• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.5
• /
• pp.396-409
• /
• 2019

In this paper, a comparative study on the radiation techniques for the motion analysis of the three dimensional floating structure with the forward speed was carried out. The Sommerfeld radiation condition, the damping technique, and the point shift technique were used for the comparative study. Radiated wave patterns and hydrodynamic coefficients of the heave motion of floating structure with the forward speed were compared and analyzed. The characteristics and limitations of each radiation technique were analyzed through the calculation results. To overcome the limitations of conventional radiation techniques, the hybrid radiation technique combining the Sommerfeld radiation condition with the damping technique was proposed. It is confirmed that the proposed method, the Hybrid radiation technique, improves the limitation of the speed range and the dissipation of the wave of the conventional radiation technique. The motion analysis code of the three dimensional floating structure with the forward speed based on the Rankine source method with hybrid radiation technique was developed. In order to validate the developed code, hydrodynamic analyses were carried and compared with published experiments.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.362-372
• /
• 1989

It is important in design of vertical pumps to consider external excitation in addition to rotor vibration due to unbalance. In this study, a model of a vertical pump was developed for the analysis of its dynamic response. The vertical pump was modeled with lumped masses and springs which represent multi-cylindrical and rotor structure. A dynamic simulation program was developed and numerical calculation on the above mentioned problems were carried out.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.3
• /
• pp.77-86
• /
• 2010

In this study, the model of the indirect wind suction waste sorting machine for characteristics of the screening of waste was studied using computational fluid dynamics and the drag coefficient for the model and the suction wind speed were obtained. The wind separator are developing by installing a cyclone air outlet to the suction blower impeller waste is selective in a way that does not pass the features and characteristics of the inlet pipe of the pressure loss and separation efficiency can have a significant impact on. Using Wind separator for selection of waste in the waste prior research on the aerodynamic properties are essential. For plastic cases, it is reasonable to take the drag coefficient between 0.8 and 1.0, and for cans, compression depending on whether the cans, the drag coefficient is in the range from 0.2 to 0.7. The separation efficiency of waste as change suction speed was the highest efficiency when the suction speed was 25~26 m/s. Shape of the inlet, depending on how the transfer pipe of the duct pressure loss occurs because the inlet velocity changes through the appropriate design standards to allow for continued research is needed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.391-391
• /
• 2016

유수동역학적인 요소와 유사의 부유는 서로 상호작용을 주고받으며 다양한 현상을 만들어낸다. 많은 선행연구를 통해 유사 농도 등의 특성이 난류 구조 등의 변화를 야기하며, 변화한 난류 구조 역시 유사의 부유 등에 2차적인 영향을 준다는 점이 확인되었다. 본 연구에서는 가는 유사에 보다 집중하여 유사 부유와 이에 따른 연직구조 특성의 변화를 살펴본다. 본 연구에서는 1차원 연직 모형을 이용하여 수치실험을 수행한다. 본 연구에 이용된 모형은 가는 유사의 특성인 빠른 입자 반응 시간(Particle Response Time)이 가정되는 모형으로 선행연구를 통해 적용성이 검증된 것으로 판단한다. 주요 분석대상은 유사의 농도와 속도경사 간의 관계 등이며, 분석하는 유사 농도 종류는 일반적인 비점착성 유사의 경우에 관심을 가지는 질량 농도에 집중하여 결정된다. 수치실험 수행을 위해서는 정류 흐름, 진동파 흐름 등이 적용되었고 다양한 경우의 가는 유사를 고려하기 위한 실험조건의 변경이 이루어졌다. 수치실험 결과 진동파의 다양한 위상에서 조금씩 달라지는 연직구조가 확인되었다. 이는 보정되는 Schmidt 수의 값과도 연관관계를 가지는 것으로 나타났다. 특히 가는 유사의 경우에도 입자의 크기에 따라 다른 연직구조의 특성이 모의되었으며 이를 통해 수치실험의 경우에도 입자 크기의 고려 하에 매개변수의 보정이 이루어져야 한다는 점을 알 수 있다. 스토크스 수는 입자 반응 시간과 유체 난류 시간규모(Fluid Turbulence Ttime Scale)의 비율을 의미한다. 본 연구를 통해 스토크스 수가 유사의 확산강도 결정과 큰 상관 관계를 가지는 것을 알 수 있다. 이때 유사의 크기와 보정되는 Schmidt 수의 값은 고정되었다. 수치 계산시에 확산계수의 값이 부유 및 이에 따른 연직구조의 특성을 결정하는 중요한 변수라는 점을 고려할 때, 가는 유사의 부유를 모의할 때에는 세심한 주의가 요구된다는 점을 이해할 수 있다. 선행 연구사례를 통해 볼 때 부유하는 입자의 관성력이 Schmidt 수의 결정과 이에 따른 연직 구조의 계산에 큰 영향을 준다는 점을 알 수 있다. 본 연구에서는 스토크스 수를 관성력을 나타낼 수 있는 지표로서 계산하였지만 보다 정량적이고 효율적인 입자 관성력 지표가 제시될 때 효율적인 연구결과의 제시가 이루어질 수 있을 것으로 기대한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.197-206
• /
• 2023

Recently, the international community, including the International Maritime Organization (IMO), has strengthened regulations on air pollution emissions of ships, and eco-friendly ships are actively being developed to reduce exhaust gas emissions. Among them, rotor sail (RS), a wind-assisted ship propulsion system, is attracting attention again. RS is a cylindrical device installed on the ship deck, that generates hydrodynamic lift using a magnus effect. This is a next generation eco-friendly auxiliary propulsion technology, and Enercon company, which developed RS-applied ships, announced that fuel savings of more than 30% are possible. In this study, optimal installation conditions such as RS spacing and arrangement type were selected when multiple RSs were installed on ships. AR=5.1, SR=1.0, and D_e/D was fixed at 2.0 according to the RS arrangement, and the wind direction was considered only for the unidirectional +y-axis. Regarding arrangement conditions, five conditions were set at 3D intervals in the +x-axis direction from 3D to 15D and five conditions in the +y-axis direction from 5D to 25D. C_L, C_D and aerodynamic efficiency (C_L/C_D) were compared according to the square(□) and diamond(◇) shape arrangements. Consequently, the effect of RS on the longitudinal distance was not significantly different. However, in the case of RS flow characteristics according to the transverse distance, the interaction effect of RS was the greatest when the two RSs almost matched the wind direction. In the case of the RS flow characteristics according to the arrangement, notably, when the wind blew in the forward (0°) direction, the diamond (◇) arrangement was least affected by the backward flow between RSs.