• 비파괴검사학회지
• /
• 제23권3호
• /
• pp.237-245
• /
• 2003

이방성 복합재료 적층판에서는 섬유의 배열방향에 따라 탄성계수가 변하므로 속도가 섬유의 방향성에 의존하게 된다. 등방성 속도를 기준으로 도달 시간차를 측정하는 전통적인 2차원 음향방출 위치표정 방법을 그대로 적용할 경우 위치표정의 오차가 매우 커지며, 그 과정이 복잡해지는 것을 피할 수 없다. 본 연구에서는 위치표정의 대상이 되는 관심영역(ROI)를 마치 유한요소법에서 사용하는 메쉬(mesh)처럼 적절한 크기의 정사각형 요소로 나눈 뒤, 각각을 가상의 AE 발생원으로 간주하였으며, 모든 요소에 대해 이방성을 고려한 속도를 기준으로 각 센서와의 도달시간차를 구하였다. 실험적인 검증을 위하여 알루미늄 박판 및 복합재료 적층판에 대해 $0^{\circ}$ 부터 $90^{\circ}$까지의 속도를 측정하고 위치표정을 실시함으로써 이방성 적층복합재로 이루어진 실제 구조물에서의 실시간 활용가능성을 확인하였다.

• 한국터널지하공간학회 논문집
• /
• 제24권1호
• /
• pp.39-55
• /
• 2022

본 연구는 경주 중·저준위 지하 처분환경에서의 사일로 콘크리트의 음향방출(AE) 신호 감쇠계수(α)를 결정하기 위해 신호감쇠 실험을 수행하였다. 활용된 시료들은 경주 중·저준위 처분장 사일로에 사용된 콘크리트 배합비로 제작하였으며 28일간 수중 양생 후 처분환경에 맞도록 온도 및 포화유무에 따라 추가적으로 노출시켰다. 처분조건 별 각 3개씩의 공시체에 대하여 신호전달거리에 따른 AE 신호를 측정한 결과, 초기구간에서는 포화콘크리트의 AE 진폭과 절대에너지가 건조콘크리트의 경우보다 더 높게 나타났지만, α는 포화콘크리트의 경우가 더 높게 산정되었다. 또한, 포화유무와 상관없이 온도가 증가함에 따라 α는 감소하는 경향을 보였다. α는 온도조건보다는 포화유무에 따른 영향이 큰 것으로 분석되었으며, 이는 콘크리트 처분구조물의 감쇠신호 측정 시 포화여부를 고려한 판단이 중요하다는 것을 의미한다. 처분환경에서의 콘크리트 α는 균열이 발생한 위치에서의 실제 AE 특성 파라미터 값을 추정함으로써 경주 중·저준위 처분환경에서 사일로 콘크리트의 건전성을 예측하고 센서의 최적 배치를 결정하는 데 도움이 될 것으로 기대한다.

• 비파괴검사학회지
• /
• 제16권1호
• /
• pp.34-45
• /
• 1996

음향 방출 신호의 수집 및 처리, 특징값 추출 및 선택, 분류기 설계 및 검증 과정 등을 수행할 수 있는 신호 형상 인식 프로그램을 개발하고, 이를 오스테나이트계 STS304 용접부의 인공 결함 분류 연구에 적용하였다. 특히 분류기로는 선형 함수 분류기, 경험적 Bayesian 분류기, 신경 회로망 분류기를 사용하였고, 센서는 광대역 센서와 공진형 센서를 사용하여 분류기간의 비교와 센서간의 차이점을 검토하였다. 그 결과 신경 회로망 분류기가 다른 분류기에 비해 높은 인식률을 주었고, 공진형 센서보다는 광대역 센서를 통해 받은 신호가 더 높은 인식률을 주었다.

• 비파괴검사학회지
• /
• 제12권4호
• /
• pp.9-17
• /
• 1993

Three types of piezoelectric sensors to detect acoustic emission signals were developed and characterized. Epicentral displacement and velocity of a plate to have infinite boundary were calculated by convolution between a Green's function and a simulated source time function to show parabolic rising characteristic. The sensor calibration system set up was composed of a steel plate, a glass capillary, an indentor and a load cell indicator The transient elastic signals were detected by the sensors. The results were compared with the theoretical results and Fast Fourier Transformed. As the results, the sensor fabricated using a disk shape of a piezoelectric PZT element showed resonant characteristics. The sensors fabricated using a conical shape PZT element and a PVDF polymer film showed the wide band characteristics for particle displacement and velocity, respectively. The calculated results showed good agreements with the transient responses in the cases of the wide band sensors and it was confirmed that the simulated source time function had been properly assumed.

• 한국전기전자재료학회논문지
• /
• 제23권5호
• /
• pp.383-387
• /
• 2010

The response characteristics of AE (acoustic emission) sensors with a coupled vibration mode and a non-coupled vibration mode were investigated according to PD(partial discharge) quantities in XLPE (cross linked polyethylene) sheets and craft papers immersed in insulating oil. The response voltages of a coupled vibration mode AE sensor were linearly proportional to the PD quantities up to 1,000 pC in XLPE sheets, while a non-coupled vibration mode AE sensor did not show the similar linearity. In case of a test of craft papers immersed in insulating oil, a linearity between response voltages and PD quantities was observed up to 550 pC, but after that, similar linearity between response voltage of any types of AE sensor and PD quantities was not shown.

• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.114-118
• /
• 2013

In this study, coupled mode piezoelectric devices for AE sensor application with excellent displacement and piezoelectric characteristics were simulated using ATILA FEM program, and then fabricated. Displacements and electromechanical coupling factors of the piezoelectric devices were investigated. The simulation results showed that excellent displacement and electromechanical coupling factor were obtained when the ratio of diameter/thickness was 1.0. The piezoelectric device of ${\Phi}/T$= 1.0 exhibited the optimum values of fr= 406 kHz, displacement= $6.11{\times}10^{-8}[m]$, $k_{eff}$= 0.648. The results show that the coupled vibration mode piezoelectric device is a promising candidate for the application of AE sensor piezoelectric device.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.1022-1027
• /
• 1997

The grinding operation is an important machining process for machining of final surface. However. grinding process has inevitable troubles such as loading and glazing for grinding wheel. It is, therefore, an essential research theme to determine the wheel life and the dressing timefor efficient grinding. In this study, AE signals (AEavg) generated in thc grinding operation were measured and the dressing time was determined from the analysis of the AEavg value. To verify the propriety of the obtained result. the AE signals measured on the grinding and the dressing operation were compared with the grinding force signals and the dressing force which were measured at same time. From the obtained result, it was confirmed that the determination of the wheel life and the dressing time by the AE measurement technique proposed in this study can be practically used.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.987-990
• /
• 2000

In modern manufacturing industry such as aerospace, vehicle and die/mold industry, the high hardness malarial which is remarkable in aspects of durability is effectively used. The high-speed and precision machining technology has been applied in these fields. In this study, efficient sensors in high-speed machining by observing similar tendency through comparing cutting force with AE signal, gap sensor signal and accelerometer signal are selected, and machinability of high-speed machining is experimentally evaluated. We performed a basic research for sensing system construction to monitor a machine tool and machining condition.

• 한국기계가공학회지
• /
• 제3권3호
• /
• pp.32-38
• /
• 2004

Recently, the system of high speed milling(HSM) is widely used for reducing the operation time and maximizing efficiency of work. The most research of high speed milling system is still leaves much to be desired. Specially the research of mass pocket high speed processing with high precision is the first and probably the last. So this paper showed mass pocket processing of high precision with a duralumin and then confirmed a cause of inferior goods through the CAD/CAM pattern simulation and experimentation. And this paper showed high speed processing system reduce the rate of inferior from this optimal pattern.

• 한국정밀공학회지
• /
• 제26권9호
• /
• pp.53-57
• /
• 2009

There are technical requirements to manufacture large size functional parts with not only simple geometries like a flat or spherical surface but also sculptured geometries. In addition, the required machining accuracy for these parts is becoming more severe. In general, the form accuracy of machined parts is determined by the relative position between workpiece and tool during machining process. To improve machining accuracy the relative position errors should be maintained within the required accuracy. This study deals with the estimation and calibration of depth of cut using the AE signal in micro-machining. Also, this sensing technique can be applied to detect the initial contact between workpiece and tool.