• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.85-88
• /
• 1998

심리음향학적으로 소리의 감성 요소를 평가하려는 시도가 계속되고 있으나 뚜렷한 결과가 나온 것은 많지 않다. 또한 감성 인자 평가에 대한 국제적인 표준도 정확히 나와있지 않다. 일반적으로 심리음향학 인자로 loudness, sharpness, roughness, fluctuation strength, pleasantness, annoyance를 사용하며, 이러한 인자들을 이용하여 바이노럴 음질 평가 시스템을 구현하였다. 구현된 바이노럴 음질 평가 시스템의 객관성을 평가하기 위해 인성 실험을 실시하였고 인성 실험 결과와 음질 평가 시스템을 이용한 평가 결과를 비교 분석하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.3
• /
• pp.189-202
• /
• 2023

In this study, the acoustic performance was analyzed by architectural shapes of the hall. There are four architectural shapes of halls. They are rectangular, horseshoe, surround, and fan-shape. Eight acoustic parameters were used to determine the acoustic performance. These are RT₆₀, EDT, C₈₀, BQI, LF, G_mid, G₁₂₅ and ITDG. First, measurement data of famous concert halls around the world were analyzed. The correlation coefficient R was obtained by regression analysis of the relationship between the subjective ranking of the halls and the acoustic parameters. It was found that BQI, G, and ITDG have higher correlation coefficients R. Also the average of acoustic parameters for each architectural shape were obtained. The total acoustic performance for each shape was calculated by using the correlation coefficient R as a weight for each acoustic parameters. As a result, rectangular halls and horseshoe halls showed good acoustical performances. Second, 3D models of each architectural shape were created and acoustic simulation had been performed. The simulation was performed by creating 3D models of each four shapes of concert halls with the same volume and sound absorption coefficient. Listening test was carried out using the sound source which is created from impulse responses of 3D model. As a result, rectangular hall and horseshoe hall showed the best performance however surround hall and fan-shaped hall showed relatively poor performance.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.2
• /
• pp.1-7
• /
• 2008

Effect of radial position of half-wave resonator is investigated experimentally for acoustic damping in a combustion chamber by adopting acoustic cold test. Acoustic damping is quantified by damping factor. When resonator with optimal tuning length is installed, damping is enhanced as its radial location is away from the center of the faceplate. And, spatial profile of damping factor is similar to that of the amplitude of the acoustic mode to be damped. As the location is close to the center, acoustic damping is mitigated and independent of the resonator length. On the other hand, the resonator with non-optimal length dose not show any effects of its radial position. Acoustic-damping capacity can be evaluated as functions of resonator length and position.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.557-560
• /
• 2004

본 논문에서는 실내음향을 측정하기 위해 사용되는 음향 측정 신호인 blank pistol, maximum length sequence, sine sweep 을 이용한 충격응답 특성을 분석한다. 각 충격응답의 실내음향 인자들을 먼저 비교 분석하고 sine sweep 속도에 따른 충격응답 특성을 분석하여 최적의 실내음향 인자를 찾기 위한 sine sweep 속도를 결정한다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.69-74
• /
• 1998

본 논문은 건축실내표면의 확산성이 실내음향에 미치는 영향의 범위와 그 정도를 알기 위하여 가상의 홀을 시뮬레이션하여 확산성의 차이에 따른 실내음향인자의 변화를 분석하였다. RT, EDT, C80 등의 음향인자의 분석을 통하여 실내의 확산성이 초기 음에너지의 증가와 확산에 큰 영향을 미치고 있으며, 특히, 천장보다는 벽체의 확산명이 명료도의 증가와 음이해도의 상승에 기여하는 것으로 나타났다.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.1
• /
• pp.1-6
• /
• 2006

The Possibility of using acoustic impedance as an input Parameter for computation of underwater acoustic field in shallow waters was investigated. Analysis of the acoustic reflection from the ocean bottom with shear wave effect showed that acoustic impedances below the critical grazing angle have nearly angle-independent property and could be approximated with a single value of near-grazing impedance $Z_0$. Computations of the Propagation loss based on the concept of 'effective depth' indicate that near-grazing bottom acoustic impedances could be used as an input parameter for simulation of the acoustic fields in shallow waters.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.202-207
• /
• 1995

BAZOOKA SPEAKER에 대한 음향특성연구와 중저음 특성강화를 위한 설계인자 변경해석을 위하여 유한요소법과 경계요소법을 사용한 수치해석을 수행하였고, 그 해석결과의 검증과 흡음물성치 산출을 위하여 음향측정실험, 구조물의 동특성실험등을 실시하였다. 연구결과, 내부공간의 음향모드특성, 외부음장에서의 주파수응답특성, 방사패턴, 그리고 음압의 공간 분포특성과 구조물의 동특성을 명확히 규명하였고, 각 음향설계인자 변경에 따른 음향특성을 예측하여 중저음특성강화를 위한 방안을 수립하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.28-37
• /
• 2002

Acoustic behavior in combustion chamber with acoustoc cavity is numerically investigated by adopting linear acoustic analysis. Helmholtz-type resonator is employed as a cavity model to suppress acoustic instability passively. The tuning frequency of acoustic cavity is adjusted by varying the sound speed in acoustic cavity. Through harmonic analysis, acoustic pressure responses of chamber to acoustic oscillating excitation are shown and the resonant acoustic modes are identified. Acoustic damping effect of acoustic cavity is quantified by damping factor. As the tuning frequency approaches the target frequency of the resonant mode to be suppressed, mode split from the original resonant mode to lower and upper modes appears and thereby damping effect is degraded significantly. Considering mode split and damping effect as a function of tuning frequency, it is desirable to make acoustic cavity tuned to maximum frequency of those of the possible splitted upper modes.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.17-20
• /
• 2007

Effect of radial position of half-wave resonator is investigated experimentally for acoustic damping of tangential mode in a combustion chamber by adopting acoustic cold test. When resonator with optimal tuning length is installed， damping is enhanced as its radial location is away from the center of the faceplate. And, radial profile of damping factor is similar to that of the amplitude of the acoustic mode to be damped. As the location is close to the center, acoustic damping is mitigated and independent on the resonator length. on the other hand， the resonator with non-optimal length dose not show any effect of its radial position.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.3
• /
• pp.283-289
• /
• 2019

RLS (Recursive-least-squares) algorithm is known to have good convergence and excellent error level after convergence. However, there is a disadvantage that numerical instability is included in the algorithm due to inverse matrix calculation. In this paper, we propose an algorithm with no matrix inversion to avoid the instability aforementioned. The proposed algorithm still keeps the same convergence performance. In the proposed algorithm, we adopt an averaged gradient-based step size as a self-adjusted step size. In addition, a variable forgetting factor is introduced to provide superior performance for time-varying channel estimation. Through simulations, we compare performance with conventional RLS and show its equivalency. It also shows the merit of the variable forgetting factor in time-varying channels.