• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.307-317
• /
• 1991

선체구조 및 해양구조물의 기본 구조요소로 사용되는 편심으로 보강된 평판이나 쉘 수조물의 기하하적 비선형 해석에 관한 논문으로서 사용된 유한요소는 격하 쉘요소와 편심된 격하보요소이며 total Lagrange(T.L.)수식과 updated Lagrange(U.L.)수식으로 정식화 하였다. 편심된 보강평판의 비선형 해석에서 사용된 모델은 보강재의 이상화 방법에 따라 평판과 보강재를 격하 쉘요소로 이상화한 모델과 평판은 격하 쉘요소로하고 보강재는 편심된 격하 보요소로 이상화한 모델로 각각 구분하여 비선형 해석을 수행하였으며 해석과정에서 편심 보강평판의 임계하중을 구하고 좌굴 후 비선형 거동을 조사하였다. 해석된 임계 좌굴하중은 선급에서 규정하고 있는 방식의 오일러의 좌굴하중값 보다는 낮게 조사되었다.

• 전산구조공학
• /
• 제3권2호
• /
• pp.77-88
• /
• 1990

환경조건 및 내부의 유공부 크기와 위치가 변화함에 따라 평판의 두개의 고유치(고유 진동수와 탄성 임계하중)는 어떻게 변화하며, 이들 고유치 상호간의 관계는 어떻게 되는지 검토 하기로 한다. 이상과 같은 검토 목적에는 수치 해석법이 적당한데 본 논문에서는 그 중의 하나인 유한 요소법을 채택하기로 한다. 유한 요소법에서 이용할 요소는 각 절점에서 자유도가 3, 따라서 요소 전체의 자유도가 12인 사각형 요소이다.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2329-2338
• /
• 1993

An accurate analysis procedure to solve the flow about a flat plate at various incidences has been developed. The Navier-Stokes equations of stream function and vorticity form are solved in a sufficiently large computational domain, in which the grid lines are mutually orthogonal. The details of the flow near the singularity at the tip of the plate is well captured by the analytic solution which is asymptotically matched to the numerically generated outer solution. The solution for each region is obtained iteratively : the solution of one (inner or outer) region uses that of the other as the boundary condition after each cycle. The resulting procedure is accurate everywhere and also computationally efficient as the singularity has been removed. It is applied to the flat plate for a wide range of Re : the results agree very well with the existing computation and experiment.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.173-181
• /
• 2000

The stability of a structural plate is a crucial problem which causes wrinkling and buckling. In this paper, the effect of the pattern of spot-welding points in the two rectangular plate on the shear buckling load is studied with respect to the thickness, the aspect ratio of plates, the number of welding spots. Buckling coefficient of the simple plate was compared with that of two plates with various conditions to extract the effect of buckling strength. The effect of the number of welding spots are studied in two directions, longitudinal and transverse directions. The concluded that the reinforcement effect was maximized when the aspect ratio was close to 1.5 and that the effect of number of welding spots in longitudinal direction was larger than that in transverse direction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.496-497
• /
• 2009

In this paper the power flow finite element method (PFFEM) has been used to analyze the vibration of a plate partially covered with a damping sheet. Experiments have been performed to measure the loss factor and frequency response functions of the plate partially covered with the damping sheet. The data for the loss factor has been used as the input data to predict the vibration of the coupled plates with PFFEM. The comparison between the experimental results and the predicted PFFEM results for the frequency response functions has been performed. It showed that PFFEM can be effectively used to predict structural vibration in medium-to-high frequency ranges.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.668-671
• /
• 1997

In order to investigate the vibration characteristics of fluid-structure interaction problem, we modeled two identical rectangular plates coupled with bounded fluid. The fixed boundary condition along the plate edges and an ideal fluid were assumed. A commercial computer code, ANSYS was used to perform finite element analysis and FEM solutions were compared with the experimental results to modify the finite element model. As a result, comparison of FEM and experiment showed good agreement, and the transverse vibration modes, in-phase and out of-phase. were observed alternately in the tluid-coupled system. The effects of distance between two rectangular plates and width to length ratio on the fluid-coupled natural frequency were investigated. And it was found that the ormalized natural frequency of the fluid-coupled system monotonically increased with an increase in the number of modes.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2096-2105
• /
• 1997

A parallel approach using a network of engineering workstations is presented for the efficient computation in the elastoplastic analysis of strip rolling process. The domain decomposition method coupled with the frontal solver for elimination of internal degrees of freedom in each subdomain is used. PVM is used for message passing and synchronization between processors. A 2-D plane strain problem and the strip rolling process are analyzed to demonstrate the performance of the algorithm and factors that have a great effect on efficiency are discussed. In spite of much communication time on the network the result illustrates the advantages of this parallel algorithm over its corresponding sequential algorithm.

• 대한조선학회논문집
• /
• 제32권2호
• /
• pp.75-83
• /
• 1995

생산현장의 판굽힘가공 자동화를 위한 기초연구로서 강판의 선상가열 변형을 역학적 측면에서 고찰하고 3차원 비선형 과도 열탄소성 유한요소해석을 통한 수치 시뮬레이션을 시도하였다. 가스토치에 의해 가열되는 평판의 비정상 열전달 문제를 해석하며 온도분포의 시간이력을 계산하였고 이를 바탕으로 평판의 과도 열변형과정을 해석하였으며 그 결과를 상세히 고찰하였다.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.92-97
• /
• 2007

It is important to compute the structural analysis of plate structures in structural design. In this paper, the author uses the finite element-transfer stiffness coefficient method (FE-TSCM) for the structural analysis of plate structures. The FE-TSCM is based on the concept of the successive transmission of the transfer stiffness coefficient method and the modeling technique of the finite element method (FEM). The algorithm for in-plane structural analysis of a rectangular plate structure is formulated by using the FE-TSCM. In order to confirm the validity of the FE-TSCM for structural analysis of plate structures, two numerical examples for the in-plane structural analysis of a plate with triangular elements and the bending structural analysis of a plate with rectangular elements are computed. The results of the FE-TSCM are compared with those of the FEM on a personal computer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.700-703
• /
• 1999

Thls paper describes the process of corona discharge in $SF_6$ gas. The discharge characteristm such as electric field distribution, electron density, ion density and current denslty distribution are considered as time go by, The result show that difference between electronegative gas and nonelectronegative gas.