• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.325-330
• /
• 2010

An open water rudder test was carried out to figure out the flow characteristics around a twin rudder at $Re=1.5{\times}10^4$. In the analysis, the unique characteristics of a twin rudder, which affects rudder forces, were explained. The analysis includes varying angles of attack from 10 to 30 degrees. In this paper, the measured results have been compared with each other to predict the performance characteristics of a twin rudder's 2-dimensional section by 2-frame grey level cross correlation PIV method. The length L=0.75C between upper and lower rudders could be defined as the critical length.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.4
• /
• pp.375-388
• /
• 1994

When conducting movable bed tests in a narrow wave tank, the hydrodynamics and morphology are assumed to be two-dimensional; hence, any three-dimensional patterns such as cross-tank variations of the profiles are neglected or averaged to represent the mean profiles at the measuring time. In this paper, six movable bed tests were carried out with a fairly fine sand to investigate (1) whether or not three-dimensional features can occur in relatively narrow wave tanks, and (2) various possible interrelationships and causes of the three-dimensionality. These movable bed studies suggested that there was a relatively slow feedback between the hydrodynamics and the morphology that led to initiation and growth of 3-D morphological features, resulting in cross-tank profile variations under certain stages of profile development, especially when the profile approached an equilibrium with overall stability.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.1
• /
• pp.30-42
• /
• 2010

The effects of internal waves on dynamics of hypoxic waters were investigated by numerical simulation by means of a hydrostatic-ecosystem coupled numerical model for Lake Biwa. The numerical model consists of hydrostatic and ecosystem submodels. Numerical simulation was carried out for a period during April 2007 and March 2008, after preliminary numerical simulation for three years. As a result, the numerical model could capture the vertical profiles of the observed water quality. During September 30 and October 21 in 2007, the major internal waves were Kelvin and Poincare waves, the periods of which were 1.63 or 1.77 days and 0.48 days, respectively. Hypoxic waters appeared in bottom boundary layer around October and were still when thermocline locates in upper layer. During late autumn and winter seasons, differences in density between upper and lower layers were reduced and the amplitude of internal waves increased. Hypoxic waters began to move under the effects of internal waves. Movement of hypoxic waters will diminish the habitat for aquatic organisms in deeper waters.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.281-281
• /
• 2019

수리모형실험은 수로 내에서 장시간 파랑을 발생시킬 경우, 수로 내에 반사 파랑의 성분이 누적될 수 있어 상당한 계측 오차를 발생시킬 우려가 있어 수리모형실험 결과의 검증이 필요하다. 일반적으로 수리모형실험 결과의 검증을 위해서는 동일 실험을 무수히 반복하여 불확실성을 제거하거나 다양한 수리실험실에서 수리모형실험을 수행하고 결과를 분석하여 불확실성을 제거할 수 있다. 그러나 이는 엄청난 시간과 노력은 물론 막대한 실험비용이 소요되기 때문에 경제적으로 효용성이 매우 낮아 현실적으로 수행이 어렵다. 이에 비해 수치모형실험은 상대적으로 저렴한 비용으로 수행할 수 있으며, 다수의 실험을 수행하지 않아도 불확실성을 제거할 수 있어 수리모형실험의 검증에 효율적이다. 일반적으로 난류 거동을 동반하는 복잡한 구조물 주변의 흐름 해석에는 3차원 CFD 모형이 필요하다. 특히, 병렬연산이 가능한 CFD 모형을 활용하면 수리모형실험에서도 재현이 쉽지 않은 다양한 조건에 따른 복잡한 흐름을 해석할 수 있어 효용성이 점점 증가하고 있다. 그러나 복잡한 구조물이 존재하게 되면 구조물에 재현에 막대한 격자구조가 필요하여 현실적으로 적용이 쉽지 않다. 이에 대한 대안으로 복잡한 구조물을 비교적 큰 격자에서 재현할 수 있는 가상경계법을 활용하는 연구가 활발히 진행되고 있다. 가상경계법은 Navier-Stokes 방정식에서 유체 내에 존재하는 고체를 모멘텀 이론으로 대체하여 고려하는 기법으로 수치모델링 수행 시 매질을 유체만으로 구성할 수 있어 안정적으로 적용할 수 있는 것으로 알려져 있다. 본 과업에서는 다양한 분야에서 널리 활용되고 있는 3차원 CFD 모형인 OpenFOAM®기반으로 파랑해석에 필요한 경계조건을 계산할 수 있는 olaFlow를 활용하여 복잡한 구조물을 지나는 파랑해석을 수행하기 위해 가상경계법을 olaFlow에 도입한 수치 알고리즘을 개발하였다. 개발한 수치알고리즘을 활용하여 복잡한 구조를 수치모델에서 재현하였으며, 수치모델에 적용된 수치 알고리즘의 안정성에 대해 고찰하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.19-26
• /
• 1995

The assessment of maneuverability of a ship is very important from the view point of safety of human beings and of pollution of ocean. And, it is quite natural that every ship yard wants to have some tools with which they can build a ship with good maneuverability. But, maneuvarability of a ship is very subtle problem, and to calculate the exact maneuvering motion, lots of captive model tests must be carried out. Futhermore, in the initial design stage we can not make the scale model, because the lines of a ship is not fixed. In this paper, some approximate method to calculate the maneuvering motion of a ship, with the principal dimensions of hull, and propeller, rudder characteristics only, is studied. And, proposed approximate method is used to calculate the turning and zig-zag maneuver of several ships. The results of those calculations and the usability of the method are discussed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.5
• /
• pp.285-295
• /
• 2020

In the case of small observation towers located at sea, it is necessary to confirm the change in dynamic characteristics due to the influence of environmental loads. In this study, the dynamic characteristics were analyzed and the numerical analysis model was designed through field dynamic response measurement on the Mangyeong Offshore Observation Tower (Mangyeong Tower) located near the Saemangeum Embankment. As a result of the measurement, the natural frequency was found to increase slowly as the tide level is lowered. In addition, it was confirmed that the same mode has two frequencies, which was judged to be a phenomenon in which the natural frequency was partially increased when the pile and the ground contacted by scouring. For numerical analysis, the upper mass, artificial fixity point, scour depth and fluid influences are reflected in the structural characteristics of the Mangyeong Tower. In addition, the model updating from the estimated natural frequency and pattern search algorithm was performed. From the model updating, it is expected that it can be applied to future studies on stability of Mangyeong Tower.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3458-3463
• /
• 2007

Leakage would happen because of the damage of high temperature and high-pressure valve in nuclear power plant. condition based prevention maintenance is essential by using the suitable method based on local condition. Energy loss prevention can prevent from an accurate test, Local actually and ability. The methods of test for high energy fluid leakage at present are analysis of ${\Delta}$T, AE(Acoustic Emission) analysis, and thermal image. The result for test of AC (Main steam) system in YNG 2 Unit reveals that the AE occurred clearly in leakage situation, but thermal image didn't occur. It is identified that leakage is occurred when the orifice located front and back of valve operates. It shows that making a impatient judgment by using the single method if it is leakage is containing uncertainty. So I think that using the Multi-Measuring method is more sound judgment than Single-Measuring method.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.3
• /
• pp.61-65
• /
• 2012

Air-water flow measurements are of importance for the coastal and ocean engineering fields. Although kinematic investigations of the multi-phase flows have been conducted for long time, velocity measurements still are concerned with many researchers and engineers in coastal and ocean areas. In the present study, an imaging technique using shadowgraphy and fiber optic probe for velocity measurements of air bubbles is introduced. The shadow graphy image technique is modified from the typical image velocimetry methods, and optical fibers are used for the well-known intrusive coupled phase-detection probe system. Since the imaging technique is a non-intrusive optical method from the air, it is usually applied for 2D flows. On the other hand, the double fiber optic probes touch flows regardless of flow patterns. The results of the flow measurements by both methods are compared and discussed. The methods are also applied to the measurements of overtopping flows by a breaking wave over the structure fixed on the free surface.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.80-87
• /
• 2017

This paper is related to structural assessment considering the hydroelastic response of ultra large container ships, especially from whipping (bow or stern impacts) and from springing (resonance). In general, whipping contributes both to increased fatigue and extreme loading, while springing does mainly contribute to increased fatigue loading. To evaluate the hydroelastic response quantitatively with high accuracy, numerical code considering hydro-structure coupling was applied and fatigue strength of a 13,100 TEU class containership was verified. The segmented model test and full scale measurement were also needed to assess the effect of whipping and springing on the fatigue and extreme capacity in more realistic way and for verification of the numerical tools. With reference to class rule, fatigue assessment considering springing effect and extreme assessment considering whipping effect were introduced.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.11 s.254
• /
• pp.1051-1056
• /
• 2006

The mean and RMS velocity field of the respiratory gas flow in the human airway was studied experimentally by particle image velocimetry (PIV). Some researchers investigated the airflow for the mouth breathing case both experimentally and numerically. But it is very rare to investigate the airflow of nose breathing in a whole airway due to its geometric complexity. We established the procedure to create a transparent rectangular box containing a model of the human airway for PIV measurement by combination of the RP and the curing of clear silicone. We extend this to make a whole airway including nasal cavities, larynx, trachea, and 2 generations of bronchi. The CBC algorithm with window offset (64 $\times$ 64 to 32 $\times$ 32) is used for vector searching in PIV analysis. The phase averaged mean and RMS velocity distributions in Sagittal and coronal planes are obtained for 7 phases in a respiratory period. Some physiologic conjectures are obtained. The main stream went through the backside of larynx and trachea in inspiration and the frontal side in expiration. There exist vortical motions in inspiration, but no prominent one in expiration.