• 한국컴퓨터그래픽스학회논문지
• /
• 제11권4호
• /
• pp.1-10
• /
• 2005

본 논문에서는 주어진 삼차원 메쉬를 실시간에서 연필화로 표현하는 방법을 소개한다. 이를 위해 본 논문에서는 연필화의 특징을 분석한 후 분석된 특징들을 빠르고 간단하게 모사하여 표현하는 알고리즘을 제시한다. 이 알고리즘은 크게 윤곽선을 그리는 방법과 내부를 그리는 방법으로 나뉘며, 제시된 모든 알고리즘은 그래픽스 하드웨어를 이용하여 실시간으로 동작한다. 우선 물체의 윤곽선을 그리기 위해 사람이 윤곽선을 그릴 때의 특징을 분석하여 실제의 윤곽선과 비교해 약간의 오차를 지니면서 여러번 겹쳐 그린 듯한 윤곽선을 만들어 내는 방법을 제시한다. 또한 물체의 내부를 그리기 위해서 먼저 연필의 특징을 잘 반영하는 텍스쳐를 만든 후 이를 물체의 표면에 매핑시켜 물체의 특징을 연필화풍으로 잘 표현하는 방법을 제시한다. 이 과정에서 연필화의 느낌을 강조하기 위해 물체가 그려지는 종이의 질감을 표현하는 방법과 물체의 명암비를 조정하는 방법 역시 제시한다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.64-69
• /
• 2004

The work presented here deals with controller design using error model constructed with proportional control ramp response. The design aims at the improvement of transient response, steady-state error reduction with stability preservation, generation of the consistent contour error through the proportional gain regulation of a mismatched system. The first step is to generate tracking-error curve with proportional control only and decide the added error signal shape on the error curve. The next is to construct a table for the steady-state loop gain with step input. The table is used for selecting the proportional gain. The effectiveness of the proposed controller is confirmed through the simulation and experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.341-344
• /
• 1997

The higher precision in manufacturing field is demanded, the more accurate servo controller is needed. To achieve the high precision, Koren proposed the cross-coupled control (CCC) method. The objective of the CCC is reducing the contour error rather than decreasing the individual axial error. The performance of CCC depends on the contour error model. In this paper we propose a new contour error model which utilizes contour error vector based on parametric curve interpolator. The experimental results show that the new CCC is more accurate than the variable-gain CCC during free-form curve motion.

• 전자공학회논문지SC
• /
• 제37권1호
• /
• pp.10-18
• /
• 2000

본 논문에서는 2축 서보시스템에 적용하기 위한 새로운 윤곽 모델링을 이용하여 퍼지논리형 상호결합제어기를 제안한다. 일반적인 각 축 독립제어기는 각 축의 동적 변수와 루프 이득의 불일치로 인해 윤곽 성능을 감소시킨다. 실제적으로 이러한 시스템은 많은 불확실성도 보유하고 있다. 상호결합제어기는 정확한 윤곽을 구하기 위해 모든 축의 위치 오차 정보를 동시에 이용한다. 그러나 일반적인 상호결합제어기는 마찰, 백래쉬 그리고 매개변수 변화를 극복하지 못한다. 또한 정확한 다축 시스템의 수학적 모델을 얻기 힘들기 때문에 서보시스템의 퍼지논리형 상호결합제어기를 제안한다. 이와 더불어 새로운 윤곽 오차 벡터 계산법을 제시한다. 제안한 알고리즘의 성능을 검증하기 위해 실험결과를 나타낸다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.926-931
• /
• 2008

In order to design a high-performance controller with excellent positioning and tracking performance, an optimal tuning method based on the integrated design concept is studied. DOBs, feedforward controllers and CCC are applied to control the bi-axial linear servomechanism. To derive accurate dynamic models of mechanical subsystems equipped with linear servos for the integrated tuning, system identification processes are conducted through the sine sweeping. An optimal tuning problem with stability, robustness and overshoot constraints is formulated as a nonlinear constrained optimization problem. Optimal gains are obtained through the SQP method. Experimental results confirm that both tracking and contouring errors are significantly reduced by applying the proposed controller and integrated tuning method.

• 한국정밀공학회지
• /
• 제26권4호
• /
• pp.16-22
• /
• 2009

• 한국공작기계학회논문집
• /
• 제17권5호
• /
• pp.44-51
• /
• 2008

In this paper, the optimal tuning of a cross-coupled controller linked with the feedforward controller is studied to reduce contouring and tracking errors of a bi-axial servomechanisms by using the previously developed integrated tuning method. The CCC system for an arbitrary curve, which is combined with the feedforward controller, is formulated by a state-space based on a series of linear motion trajectories. An optimal tuning problem is formulated as a nonlinear constrained optimization problem including relevant controller parameters of the servo. To verify the effectiveness of the proposed optimal tuning procedure, linear and circular motion experiments are performed on the xy-table. Experimental results confirm that both tracking and contouring errors are significantly reduced by applying the proposed control and tuning system.

• 대한기계학회논문집A
• /
• 제28권1호
• /
• pp.40-47
• /
• 2004

This paper proposes a three-axis coupling controller designed to improve the contouring accuracy in machining of 3D nonlinear contours. The proposed coupling controller is based on an innovative 3D contour error model and a PID control law. The novel contour error model provides almost exact calculation of contour errors in real-time for arbitrary contours and can be integrated with any type of existing interpolator. In the proposed method, three axes of motion are coordinated by the proposed coupling controller along with a proportional controller for each axis. The proposed contour error model and coupling controller are evaluated through computer simulations. The simulation results show that the proposed 3-axis coupling controller with the new contour error model substantially can improve the contouring accuracy by order of magnitude compared with the existing uncoupled controllers in high-speed machining of nonlinear contours.

• 한국정밀공학회지
• /
• 제28권2호
• /
• pp.168-175
• /
• 2011

Contouring accuracy of CNC machine tools is very important for high-speed and high-precision machining. In particular, large contour error may occur during corner tracking. In order to reduce the corner contouring error, acceleration and deceleration control or tool-path planning methods have been suggested. However, they do not directly control the corner contouring error. In the meantime, network servo systems are widely used because of their easiness of building and cost effectiveness. Communication latency between the master controller and servo drives, however, may deteriorate contouring accuracy especially during corner tracking. This paper proposes a control strategy that can accurately calculate and directly control the corner contouring error. A prediction control is combined with the above control to cope with communication latency. The proposed control method is evaluated through computer simulation and experiments. The results show its validity and usefulness.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.446-451
• /
• 2000

In this paper, a new adaptive cross-coupling control (CCC) algorithm with an improved contour error model is proposed to maintain contouring precision in high-speed nonlinear contour machining. The proposed method utilizes variable controller gains based on the instantaneous curvature of a contour and the feedrate command. The proposed method is evaluated and compared with the conventional CCC for nonlinear contouring motion through computer simulations. The simulation results show that the proposed CCC improves the contouring accuracy more effectively than the existing method.