• Journal of the Korean Society of Groundwater Environment
• /
• v.2 no.1
• /
• pp.14-21
• /
• 1995

Colloids such as exogenous biocolloids in a bioremediation operation can enhance the transport of contaminant in ground water by reducing retardation effects. Because of their colloidal size and favorable surface conditions in addition to their low density, bacteria can act as efficient contaminant carriers. When mobile bacteria are present in a subsurface environment, the system can be treated as consisting of three phases: water phase, bacterial phase, and the stationary solid matrix phase. In this work, a mathematical model based on mass balances is developed to describe the facilitated transport and fate of a contaminant in a porous medium. Bacterial partition between the bulk solution and the stationary solid matrix, and the contaminant partition among the three phases are represented by the equilibrium relationships. Solutions were obtained to provide estimates of contaminant and bacterial concentrations. A dimensionless analysis of the transport model was utilized to estimate model parameters from the experimental data. The model results matched with experimental data of Jenkins and Lion (1993). The presence of mobile bacteria enhances the contaminant transport. However, bacterial consumption of the contaminant which serves as a bacterial nutrient, can attenuate the contaminant concentration.

• Korean Journal of Materials Research
• /
• v.2 no.3
• /
• pp.220-227
• /
• 1992

Electrorheological(ER) fluid's storage shear modulus(G') and loss factor(${\eta}$) have been directly measured using small amplitude forced oscillating rheometer as a function of oscillating frequency, strain amplitude and applied electric field. Two types of experiment were performed , (a) frequency sweep and (b) amplitude sweep. Two kinds of sample were employed for this experiment ; cornstarch particles in corn oil and zeolite particles in silicone oil. The storage shear modulus was a strong function of driving frequency. Generally, the modulus increased with driving frequency. On the other hand, the loss factor was not well behaved as storage modulus, but as the driving frequency increases the loss factor slightly decreases was the trend of the material's characteristics. Also the modulus was a strong function of strain amplitude. Generally, modulus decreased with increasing strain, but loss factor increases slightly with increasing strain amplitude. For G', cornstarch in corn oil ER fluid has higher values than zeolite based fluid as we increased applied electric field. On the other hand, zeolite based fluid has higher values for ${\eta}$. There is a reasonable agreement between theoretical calculation and experiment.

• Bulletin of Food Technology
• /
• v.15 no.3
• /
• pp.112-124
• /
• 2002

발효란"박테리아,곰팡이,효모의 효소에 의해 일어나는 계속적인 변화"로 규정한다. 발효에 의해 일어나는 화학적 변화의 예를 들면 우유의 acidulation. 전분의 분해.설탕이 알콜과 이산화탄소로 변화되는 것과 질소 유기화합물의 산화등이 있다. 배지, 온도, 소금, 산도 배양 용기 및 시간과 같은 몇몇 요인이 발효 과정에 중요한 역할을 한다. 사실 발효식품 제조에 있어서 제품의 향미,텍스쳐,아로마 기타 다른 요소들이 어느 정도의 발효시간에 따라 차이가 있기때문에 단순히 급하게 서두를 수도 없다. 빵, 맥주, 사이다, 와인, 치이즈와 요구르트류의 식품과 음료는 발효과정을 통해 만들어진다. 이들 제품 이외에 어떤 제품은 다른 식품 제조에 이용될 수 있는데, 광의의 이들 식품 소재는 새롭고 기발한 발효기법 뿐아니라 전통적인 기법을 사용해서 생산 되기도 한다. 예를 들면 잔탄검(xanthan gum)은 고분자 폴리사카라드로 Bacterium xanthomona campestris를 이용한 발효과정을 통해 생산되는데 기질로서 설탕을 사용한다 젤란검(Gellan Gum)은 수용성 폴리사카이라이드로 Sphingomonas elodea 순수균의 발효에 의해 생산된다. 이와 같은 다중 기능의 하이드로콜로이드는 IFT Food technology 산업 성공상을 수년에 걸쳐 받았고, 제조업자들은 이것을 증점제, 안정제, 조직강화제로 이용했다. 최근 식품, 음료와 의약품에 사용하는 소이이소플라본(soy isoflavone)이 주목을 받고 있다. 소이이소프라본 중 제니스데인(genistein). 다이드제인(daizein)과 글라이스데인(glycitcin) 같은 soy sioflavone이 건강에 이익을 준다고 연구되었고, 독자적인 발효 과정으로 건강 증진과 기능성을 준다는 이들 성분이 더 많이 함유하는 대두 제품을 내놓고 있다. 본문에서는 12개 발효소재(ingredients)를 살펴보고 이들의 최근 개발동향을 재조명해 보았다. 이들의 개발동향은 시간이 결정적인 요인이 될 수 있는 발효과정을 사용하기 때문에 시기적으로 적절하게 인식될 수 있을뿐만 아니라, 건강, 장점,향미와 관련된 오늘날의 시장경향일 수도 있다.

• Journal of Korean Society of Forest Science
• /
• v.30 no.1
• /
• pp.19-29
• /
• 1976

The fiberboard and paper mills in this country are much affected by the price hikes and shortage of phenolic resins, since phenolic acid as a raw material depends on imported good. It is prerequisite to fiberboard industry to help replace with other sized and stabilize the prices and supply of them, improving the quality of boards. Thus, the present study was carried out to examine the effect of strength increasing sized such as urea formaldehyde resin (anion and cation type) and urea melamine copolymer resin, on the quality of the wet forming hardboard, and comparing them with two types of proprietary modified melamine resins, and ordinary size, phenol resin. The Asplund pulp was prepared from wood wastes mixed with 20 percent of lauan and 80 percent of pines as a fibrous material. After sizing agents were added at a pH of 4.5 for 10 minutes with alum in the beater, the stock was made in the form of wet sheet, prepared, and then performed by hot pressing cycle: $180^{\circ}C$, $50-6-5kg/cm^2$, 1-2-7 minutes. The properties of hardboard were examined after air conditioning. The results obtained are summarized as follows: 1. There is a significant difference in specific gravity among hardboards that were treated with strength increasing resins, but no difference is effected by the increase in the resin content. In the case of modified melamine resin, its specific gravity is highest. The middle group comprises cation type of urea resin, anion type of urea resin, and acid colloid of urea-melamine copolymer resin. The lowest is phenolic resin. 2. The difference of the moisture content of hardboard both by the resins and by the amount of each resin applied is significant. The moisture content of hardboard becomes lower along with the increase of each resin content, but there is no difference between 2 and 3 percent. 3. For water absorption, there is a significant difference both in the adhesives used and in the amount of paraffin wax emulsion. The water resistance becomes higher inn proportion to the content of the paraffin wax emulsion. To satisfy KS F standards of the water resistance, a proprietary modified melamine resin (p-6100) and modified cation type of urea resin (p-1500) do not require any paraffin wax emulsion, but in the case of anion type of urea resin, cation type of urea resin, and urea-melamine copolymer resin, 1 percent of paraffin wax emulsion is needed, and 2 percent of paraffin wax emulsion in the case of phenolic resin. 4. The difference of flexural strength of hardboard both by the resins and by the amount of each resin is significant. Modified melamine resin shows the highest degree of flexural strength. Among the middle group are urea-melamine copolymer resin, p-1500, anion type of urea resin, and cation type of urea resin. Phenolic resin is the lowest. The cause may be attributable to factors combined with the pressing temperature, sizing effect, and thermal efficiency of press platens heated electrically. 5. Considering the economic advantages and properties of hardboard, it is proposed that urea-melamine copolymer resin and cation type of urea resin be used for the development of the fiberboard industry. It is desirable to further develop the modified urea-melamine copolymer resin and cation type of urea resin through continuous study.

• Journal of Environmental Science International
• /
• v.27 no.1
• /
• pp.47-53
• /
• 2018

In this study, high-purity silver nanocolloids were synthesized by an electrolytic reaction, and the effect of temperature on the nanocolloid concentration was analyzed by performing the reaction at $70^{\circ}C$ and $90^{\circ}C$. The antibacterial properties of the thus-synthesized silver nanocolloids were also studied. When the synthesis was performed at $90^{\circ}C$, the concentration of silver nanocolloid increased to 14 mg/L after 5 min, 1756 mg/L after 30 min, and 2147 mg/L after 60 min. The concentration of silver nanocolloid synthesized by electrolytic reaction at $70^{\circ}C$ and $90^{\circ}C$ for 60 min was 1,882 mg/L and 2147 mg/L, respectively. The preferred temperature at which the electrolytic synthesis is performed is $70^{\circ}C$ to obtain high concentrations of 1,000 mg/L or more. The antibacterial performance of the thus-synthesized silver nanocolloids was 99.9% for E. coli and 99.5% for Pseudomonas aeruginosa.

• Polymer Science and Technology
• /
• v.15 no.2
• /
• pp.228-233
• /
• 2004

본 기고부분에서는 레이저 라만 분광법을 이용하여 나노입자에 흡착된 자기조립박막의 구조를 밝히고 응용성을 모색하는 일을 소개하고자 한다 Au 나노입자는 최근 재료과학과 의학 및 생물학에서 그 쓰임의 폭이 넓어지고 있다. 나노입자가 처음 사용된 예들 중에 가장 잘 알려진 것은 고대 로마 시대의 Lycurgus 컵에 기인한다고 한다. 컵 안에 함유된 미량의 은이나 금 나노입자에 의해서 반사했을 때와 투과할 때의 빛깔이 다르게 보이며 이러한 성질은 중세건축물의 스탠드 글라스에 이용되어 왔다. 근대적인 의미에서 Au 콜로이드의 수용액이 작은 미세입자가 분산되어 있다고 생각한 사람은 전기화학의 창시자라 할 수 있는 영국의 Faraday라 할 수 있다.(중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.167.1-167.1
• /
• 2017

전이금속 디칼코게나이드는 서로 다른 전이 금속원소와 칼코겐 원소의 결합으로 이루어진 층상 구조의 물질이다. 그 중 텅스텐 이황화물($WS_2$)은 전이금속 화합물로써 풍부한 매장량으로 인하여 가격면에서 매우 저렴하며, 높은 온도에서도 잘 견딜 수 있는 열 내구성이 강해 물 분해 반응에서 촉매로 사용될 수 있는 가능성이 제시되었다. 이러한 $WS_2$을 매장량이 적은 고비용의 백금계 촉매를 대체하기 위한 물질로서 많은 연구가 활발히 진행되고 있다. 본 연구에서는 $WO_3$ 콜로이드 용액을 전기 영동 및 황화 처리 이용하여 $WS_2$를 합성하여 수소 발생 반응(Hydrogen Evolution Reaction, HER)촉매로서의 가능성을 확인하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.910
• /
• pp.1312-1319
• /
• 2004

Underwear is laundered frequently and most of them is made of cotton, but a cotton fiber is more difficult to modify than a synthetic fiber. We have attempted to determine the optimum conditions necessary whereby the lowest concentration of silver solution is needed to produce the greatest antimicrobial properties of cotton fabrics. For this study, colloidal silver was made by electrolysis. The concentration of colloidal silver was increased by increasing the area of the silver plates submerged in the water, the water temperature, the water hardness and the flow time of the water per 1l. However, the colloidal silver concentration was decreased by extending a space between the silver plates and increasing the water velocity. Cotton fabrics treated in the washing machine with 1.3 ppm colloidal silver solution for 10 minutes had effective microbial properties and an unperceivable reduction of reflectance.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.239-240
• /
• 2003

Recently, the works about antibacterial finishing have been actively investigated in textile industry because of increasing environmental pollution. Wool can easily be an medium for microorganisms growth under proper temperature and humid condition. These microorganisms can result in damages, skin irritations, and infections in wool products. For this reason, the wool materials must be protected against microorganisms in order to suppress their growth and dissemination as well as fiber damage. (omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.241-242
• /
• 2003

Silver has antibacterial property on bacteria of about 650 kinds and has been well known as non-toxic and non-tolerance in natural state. Recently, silver has been applied disinfection and antibacterial property to everyday life as health foods, filter, and exclusion of pollution. Nano-sized silver particle have very small size (〈10nm) and wide surface area per unit volume. PE/PP nonwovens used as back sheet or coverstock of baby diaper, adult diaper, sanitary napkin, and wiper. (omitted)