• Title/Summary/Keyword: 유출계수

Search Result 778, Processing Time 0.074 seconds

Analyzing runoff load of NPS for rainfall event in Hongje basin (홍제천 유역 강우시 비점오염 유출부하 분석)

  • Ho Jong-Kwang;Oh Kyung-Seok;Hwang Byung-Gi
    • Proceedings of the KAIS Fall Conference
    • /
    • 2004.11a
    • /
    • pp.306-309
    • /
    • 2004
  • 홍제천 유역의 비점오염원 유출부하를 분석하기 위해 강우시 하천 유량 및 수질 발생 특성, 유출고 및 유출계수 분석, 비점오염원 유출부하특성 및 원단위 산정 등에 대하여 연구하였다. 유량 및 유량가중평균농도의 경우 각 조사 시기별 강우사상에 많은 영향을 받아 크게 증가하였다가 감소하는 경향을 나타내고 있으며, 강우 1차$\~$3차 조사시기 동안 상류에서 하류로 유하 할수록 농도의 변화가 일정하지 않은 것으로 나타났다. 지점별 유출계수를 살펴보면, 구기천 및 신영천 유역 중 투수층인 산지지형이 넓게 분포되어 있어 유출계수가 낮게 산정되었으며, 구간별 배수구역 면적을 고려한 강우시 비점오염원 부하를 산정한 결과를 살펴보면 SS의 유출부하가 높게 나타나 부유물질의 주된 성분이 생물학적으로 분해 가능한 성분이기보다는 하상 퇴적물질 및 생물학적으로 난분해성 유기물질일 것으로 사료된다.

  • PDF

Modular Modeling System(MMS)코드를 이용한 영광5,6호기 유출관계통에서의 과도현상 해석

  • 고용상;안장선;정장규;박병호;고득윤
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05a
    • /
    • pp.526-531
    • /
    • 1996
  • 영광5,6호기 유출관계통은 영광3,4호기의 유출관계통과는 달리 세개의 유출수 압력강하 오리피스 및 유출관 오리피스 개폐밸브론 이용하여 유출유량 및 압력을 제어한다. 새로이 설계 변경된 유출관계통의 성능 및 운전을 평가하기 위해서 Modular Modeling System(MME) 코드를 이용하여 분석을 수행하였다. 분석결과 배압제어기 제어변수의 계수선정이 계통의 과도현상에 매우 큰 영향을 미치고 있기 때문에 배압제어기 제어변수 선정이 계통의 과도현상 완화에 매우 중요한 인자임을 알 수 있었다. 그리고 배압제어기의 계수만 적절하게 선정되어 있다면, 유출관오리피스 개폐밸브의 Stroke 속도변화에 따른 계통의 과도현상에 미치는 영향은 거의 없음을 알 수 있었다. 또한 유출관오리피스 개폐밸브 특성이 선형인 경우가 Equal Percentage 특성을 갖는 경우 보다 과도현상 방지측면에서 우수하며, 배압제어기 제어변수의 계수만 적절하게 잘 선정된다면 유출관오리피스 개폐밸브의 운전에는 관계없이 계통의 과도상태를 적절하게 제어할 수 있다는 것을 알 수 있었다.

  • PDF

Injector Discharge Characteristics of Liquid Rocket Engine (액체 로켓엔진의 분사기 유출 특성)

  • 조원국;류철성;김영목
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.5 no.4
    • /
    • pp.12-19
    • /
    • 2001
  • The discharge characteristics of the oxidizer injector of liquid rocket engine were investigated. The discharge performance was obtained numerically which agreed quantitatively with the measured data. The discharge coefficient is proportional to the cavitation number for cavitating flow and constant for non-cavitating flow. The Reynolds number, however, affects little the discharge coefficient. The discharge coefficient decreased slightly as the Reynolds number increased because the friction loss decreased relatively at high Reynolds number flow.

  • PDF

Impacts of Surface Roughness Integration using Remote Sensing Data: Concentration of Flood Flow Variation (원격탐사자료를 활용한 지표면 조도계수 통합의 영향: 홍수유출 변화를 중심으로)

  • Kang, Shin-Uk;Rieu, Seung-Yup;Lee, Kil-Ha;Hwang, Man-Ha
    • 한국공간정보시스템학회:학술대회논문집
    • /
    • 2007.06a
    • /
    • pp.333-338
    • /
    • 2007
  • 원격탐사 자료를 이용한 토지피복도로부터 유역의 식생상황을 고려한 지표면 조도계수를 추정하기 위한 물리적 기반의 지표면 조도계수 추정방법을 제안하였다. 사전 연구로써 지표면 조도계수의 변화에 따른 첨두유량, 유출체적, 첨두시간에 대한 반응을 분석하기 위하여 NWS-PC 모형을 사용하였다. predominant, arithmetic mean, aggregation방법으로 구해진 지표면 조도계수가 강우-유출 모형의 매개변수에 미치는 영향을 분석하였다. 지표면 조도계수에 대한 민감도 분석에서는 첨두유량이 약 10%의 변화를 나타내었고, 유출체적의 경우 약 2%의 변화를 나타내었다. 첨두시간은 지표면 조도계수에 비례하여 증가하는 것으로 나타났다.

  • PDF

A Study on a Runoff Coefficient of Block Paved Area with Considering Regional Rainfall Distribution (지역별 강우분포를 고려한 블록포장지역의 유출계수 산정에 관한 연구)

  • Kang, Shin-Kweon;Kim, Tae-Gyun
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.36 no.4
    • /
    • pp.111-119
    • /
    • 2008
  • The runoff coefficient for a block paved area is determined with regional rainfall distribution. The Rational Method is a basic equation of a drainage system design and is a function of runoff coefficient, rainfall intensity and area. A runoff coefficient is the ratio of rainfall intensity and runoff. The rainfall intensity which is a function of the return period and rainfall duration differs by region. Therefore the runoff coefficient varies regionally even though there is the same return period and rainfall duration. The ratio of rainfall intensity and rainfall duration is decided by the loss of rainfall. The constant infiltration capacity of Horton's equation is adopted to determine the loss of rainfall. As time passed, the joint of the block paved area through which the infiltration occurs is covered by pollution material, sandy dust, pollen and is hardened by foot pressure, so the constant infiltration capacity may decrease. Six different sites were selected to verify the assumption of the constant infiltration capacity decrease and 10 year return period. 10, 20, and 30 minute rainfall duration were applied to calculate rainfall intensity. The results indicate that the Horton's constant infiltration capacity decreases over time and the minimum constant infiltration capacity is selected to compute runoff coefficients. The runoff coefficients varied by region ranging from $0.94{\sim}0.84$ for 10 minute of rainfall duration.

Study on Pesticide Runoff from Soil Surface-III - Runoff of Pesticides by Simulated Rainfall in the Laboratory - (농약의 토양 표면유출에 관한 연구-III - 실내에서 인공강우에 의한 농약의 유출특성 -)

  • Yeom, Dong-Hyuk;Kim, Jeong-Han;Lee, Sung-Kyu;Kim, Yong-Hwa;Park, Chang-Kyu;Kim, Kyun
    • Applied Biological Chemistry
    • /
    • v.40 no.4
    • /
    • pp.334-341
    • /
    • 1997
  • In the laboratory experiment, concentration and rate of runoff of 7 pesticides were measured under the simulated rainfall. Total runoff rate of metolachlor, alachlor, chlorothalonil, chlorpyrifos, EPN, phorate and captafol were 57.0, 14.2, 13.2, 7.9, 7.2, 7.1 and 2.8%, respectively, and the average runoff concentrations were 940, 399, 55, 7.0, 9.3, 151 and 7.0 ppb, respectively. Significant relationship was observed between the runoff rate and water solubility in the laboratory experiment(r=0.923). Even though not very high, relatively significant results were obtained in other experimental conditions. Based on the results, runoff rate prediction$[Y=0.2812{\times}10exp(0.261logWS-0.366)+0.3594{\times}10exp(-0.545logKoc+1.747)+0.3594{\times}10exp(-0.362log\;Kow+1.105]$ and conversion equations were calculated to investigate the possibility of estimating runoff rate in the field by natural rain. Calculated runoff rate by conversion equation was similar to experimental result with captafol in the field while 6 times higher result was obtained by the prediction equation. Therefore, those prediction and conversion equations derived from the laboratory experiment data and physicochemical properties of the pesticides could be used for the prediction of field runoff rate of pesticides by natural rainfall.

  • PDF

The Sensitivity Analysis of Urban Runoff Models to Variations of Pipe Roughness Coefficient (조도계수 변화에 따른 도시유출모형의 민감도 분석)

  • Won, Changyeon;Park, Jongpyo;Ko, Taekjo;Keum, Hojun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.249-249
    • /
    • 2021
  • 도시지역의 우수유출해석 모형인 SWMM 모형의 매개변수는 유역유출관련 매개변수와 우수관로 매개변수로 구분이 된다. 이중 우수관로내 수리거동에 영향을 대표적인 매개변수는 조도계수가 있다. 우수관로 조도계수는 우수관로의 규격 및 재료에 따라 적용범위가 제시되어 있지만 현상태 관로내 퇴적 및 협잡물 등에 의한 조도변화가 발생하게 된다. 따라서 본 연구에서는 우수관로 조도계수의 변화에 따른 유량의 민감도를 검토하고 모니터링 유량과 비교를 통한 연구 대상지역의 최적 조도계수를 선정하였다. 연구 대상지역은 울산광역시 삼호동 일대이며 대상지역 내 발생한 우수유출은 최종적으로 태화강으로 방류되는 구조를 갖고 있는 배수분구이다. 조도계수 민감도 분석에 적용한 조도계수의 범위는 일반적인 원형 우수관로의 조도계수 0.013을 기준으로 하고 0.002씩 증감을 시켜 총 6개 CASE에 대한 민감도 분석을 수행하였다. 모의 유량의 비교군이 되는 관측 유량의 경우는 초음파 유량계로 관측한 총 3개 지점의 유량자료를 이용하여 민감도 분석에 활용하였다. 조도계수 민감도 분석결과 조도계수 증가에 따라 첨두유량은 감소하게 된다. 각 지점별 첨두유량 변화 폭은 지점 4, 5, 6에 각각 7.0% (-3.4~3.6%), 14.3% (-7.5~6.8%), 15.6% (-7.7~7.9%) 증감 폭을 갖는 것으로 분석되었으며, 유역의 하류부로 갈수록 변동 폭이 커지는 것으로 분석되었다. 시계열 수문곡선 비교결과 지점 4에서는 조도계수 0.011, 지점 5는 0.013, 지점 7은 0.015를 적용하는 것이 실측치와의 상관계수가 가장 높게 나타나는 것으로 분석되었다. 이상의 분석 결과를 토대로 유역의 관 흐름 상태의 변화는 관로의 퇴적, 부유물, 폐유부착 등의 유지관리 상태에 따라 달라지며 특히 유역의 하류부로 갈수록 퇴적, 부유물 등의 축척이 누적되어 조도계수를 상류부 보다 기준 값보다 크게 적용해야 관측치 유량과 유사하게 모의되는 것을 확인하였다. 따라서 도시유출해석 모형에서의 조도계수 적용은 우수관로의 유지관리 상태 등을 고려하여 우수관로별 적용 값 다르게 입력하는 것이 타당한 것으로 판단된다.

  • PDF

Analysis of Sediment Out Problem in SWAT Modeling (SWAT 모형의 하천 유사량 모의에 대한 문제점 분석)

  • Choi, Yonghun;Yang, Dong-Seok;Park, Sang-Jun;Park, Un-Ji;Lim, kyoungjae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.417-417
    • /
    • 2021
  • 복합 토지이용 유역의 수문 모형에서 중요한 것은 큰 강우량이 발생하는 시점에서의 유출량과 유사량이다. SWAT 모형도 이와 같은 부분이 중요한 요소로 작용하는데 이는 모형의 평가가 실측값에 대한 예측값의 결정계수(Coefficient of determination, r2) 또는 Nash-Sutcliffe efficiency(NSE)와 같이 큰 값의 영향이 큰 지수들로 모형의 적합성을 평가하기 때문이다. 수질오염총량제와 같이 유역에서 발생하는 총량을 평가할 때는 강우로 인해 발생하는 유출과 수질뿐만 아니라 평시에 유출에 대한 수질도 중요한 부분이 될 수 있으나 모형의 평가에서 반영되기 어려우므로 실측값과 매우 다른 경향을 나타내는 경우가 많다. SWAT 모형에서는 하천 유사량에 사용되는 계수가 모든 상황에 일괄적으로 적용되기 때문에 과대 평가되는 경향이 있다. 본 연구에서는 SWAT 모형의 비강우시 하천 유사량 모의에 대한 부분이 강우시 하천 유사량에 미치는 영향을 분석하였다. SWAT 모형에서 하천 유출량과 관련된 계수를 확정하고, 하천 유사량과 보정에 사용되는 변수 중에서 prf 계수를 평시와 강우시 다른 계수 적용하여 하천 유사량 변화에 대한 SWAT 모형의 반응을 확인하였다. 지표면 유출과 관련된 변수는 변화하지 않으므로 하천에 유입되는 유사량은 항상 같다고 가정하면, 특정 강우 조건에서의 하천 유사량은 변화하지 않아야 하지만 SWAT 모형에서는 평시 유사량에 따라 달라지는 경향이 나타났다. 이는 평시 prf 계수가 낮아질 때 하천을 통해 유역 밖으로 배출되는 유사량이 감소하였기 때문에 특정 강우 조건에서 유사량이 달라진 것으로 해석될 수 있다. 또한 현재 SWAT 모형은 지표면 유출로 유입되는 유사량 일부가 퇴적되기 때문에 평시에 실제보다 높은 농도로 예측되는 경향도 나타났다. 이러한 문제들을 해결하기 위하여 지표면 유출로 발생하는 유사의 하천 퇴적량을 최소화하고, prf 계수를 강우반응에 대해 변동성을 부여하는 등 비강우시에도 실측과 비슷한 수준의 유사량이 모의 될 수 있도록 SWAT 모형을 개선하고 있다.

  • PDF

Study on the Alternative of Thiessen Coefficient by One Perceptron Neuron (단층퍼셉트론을 이용한 Thiessen 계수 대안에 관한 연구)

  • Park, Sung-Chun;Kim, Yong-Gu;Jeong, Cheon-lee;Moon, Byoung-seok
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2004.05b
    • /
    • pp.859-862
    • /
    • 2004
  • 유역평균강우량은 강우-유출모형을 통하여 유출량을 산정할 경우에 사용되며, 산정 방법에는 산술평균법, Thiessen 가중법, 등우선법 등이 있으나 일반적으로 Thiessen 가중법을 많이 적용하고 있다. Thiessen 가중법의 유역평균 강우량 산정방법은 각 관측소가 지배하는 면적(지배면적)을 전체면적으로 나누어 가중치(Thiessen계수)를 구한 후 여기에 각 관측소의 강우량을 곱하고 이를 합산함으로써 유역평균 강우량을 산정하는 방법이다. 본 연구에서는 면적비로 구해지는 Thiessen 계수의 대안을 찾기 위해 대상 유역으로는 영산강 1지류인 지석천 유역을 선정하였고, 단층퍼셉트론을 이용하여 동면, 청풍, 능주의 강우자료를 Input, 능주지점의 유출자료를 Output으로 상호 상관분석으로부터 한 개의 유출 사상에 대해 가장 높은 상관계수를 선택하여 Input 자료를 재구성하였다. 재구성 한 자료를 이용하여 훈련시키고 여기서 발생한 가중치를 Thiessen 계수의 대안의 값으로 추천한다.

  • PDF

Impacts of Surface Roughness Integration Using Remote Sensing Data: Concentration of Flood Flow Variation (원격탐사자료를 활용한 지표면 조도계수 통합의 영향: 홍수유출 변화를 중심으로)

  • Kang, Shin-Uk;Rieu, Seung-Yup;Lee, Kil-Ha;Hwang, Man-Ha
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.15 no.2 s.40
    • /
    • pp.33-42
    • /
    • 2007
  • A physical-based aggregation method was suggested to estimate surface roughness, which adequately represents the spatial heterogeneity of vegetation factors, from land cover property obtained from the remote sensing data. For the sensitivity analysis of surface roughness, the peak flow, peak time, and total volume were simulated by the NWS-PC. Effects of surface roughness estimated by three different integration methods (predominant, arithmetic mean, and aggregation approach) on the conceptual rainfall-runoff model parameters was analyzed. In the preliminary sensitivity test to surface roughness, the peak time had 10% variation and total volume had 2% variation. The peak time increased with surface roughness. A physical-based aggregation method was better than the existing method in the Soyanggang Dam basin for the results of STDEV, RMSE, NSE, and PME, but difference between them were small. The parameters related on the total baseflow were changed significantly with change of the surface roughness.

  • PDF