• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.553-558
• /
• 2015

교량의 주탑, 초고층빌딩과 같이 세장비가 큰 대형구조물의 경우 풍하중에 취약한 특성을 지니고 있어서 바람에 의해 직각 방향으로 발산 진동하는 갤로핑(galloping) 현상이 발생하게 된다. 구조물의 진동을 억제하려는 방안으로 단면 형상에 변화를 주어 공기역학적 불안정성을 감소시키는 방법이 사용되고 있다. 본 논문에서는 Edison_CFD를 이용하여 모서리 절단부의 비율과 받음각에 따른 공기력 특성에 대한 전산해석을 수행하였다.

• Journal of Aerospace System Engineering
• /
• v.3 no.2
• /
• pp.1-11
• /
• 2009

A structural modelling for study on dynamic characteristics of tapered composite aircraft wings in the form of thin-walled beam is presented. The proposed structural model includes effects of transverse shear flexibility exhibited by the advanced composite materials and warping restraint characterizing elastic anisotropy and induced structural couplings. The complex effects of these factors could have a role in more efficient analysis on those structural models.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.21-21
• /
• 1998

추력방향 제어시스템 설계에 있어서 가장 기본적으로 요구되는 Requirement는 Rocket Motor의 추력, 요구되는 최대 Side Force, Rocket Motor의 외경, System의 총 구동시간, 구동후의 분리여부 등이다. 이러한 Requirement를 만족하기 위해서는 Nozzle 출구의 분출가스 물성치로부터 초음속 유동해석을 통하여 Vane 주위의 속도, 온도, 압력 분포를 구하고, Vane의 받음각 변화에 대한 Aerodynamic Force와 Moment를 계산하고, Side Force를 만족하는 최대 받음각의 결정, Torque를 만족하는 감속기와 Motor의 선정 및 Housing 기본 형상을 설계하였다. 금번 개발에서는 지상 시험용으로서 안전 계수를 Flight Model보다 약간 높게 설계하였으며, 작동 완료 후 System이 Nozzle로부터 떨어져나가는 분리시스템은 포함하지 않았다.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.614-618
• /
• 2016

본 논문은 EDISON_CFD를 활용하여 화성에서 운용 가능한 풍력터빈에 대해 실험 및 개선 설계하였다. 본 연구에서는 화성의 중력 및 공기밀도 등 화성의 환경 데이터를 적용함으로써 풍력터빈의 형상을 새롭게 설계 하였다. 개선 설계는 기존의 풍력발전기 형상을 변형시키며 해석을 진행하였으며, 받음각과 형상에 따라 생성되는 토크를 확인하였다. 개선설계한 풍력터빈 모델은 단위 미터 당 약 8 W의 전력생산이 가능한 것을 확인하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.40-51
• /
• 1999

This paper reviews the combat survivability and supermaneuverbility which are principal factors in current and future high performance combat aircraft design. First of all, the fighter agility evaluation factors were presented. And then, emphasis was put on technologies associated with supermaneuverbility, such as vortex lift, high angle of attack aerodynamics, thrust vectoring and control system technologies that integrate each technology. The advanced nations' supermaneuverbility R/D programs were introduced as well.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.5
• /
• pp.60-65
• /
• 2011

The development of an air data acquisition algorithm has been described in the supersonic flow at the preliminary design stage with pressure data acquisition device composed of major three total pressure sensors and two static pressure sensors which are installed on the surface of a cone type supersonic inlet. Through this algorithm, Mach number, angle of attack and sideslip angle can be very easily derived with simple interpolation algorithm and predefined data tables. The available range of Mach number is 1.6 to 4.0, angle of attack, $-12^{\circ}$ to $12^{\circ}$ and sideslip angle, $-12^{\circ}$ to $12^{\circ}$. In preliminary design stage, the data tables applied to the developed algorithm are constructed with data driven by Taylor Maccoll equation. The present algorithm would be useful to get supersonic flow air data for the various aerial vehicles and their flight tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.10
• /
• pp.817-824
• /
• 2017

This paper presents the characteristics of wing-tail interference for a tail-controlled missile. The magnitude of wing-tail interference was calculated with wind tunnel test results and its effects on aerodynamic coefficients were investigated. The downwash angle of tail wing was calculated with experimental data and the effect of wing-tail interference was expressed as a ratio of angle of attack. Numerical simulations were made to examine flow characteristics of wing-tail interference and the vorticity contour of missile were compared with respect to angle of attack. Experimental and numerical analysis results show that the wing-tail interference has significant effects on static stability of tail-controlled missile.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.328-341
• /
• 2010

The authors adopt the Unmanned Undersea Vehicle(UUV), which has taken the shape of manta(Sohn et al. 2006). They call here it Manta-type Unmanned Undersea Test Vehicle(MUUTV). MUUTV is designed with the similar concept of UUV called Manta Test Vehicle(MTV), which was originally built by the Naval Undersea Warfare Center, USA(Lisiewicz and French 2000, Sirmalis et al. 2001, U.S. Navy 2004). The present study deals with evaluation of extreme motion of MUUTV at large attack angles. Extreme motion contains, for example, rising and depth change due to operation of hovering thrusters attached to MUUTV, lateral motion due to ocean current applied to MUUTV at low advance velocity, and so on. Numerical simulation technique has been utilized. The previous mathematical model on manoeuvring motion of MUUTV(Bae et al. 2009a) is basically adopted. Based on the results of present model experiment on extreme motion, the mathematical model is revised and supplemented in order to describe extreme motion. The hydrodynamic derivatives related to extreme motion are obtained from present model experiment and the other derivatives are referred to previous work(Bae et al. 2009a).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.8
• /
• pp.709-714
• /
• 2014

Reverse-offset printing is one of the technologies that can be used for patterning fine features of the order of a few micrometers for printed electronics. In reverse-offset printing, a coated ink film is transferred to a blanket made of elastomer-like poly-dimethylsiloxane. Then, the blanket is impressed onto a clich$\acute{e}$ that has intaglio patterns. The blanket is deformed by penetrating the intaglio of the clich$\acute{e}$ according to the printing pressure. Excessive deformation of the blanket can cause printing defects upon touching the bottom of the intaglio pattern, especially in large patterns. In this paper, we modelled the deformation of the blanket using the finite element method. Considering the actual printing parameters, a condition for fabricating a clich$\acute{e}$ is proposed to prevent defects by the deformation of the blanket.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.6
• /
• pp.445-451
• /
• 2018

This paper describes on introduction of CASE 4(Delta Wing) for EFD-CFD comparison workshop which is in charged of aerodynamic subcommittee of The Korean Society for Aeronautical and Space Science. The wind tunnel test will be performed later, angle of attack is set -5~20deg and mach number is set 0.7, 0.85, 1.2 to solve the transonic flow. The simulation test of grid dependency is conducted to determine the proper grid size of delta wing analysis. The tendency of lift and drag coefficient is determined according to the change of angle of attack based on the selected grid size.