Application of combustion stabilization devices such as baffle and acoustic cavity to liquid propellant rocket engine is investigated to suppress high-frequency combustion instability, i.e., acoustic instability. First, these damping devices are designed based on linear damping theory. As a principal design parameter， damping factor is considered and calculated numerically in the chambers with/without these devices. Next, the unbaffled chambers with/without acoustic cavities are tested experimentally for several operating conditions. The unbaffled chamber shows the peculiar stability characteristics depending on the operating condition and it is found to have small dynamic stability margin. As a result, the acoustic cavity with the present design has little stabilization effect in this specific chamber. Finally， stability rating tests are conducted with the baffled chamber, where evident combustion stabilization is observed, which indicates sufficient damping effect.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.7-13
• /
• 2013

The surface microcrack over a few tens of micrometers is one of severe problems of a steel wire rod to lead to the failure of the final products, so the method to evaluate crack depth has been required to develop. This work investigates the feasibility of electromagnetic acoustic resonance (EMAR) for this problem. EMAR is the method for measurement of resonant features using electromagnetic acoustic transducer (EMAT). Generally, EMAR is sensitive to small variation of the structures and easy to apply it to the industrial field because of the feature of noncontact measurement. Through several EMAR experiments, the change of the resonant frequencies and attenuation in reverberation has been observed. The results confirms that the surface cracks of around 100 micrometer depth can be detected successfully with the present method.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.101-108
• /
• 2001

In this paper we focus on dynamic reservation slot allocation scheme for supporting QoS of a voice traffic in WATM MAC. Especially, voice traffic is the most important real-time object, and so we propose a new MAC protocol for voice traffic over WATM networks in the multimedia environment. According to the characteristics of voice traffic which is repeatedly in silent state and active state, new protocol allocates reservation slots dynamically with respect to the number of silent voice source of which starting time is stored to the state table in base station (BS). The simulation results show that the proposed protocol has better performance than slotted ALOHA in average access delay, collision rate, better than NC-PRMA(Non Collision Packet Reservation Multiple Access) in band width efficiency, and can provide a certain level of QoS requirement by the given slot assignment even though the number of voice terminals is increased.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.83-88
• /
• 2001

In this paper, matched field processing algorithm robust to environmental mismatches in an ocean waveguide based on feature extraction is summarized. However, in applying this processor to localize a source there are two preliminary issues to be resolved. One is the number of eigenvectors to be extracted and the other is the number of environmental samples to be used. To determine these issues, the relation between the number of dominant modes propagating in a given ocean waveguide and that of eigenvectors to be extracted is analyzed. Then, the analysis results are confirmed by the subspace analysis. This analysis quantifies the similarity between the subspace spanned by the signal vectors and that spanned by the eigenvectors to be extracted. The error index is defined as a relative difference between the location estimated by the current processor and the real source location. It is identified that in the case of extracting the largest eigenvectors equal to the number of dominant modes in a given environment, the processor localizes the source successfully. From the numerical simulations, it is shown that use of at least 30 environmental samples guarantee stable performance of the proposed processor.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.8
• /
• pp.514-522
• /
• 2012

The temperature dependence of the characteristics in a PZT-5 piezoelectric ceramic vibrator with the transverse mode was investigated in the range of $-100^{\circ}C$ to $90^{\circ}C$ using a thermal vacuum chamber to utilize the vibrator in aerospace industries. As the results, at room temperature, the resonant and anti-resonant frequencies had the minimum value, whereas, the dielectric constant increased linearly from about 2500 to 7500 in the given temperature range. The mechanical loss decreased linearly from 0.08 to 0.03. Through the regression analysis, the temperature dependence functions of the characteristics were derived to linear and square regression functions. Applying the functions, the input admittance characteristics of the piezoelectric vibrator were calculated, and the results showed good agreement with measured ones. It can be confirmed that this method is useful to estimate the characteristics change of the piezoelectric vibrator caused by the temperature change under the space environment.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.276-283
• /
• 2018

The purpose of the study is to identify a sound generating organ that has a major influence on the central frequency of the cicadas with the Helmholtz resonator structure for the first time. The sound of cicadas Cryptotympana atrata and Hyalessa fuscata were recorded and analyzed, then the motion of the tymbals was analyzed with a high-speed camera to compare the relationship between the frequency of sound and the motion of the tymbals. As a result, there was little difference in the frequency distribution of calling song and scream for two species. The tymbals of C. atrata oscillated in three vibration modes, while those of H. fuscata oscillated in one mode. There was no difference in the frequency of both tymbals of both cicadas, and three vibration modes of C. atrata generated sound with different frequency bands. The frequency band of tymbals and the central frequency band of calling song were very similar. In conclusion, it is presumed that the frequency of the cicadas with the Helmholtz resonator structure was determined by mode frequency of the tymbals than resonance condition of the abdomen.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.270-277
• /
• 2021

In the power ultrasound fields, the flange position for fixing the transducer is an important factor influencing on electro-mechanical efficiency of the transducer. We suggested a practical method that can determine the installation position of the flange for different resonance modes of the bolt-clamped type Langevin ultrasonic transducer. A semicircular wedge-shaped jig was manufactured and moved along the lateral surface of the transducer. The vibration characteristics were examined after a constant pressure was applied to the semicircular wedge-shaped jig. By observing the change of the input admittance of the transducer depending on the position of the pressure application, the optimum position for the flange installation could be determined. The resonant modes of the transducer were calculated by a Mason's equivalent circuit, and the particle velocity distribution for each resonance mode was calculated by a transmission line model. Since the optimum positions determined from an experimental result show a good correspondence with the node positions of the vibration modes calculated by the transmission line model, the validity of the suggested method was verified.