• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.7-7
• /
• 1999

충돌/유출냉각은 연소실 벽면 등과 같이 열부하가 많이 걸리는 영역에서 고온의 연소가스로부터 표면을 보호하는 막냉각과 더불어 내부에 다공성 판을 설치하여 충돌제트에 의해 내부표면을 냉각시켜 가스터빈엔진의 고온요소의 냉각성능을 극대화시키는 방법 중의 하나이다. 이와 같은 냉각방법을 적용하면 벽면을 충돌제트에 의한 냉각과 함께 냉각유채를 막냉각에 활용함으로써 냉각효율을 극대화할 수 있다. 본 연구에서는 국소적인 값들을 획득하기 용이한 물질전달실험방법의 하나인 나프탈렌 승화법을 이용하여 수직으로 분사되는 충돌제트에 의한 유출판 내면에서의 열/물질전달특성을 분사판(injection plate)과 유출판(effusion plate) 사이의 높이, 분사제트의 속도, 분사홀간의 배열을 변화시켜가며 유출판만이 있는 경우와 비교, 분석하였다. 분사홀과 유출홀의 관 사이의 간격은 0.33d에서 10d까지 변화시켜가며 그 효과를 관찰하였으며, 홀배열 효과를 보기 위하여 2가지 홀배열(staggered array, shifted array)에 대하여 실험하였다. 또한 분사제트의 속도효과를 고찰하기 위하여 분사제트의 Rc$_{d}$=5,000-12,000까지 변화시켜가며 실험을 수행하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.2
• /
• pp.15-22
• /
• 2003

Computational study using the 2-dimensional, compressible, Navier-Stokes equations is performed to predict the discharge coefficient of air flow through a film-cooling hole. In order to investigate the effect of internal/external flows on discharge coefficient, the present computational results which are obtained for three flow cases, only external flow, only internal flow, and no flow, are compared with experimental ones. It is found that the computational results predict the discharge coefficient of the film-cooling hole in a reasonable accuracy and the external crossflow reduces the discharge coefficient, while the internal crossflow increases the discharge coefficient in a range of momentum flux ratio $I_{c-jet}$ > 1 due to the total pressure loss and boundary layer effect.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.3
• /
• pp.435-442
• /
• 2000

The present study is conducted to investigate the local heat/mass transfer characteristics for flow through perforated plates. A naphthalene sublimation method is employed to determine the local heat/mass transfer coefficients on the effusion plate. Two parallel perforated plates are arranged for the two different ways: staggered and shifted in one direction. The experiments are conducted for hole pitch-to-diameter ratios of 6.0, for gap distance between the perforated plates of 0.33 to 10 hole diameters, and for Reynolds numbers of 5,000 to 12,000. The result shows that the high transfer region is formed at stagnation region and at the mid-line of the adjacent impinging jets due to secondary vortices and flow acceleration to the effusion hole. For flows through the perforated plates, the mass transfer rates on the surface of the effusion plate are about six to ten times higher than for effusion cooling alone (single perforated plate). More uniform and higher heat/mass transfer characteristic is obtained in overall region with small gap between two perforated plates.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.489-496
• /
• 2001

Two perforated plates are used to investigate local heat/mass transfer characteristics in an impingement/effusion cooling system. A naphthalene sublimation method is conducted to determine the local heat/mass transfer coefficients on the upward facing surface of the effusion plate. The two plates are placed in parallel position with gap distances of 1, 2, 4 and 6 times of effusion hole diameter. The effects of hole arrangements of the plates are studied for staggered, square, and hexagonal arrays. The experiments are conducted at Reynolds number of 10,000 based on the effusion hole diameter. The results show that the smaller hole size in the staggered array has the higher transfer coefficients on the stagnation region due to the formation of higher momentum flows through the impingement holes. In the square array, heat/mass transfer on the target plate is more uniform as the number of impingement holes increases. High and uniform heat/mass transfer coefficients are obtained in the hexagonal array.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2219-2226
• /
• 2003

Two perforated plates are placed in parallel and staggered arrangements with a gap distance of 2 times of the hole diameter, and initial crossflow passes between the plates. Both the injection and effusion hole diameters are 10 mm, and the Reynolds number based on the hole diameter and hole-to-hole pitch are fixed to 10,000 and 6 times of the hole diameter, respectively. To investigate the effect of crossflow, the flow rate of crossflow is changed from 0.2 to 2 times of that of the impinging jet. A naphthalene sublimation method is used to determine the local heat/mass transfer coefficients on the upward facing surface of the effusion plate. With the initial crossflow, the heat/mass transfer rates on the effusion (target) plate decrease as the velocity of crossflow increases, since the crossflow induces the locally low transfer regions formed at the mid-way between the effusion holes. However, the impingement/effusion cooling with crossflow presents higher heat/mass transfer rates than the array jet impingement cooling with the same initial crossflow.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.276-282
• /
• 1996

일체형원자로는 노심, 증기발생기, 가압기, 펌프 등 1차측 주기기들을 하나의 압력용기안에 모두 포함하고 있고, 또 1차측 냉각재가 원자로 안에서만 순환하므로 기존의 분리형원자로에 비해 구조특성상 대용량 원자로 냉각재 상실사고(LBLOCA)의 발생 가능성을 원천적으로 제거할 수 있다. 반면 원자로 냉각재의 보충 등을 위한 소형 배관의 파단 가능성은 역시 존재하므로 소용량 원자로 냉각재 상실 사고(SBLOCA)는 여전히 존재한다. 따라서 현재 한국원자력연구소에서 연구 개발중인 중소규모 전력생산 및 열 활용 목적의 일체형 원자로에는, 원자로 압력용기 외부에 별도의 압력용기(안전용기)를 설치하여 SBLOCA시 원자로 압력용기로부터 방출되는 냉각수를 안전 용기내에 보관하도록 함으로써 사고시 외부로의 방사성 물질 유출 가능성을 획기적으로 줄 일수 있는 설계 개념을 도입하고 있다. 본 논문에서는 안전용기의 설계시 효율적인 냉각방식에 대한 열유체 해석적 접근을 시도하였고, 예비개념설계된 일체형 열병합원자로의 설계상의 특징들 및 안전용기 설계시 앞으로의 연구방향 등도 간략히 소개하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.12 s.255
• /
• pp.1147-1154
• /
• 2006

An experimental investigation was conducted to enhance the heat/mass transfer for impingement/effusion cooling system when the initial crossflow was formed. For the improvement of heat transfer, the circular guide is installed on the injection hole. At the fixed jet Reynolds number of 10,000, the measurements were carried out for blowing ratios ranging from 0.5 to 1.5. The local heat/mass transfer coefficients on the effusion plate are measured using a naphthalene sublimation method. The result presents that the circular guide protects the injected jet from the initial crossflow, increasing the heat/mass transfer. The heat transfer of stagnation region is hardly changed regardless of the blowing ratio. The secondary peak is obviously formed by flow transition to turbulent flow. At high blowing ratio of 1.5, the circular guide produces $26{\sim}30%$ augmentation on the averaged heat/mass transfer while the case without circular guide leads to the low and non-uniform heat/mass transfer. With the increased heat/mass transfer, the installation of circular guide is accompanied by the increase of pressure loss in the channel. However, the pressure drop caused by the circular guide is lower than that for other cooling technique with the circular pin fin.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.731-738
• /
• 1996

노심 손상이 일어나는 중대사고 발생시 고온의 노심 용융물이 윈자로 용기를 파손시키며 캐비티 내로 유출되는 경우, 노심 용융물과 냉각재의 폭발적 반응을 억제하고 잔열제거를 위한 효과적인 냉각수 주입 방법을 규명하는 실험을 수행하였다. 냉각수 주입 방법은 파이프 관을 이용한 단순 fouling 방식과 노즐을 이용한 Spray 방식, 그리고 반응용기의 옆면으로 냉각수를 주입하는 세 가지 방식을 채택하였다. 동일한 실험 조건에서 각각의 주입 방법에 따른 반응 형태 및 냉각 정도를 알아보는 실험을 수행하였다. 본 논문에서는 일차적으로 노심 용융물의 모사체로 사용한 주석 용융물에 Pouring 방식과 Spray 방식으로 냉각수를 주입한 경우의 실험 결과를 정리하였으며, 분석 결과 Spray 방식으로 냉각수를 주입한 경우에 폭발적 반응이 일어나지 않고 냉각됨을 알 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.1
• /
• pp.101-109
• /
• 2002

Two perforated plates are used to investigate local heat/mass transfer characteristics in an impingement/effusion cooling system. A naphthalene sublimation method is conducted to determine the local heat/mass transfer coefficients on the upward facing surface of the effusion plate. Two plates are placed in parallel position with gap distances of 1, 2, 4 and 6 times of effusion hole diameter. The effects of hole arrangements of the plates are studied fur staggered, square, and hexagonal arrays. The experiments are conducted at Reynolds number of 10,000 based on the effusion hole diameter. The results show that the smaller hole size in the staggered array has the higher transfer coefficients on the stagnation region due to the formation of higher momentum flows through the impingement holes. In the square array, heat/mass transfer on the target plate is more uniform as the number of impingement holes increases. High and uniform heat/mass transfer coefficients are obtained for the hexagonal array.

• Journal of the Korean association of regional geographers
• /
• v.21 no.3
• /
• pp.608-617
• /
• 2015

This paper synthetically analyzes micrometeorological data and geomorphological features of Doeksan-ri Eoreumgol(ice valley) Yeongdeok-gun in order to investigate occurrence characteristics of the ice valley and a mechanism for freezing in summer. This ice valley is located in the distal end of a talus and intensity of cooling and freezing in summer seems to be related to morphology and dimensions of talus. Cooling in the ice valley is generated by cold air flows that move down to the bottom of talus from high mountains through pores and voids, then debris in talus is supercooled by the cold air. For it forms a stable state in and around voids cold air is stagnating in the lower end of talus. This causes freezing in summer at outpour points. Furthermore humidity condition of external air and vaporization heat is a key factor when freezing.