• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.257-260
• /
• 1999

본 연구에서는 압전형 쇄석기에 의한 충격파 조사시에 초점위치 및 파쇄정도에 따른 파쇄대상물의 진동과 그 때 들려오는 방사음과의 관계에 대하여 검토해 본 시뮬레이션 결과를 제시한다. 아울러 동일한 실험을 파쇄가능한 대상물에 시행하여 진동과 파쇄효율과의 관계에 대해서도 실험적으로 검토한다. 최종적으로 압전형 쇄석기로 충격파를 대상물에 조사할 때, 충격시의 방사음과 대상물의 진동 및 그것에 따른 파쇄효율의 전체적인 상관성에 대하여 고찰한다.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.2
• /
• pp.91-96
• /
• 2010

To improve the limit of efficiency of squeezing oil in a conventional method, which seeds are compressed simply, the adoptability of the additional energy by the ultrasonic wave was investigated experimentally. As the results, using the ultrasonic vibration from the Langevin-type transducer, the efficiency was increased up to 25 %, whereas the conventional method has 15% efficiency. To investigate the additional pressure by the ultrasonic wave, the acoustic impedance of the sample and the vibration velocity of the transducer were measured. Although the amplitude of the ultrasonic is about 2.8 % of the compression pressure, the efficiency is increased a lot as mentioned above because the pressure is changed according to ultrasonic period.

• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.457-466
• /
• 1997

The experimental and analytical study was conducted to determine the noise transmission characteristics of acoustically loaded steel plate of rectangular enclosure and to investigate the sound radiation characteristics through out the enclosure. The vibrations of acoustically loaded plate give rise to sound radiations and generate the reverberant space that the sound field exists very close to a vibrating plate. Acoustic transmission loss is measured from the incident intensity into the plate and the transmitted intensity through out the plate. Sound radiation patterns are measured from both acoustic intensity technique and surface intensity technique. Those resultant patterns and vibrational modes are vital in understanding the relations between vibration and noise in the near field out of vibrating plate.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.2
• /
• pp.83-93
• /
• 2023

Trapezoidal corrugated plates are often treated as orthotropic plates to simplify the modelling of the corrugation. However, this simplification is not valid at high frequencies in which the localized vibration within the parts of corrugation takes place. In this study, the vibrational and acoustical characteristics of corrugated plates are investigated up to high frequencies by means of the wavenumber domain numerical approach. Based on the findings from this numerical analysis, an approximate method to predict vibro-acoustic characteristics of corrugated plates is proposed. This approximate model consists of four equivalent plates which can represent global and local behaviours of corrugated plates. The radiation efficiency of corrugated plates is predicted from the approximate model and validated through the comparison with those of the numerical method.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.5
• /
• pp.388-394
• /
• 2023

When the vibration of the thin panel by exciting single point is used to radiate sound, the inherent vibration characteristic of the plate itself causes influence on the radiated sound. A conventional panel speaker system usually uses the single or double point excitations for generating the sound through the panel itself. The radiated sound can be easily distorted due to the modal characteristics of the plate so it is difficult to expect sufficient sound power or high radiation efficiency. In this paper, to achieve an immersive sound field, the multiple speaker zones on a thin panel are created with the limited number of actuators. The designated vibration field which can generates directional sound is realized by employing the vibro-acoustic inverse rendering methods. Actuators are arranged from the positions which have the advantage of implementing with multi-modal excitations. The location and number of actuators are compared with the location and number of controllable speaker zones by conducting numerical simulations.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.1
• /
• pp.1-6
• /
• 2023

Sound radiated from a structure in vibration is an important physical characteristic to evaluate vibro-acoustic problem. Although sound radiation power can be typically obtained by intensity measurement, long measuring time and strict measuring condition remain difficult. As an alternative method, simulation-based estimation can be taken into account and its accuracy is known to be acceptable. However, difficulty still lies in that specialized softwares may be necessary to obtain sound radiation power and radiation efficiency. In this context, this study suggests two methods using an ordinary FE method to calculate sound radiation power. They are well-known reciprocity technique and p-p method, which are basically test methods. It is shown that either method can practically estimate sound radiation in the frame of conventional Finite Element Method (FEM). The methods and their corresponding limit are discussed with some results.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.5
• /
• pp.84-90
• /
• 2000

The bearing detection of radiated target noise is very important at underwater acoustic measurement and passive detection. It differs the arrival tines of received signal at each sensor. Therefore, the bearing can be obtained from the time delay. This paper proposes a new algorithm using the RLSL adaptive filter for TDE. The proposed method is particularly attractive when there is a limitation of priori information about the received signal spectra and when the delay is subject to variation. As the simulation results, it is shown that the proposed algorithm has better convergence characteristics and TDE speed, and so that the usefulness of proposed algorithm is confirmed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.236-239
• /
• 2014

Most naval underwater weapon system can be simplified to a circular cylindrical structure which has vibrating machineries inside. In order to predict efficiently the total acoustic radiation power of cylindrical structure, surface velocity is measured and radiation efficiency of surface element is calculated. Then, they are substituted to the surface pressure in the simplified Helmholtz integral equation which assumes acoustic far-field and plane-wave approximation at the surface. Surface velocity and total acoustic radiation power for a submerged cylinder are measured in water-tank. In this example, it is found that total acoustic power output obtained from the prediction is in good agreement with that of measurement in mid-high frequency range.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.207-210
• /
• 2004

단판의 차음 성능 해석에 있어서 무한판과 유한판의 가장 큰 음향학적 차이는 유한한 경계에 의해 발생하는 정재파에 있다고 할 수 있다. 하지만, 일치 주파수 이하에서는 진동 공진이 발생하더라도 음향방사효율이 비교적 작고, 따라서, 비록 그 진동 응답이 크더라도 절대적인 음향 방사 양은 작다. 이를 근거로 대부분의 유한판 해석은 비공진 성분에 국한되어 왔으나, 특정 경우 공진 투과 성분을 무시하면 해석 결과에 오차가 발생할 수 있음이 제시된 바 있다. 본 연구에서는 유한 단판의 차음 해석에 있어서 공진 투과 성분의 상대적 기여도를 수치적 해석을 통해 알아보고, 이로부터 공진 투과 성분이 해석치와 측정치 사이의 정량적 상관도에 미치는 영향을 분석하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.2
• /
• pp.158-163
• /
• 2012

Recently, reducing underwater radiated noise (URN) of ships has become an environmental issue to protect marine wildlife. URN of ships can be predicted by various methods considering its generating mechanism and frequency ranges. For URN prediction due to ship structural vibration in low frequency range, the fluid-structure interaction analysis technique based on finite element and boundary element methods (FE/BEM) is regarded as an useful technique. In this paper, URN due to a double bottom-shaped structure vibration has been numerically investigated based on a coupled method of FE/BEM to enhance the prediction accuracy of URN due to the vibration of real ship engine room structure. Acoustic radiation efficiency and URN transfer function in case of vertical harmonic excitation on the top plate of double bottom structure have been evaluated. Using the results, the validity of an existing empirical formula for acoustic radiation efficiency estimation and a simple URN transfer function, which are usually adopted for URN assessment in initial design stage, is discussed.