• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.534-537
• /
• 2012

Hydroelastic effects on sloshing phenomena in a rectangular tank are numerically investigated. The dimension of the tank is $1000mm{\times}600mm$, and the filling ratio of water is 20% of tank height. One of the side walls of tank is assumed to be flexible. The tank is excited into sway motion with amplitude of 100mm and frequency of 0.53Hz that is first natural frequency of water inside the tank. Prediction results for time histories of pressure and displacement of flexible and rigid walls are compared to quantitatively assess hydroelastic effects on sloshing phenomena.

• 대한조선학회논문집
• /
• 제44권6호
• /
• pp.619-626
• /
• 2007

This paper presents an experimental study on deformations and force characteristics of flexible plates both in air and water. The focus is on the complicated interaction problem between the fluid and flexible structures. The displacements and forces of free oscillating plates are measured and compared with each others. The effects of several plate coefficients are investigated i.e. plate thickness, aspect ratio, plate area, plate width ratio, bending angle. For the verification of the experimental results, some of them are compared with numerical simulation and show reasonable agreements.

• 대한조선학회논문집
• /
• 제41권2호
• /
• pp.55-60
• /
• 2004

This paper describes the estimation method of hull girder response of ships due to springing. To this aim, nonlinear springing effect on the hull girder is evaluated including vertical, horizontal, and torsional deformation of the hull. The Timoshenko beam model is used to calculate the stress distribution on the hull girder. The quadratic strip method is employed to calculate the hydrodynamic forces and moments on the hull. In order to remove the irregular frequencies, 'rigid lid'is adopted on the hull free surface level and hydrodynamic coefficients are interpolated for asymptotic values. The results of example calculation show a reasonable agreement with previous results for both symmetric and anti-symmetric responses.

• 한국해양공학회지
• /
• 제29권2호
• /
• pp.163-168
• /
• 2015

This paper presents the results of experimental work on the wedge slamming impact problem. An experiment was done with a wedge model. The deadrise angle of the wedge was $4^{\circ}$. The model was made in two parts: the outside part was made of a 5-mm-thick steel plate that could be assumed to be a rigid body, and the inside part was made of a thin SUS plate that could be assumed to be an elastic body. Thin SUS plate thicknesses of 2 mm and 3 mm were used to determine the effect of plate rigidity. The drop height was varied from 0.25 m to 1 m to determine the effect of a large deformation.

• 대한조선학회논문집
• /
• 제45권2호
• /
• pp.168-174
• /
• 2008

To calculate the fluid-structure interaction(FSI) problem rationally, it should be the basic technology to analyse each domain of fluid and structure accurately. In this paper, a new FSI analysis algorithm was introduced using the 3D solid finite element for structural analysis and CFD code based on the HCIB method for viscous flow analysis. The fluid and structural domain were analysed successively and alternatively in time domain. The structural domain was analysed by the Newmark-b direct time integration scheme using the pressure field calculated by the CFD code. The results for example calculation were compared with other research and it was shown that those coincided each other. So we can conclude that the developed algorithm can be applied to the general FSI problems.

• 한국해안해양공학회지
• /
• 제12권3호
• /
• pp.139-148
• /
• 2000

본 연구에서는 유체가 채워진 착저식 유연막 구조물과 파와의 상호작용 문제를 유탄성 이론을 사용하여 살펴보았다. 먼저 동역학적 문제를 풀기에 앞서 유체로 채워진 유연막 내부에 일정한 압력이 작용하였을 때, 유연막의 형상과 막에 작용하는 초기장력을 정역학문제를 풀어 구한다. 동역학적 문제를 풀기 위하여 유체영역을 내부영역과 외부영역으로 나누어, 내부영역을 유연막을 경계로 영역 1과 영역 2로 다시 나눈다. 내부영역에서는 경계요소법을 사용하여 파동장을 풀고, 외부영역에서는 고유함수전개법을 사용하여 해를 구한다. 두 영역이 만나는 정합면에서 이미 구한 해를 정합시켜 완전한 해를 구한다. 유연막의 거동은 원주 좌표계를 사용하여 유도된 선형화된 막방정식을 사용하여 이때 외력은 영역 1과 영역 2의 압력차로 주어지므로 영역 1과 영역 2의 해는 막방정식을 통하여 연성된다. 유체가 채워진 착저식 유연막 방파제의 성능에 미치는 중요한 변수로는 유연막의 형상(폭, 높이)과 유연막 내부압력, 유체의 밀도이다. 설계변수들을 바꿔가면서 유연막에 의한 파랑제어 효과를 투과율을 통하여 살펴보았다. 또한 파의 입사각도에 따른 파랑제어 효과를 함께 고찰하였다. 수치계산결과는 Ohyama의 실험결과와 비교하였고 두 결과는 정량적인 값 차이가 나지만 정성적으로 일치하고 있음을 확인하였다. 적절히 설계된 유연막은 소형어항 보호용이나 레저용 방파제로 활용할 수 있는 가능성을 발견하였다.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.220-232
• /
• 2005

Influences of stiffness distributions on hydroelastic responses of very large floating structures (VLFS) are studied in this paper. Hydroelastic responses are calculated by direct method employing higher-order boundary element method (HOBEM) for fluid analysis and finite element method (FEM) for structure analysis. In structural analysis using FEM, Mindlin plate elements are used. An 1 km-long VLFS with uniform stiffness and modified VLFS with varying stiffness distributions are considered in numerical analysis. Responses of VLFS increase in flexible parts and decrease in stiff Parts. Reduction degree of displacements of VLFS with stiffened center is larger than that of VLFS with stiffened sides.

• 한국해양공학회지
• /
• 제20권4호
• /
• pp.83-90
• /
• 2006

Recently, as the technology of utilization for the ocean space is being advanced, floating structures are asked for being mare and mare huge-scale. A very large floating structure(VLFS) is considered as a flexible structure, because of a quite large length-to-breadth ratio and its geometrical flexibility. The main object of this study is to develop an accurate and convenient method on the hydroelastic response analysis of very large offshore structures on the real sea states. The numerical approach for the hydorelastic responses is based on the combination of the three dimensional source distribution methods, the dynamic response analysis method and the spectral analysis method. A model is considered as many rigid bodies connected elastic beam elements. The calculated results shaw good agreement with the experimental and calculated ones by Ohta.

• 한국해양공학회지
• /
• 제22권1호
• /
• pp.22-29
• /
• 2008

A numerical investigation is made on the effects of the location and shape of the front wall of an OWC(Oscillating Water Column) chamber on the hydroelastic response of a VLFS. Most of the studies on the effects of an OWC chamber on the response of a VLFS have assumed the location of the OWC chamber to be at the front of the VLFS. In the present study, an OWC-chamber is introduced at an arbitrary position in relation to a VLFS to determine the influence of the location and shape of the OWC chamber on the hydroelastic response of the VLFS. A finite element method is adopted as a numerical scheme for the fluid domain. or the finite element method, combined with a mode superposition method, is applied in order to consider the change of mass and stiffness The OWC chamber in a piecewise constant manner. or the facilitated anefficient analysis of The hydroelastic response of the VLFS, as well as the easy modeling of different shape and material properties for the structure. Reduction of hydroelastic response of the VLFS is investigated for various locations and front wall shapes of the owe chamber.

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4828-4834
• /
• 2015

Action Time이란 탄이 공이가 뇌관을 격발한 순간부터 총구를 이탈할 때까지의 걸리는 시간을 말한다. 40mm 고속유탄은 장전되면서 격발되는 구조이므로 Action Time이 특정 시간 이내여야 탄피 고착과 같은 악작용을 방지 할 수 있다. 기존 40mm 고속유탄의 Action Time 계측은 신뢰성 있는 측정 장비의 부재로, 그동안 Action Time이 K4기관총 품질 보증에 적용되는 것에 어려움이 있었다. 본 연구에서는 다양한 센서 간 비교와 별도의 발사 장치 고안을 통해 정확한 Action Time을 측정하고자 하였다. 이 장치에서는 공이 부분에 설치된 광센서의 신호와 총열 부분에 설치된 와전류 탐촉자 신호 간 간격이 계측되고, 실시간으로 컴퓨터로 데이터가 전송되게 된다. 계측된 Action Time 결과가 시스템 요구 성능에 충족하는지 여부를 즉시 확인함으로써 40mm 고속유탄의 품질 보증에 중요한 역할을 할 것으로 기대된다.