• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.911-916
• /
• 2012

The purpose of this study is to review and suggest coastal shipping policies for introduction of WIG craft into domenstic passenger shipping market. Two Korean companies are leading in the development of WIG craft as an innovative sea transportation vehicle, and it is awaiting for commercialization. WIG craft is expected to be commercialized from coastal passenger market and we used AHP method to investigate the major factors and its' priority for smooth market entry. The results shows that priorities are on the WIG craft legislation, dock installation and operation, port state control, and pilot hiring and training, craft maintenance, and ship's certification in order.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.485-492
• /
• 2010

Intelligent Transport System(ITS) has been studied in various systems, such as road environment information offering, vehicle short-range wireless/wire communication, vehicle collision preventing and pedestrian safety offering systems. Related to this, the USN technology based on the sensing accuracy for motorists and pedestrians safety, the information reliability, the maintenance and convenience for Sensor Network is highlighted. This study uses various sensors to construct USN to the road, and connect it to the developed RSU so it collects the real-time road environment information and offers it to OBU and Traffic Control Surveillance Center with Road Weather Information System. RSU collects roadside information for driver's safety and analyzes it to offer IP and beacon service according to the service priority to OBU & upper layer terminal. In the upper layer terminal it is developed the IP based Settop Box application program to offer the urban traffic information & road environment, and environment sensor error, etc. Finally, RWIS develops the real-time collection of roadside information to complement the driver's safety to the intelligent traffic system, and presents various service modes with technology convergence.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.99-109
• /
• 2010

Existing research about automated wafer transport management strategy for semiconductor manufacturing equipment was mainly focused on dispatching rules which is optimized to specific system layout, process environment or transfer patterns. But these methods can cause problem as like requiring additional rules or changing whole transport management strategy when applied to new type of process or system. In addition, a lack of consideration for interconnectedness of the added rules can cause unexpected deadlock. In this study, in order to improve these problems, propose dynamic priority based transfer job decision making algorithm which is applicable with regardless of system lay out and transfer patterns. Also, extra rule handling part proposed to support special transfer requirement which is available without damage to generality for maintaining a consistent scheduling policies and minimize loss of stability due to expansion and lead to improve productivity at the same time. Simulation environment of Twin-slot type semiconductor equipment was built In order to measure performance and examine validity about proposed wafer scheduling algorithm.

• Clean Technology
• /
• v.27 no.4
• /
• pp.297-305
• /
• 2021

In the domestic aluminum industry, the extrusion process is a major process accounting for more than 40% of the total production. However, most domestic aluminum extrusion companies produce aluminum using old equipment that is more than 30 years old. Extrusion press is when the equipment is not replaced before the wear and breakage of major parts occur, reducing productivity and increasing the defect rate compared to new equipment. The old extrusion press often loses part drawings, so it is difficult to repair them properly on-site and to remanufacture them due to the lack of technical skills for maintenance. Therefore, a systematic remanufacturing plan must be designed from dismantling the equipment. In this study, remanufacturing FMEA was devised to remanufacture old extrusion press. The risk priority was analyzed by considering the degree of damage to the recycled parts, the cycle due to breakage/damage during the extrusion process, and the value of recycling resources due to remanufacturing. To standardize the remanufacturing process, remanufactured FMEA was performed through part analysis according to the structural analysis of the extrusion press. In addition, remanufacturing priorities were selected for each part, while remanufacturing itself was studied for efficiency of resource circulation and product quality stabilization.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.371-371
• /
• 2022

하천관리지리정보시스템(RIMGIS)은 하천정보의 표준화 및 전산화를 통한 정보제공과 하천에 관련한 업무를 지원하기 위해 개발된 시스템으로 5개의 지방국토관리청에서 관리하고 있는 하천대장 및 부도, 구조물도 등의 다양한 하천 관련 정보를 정보화하여 인허가 및 하천기본계획 등의 하천업무를 신속하고 효율적으로 수행할 수 있도록 운영되고 있다. 국가 주요 기반시설을 생애주기 관점에서 관리하고 소요재원의 확보근거를 마련하고자 "지속 가능한 기반시설 관리 기본법"이 제정되었고 최근에 시행되었다. 이에 따라 국토안전관리원에서는 도로·철도·철도 하천 등과 같은 사회기반시설(15종)의 노후화에 대비하여 전략적인 투자와 관리방식 도입을 목적으로 인프라 총조사 사업을 진하천 등과 같은 사회기반시설(15종)의 노후화에 대비하여 전략적인 투자와 관리방식 도입을 목적으로 인프라 총조사 사업을 진행하고 관리를 위해서 기반터 시스템을 도입하였다. 하천관리지리정보시스템과 기반터 시스템은 하천 기반시설의 정보가 데이터베이스에서 다뤄진다는 점에서 유사하지만, 기반터 시스템은 하천관리지리정보시스템과 달리 유지관리 측면에 대한 필요한 보수 주기, 필요 예산 등과 같은 정보를 산정할 수 있도록 프레임워크가 구성되어 있다. 그러나 하천과 기반시설의 코드를 연결하는 작업들은 현재 상황에서는 미흡한 실정이고, 유지관리와 시설물의 노후화를 가속화하는 홍수와 침수피해 등을 전체적으로 고려할 수 있는 방안에 대한 연구도 미진한 상황이다. 이에 본 연구에서는 하천 기반시설의 유지관리를 위해 하천, 제방, 인명에 대한 위험지수를 고려한 잠재 인명피해 위험도와 잠재 홍수피해 위험도를 평가기준으로 설정하고 적용하였다. 또한 이를 포함시킨 투자우선순위 평가기법을 도입하여 감가상각과 위험요소 등을 고려할 수 있는 데이터베이스 구성 방안을 제시하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.110-110
• /
• 2018

상수관로의 노후화는 단수유발, 수압부족 및 수질악화, 싱크홀 발생 피해와 누수로 인한 경제적 손실 등을 초래한다. 최근 상수관로의 노후화에 의한 피해가 심각해짐에 따라, 환경부에서는 전국적으로 노후관로를 개량 및 교체하는 작업을 시행하고 있다. 다만, 모든 노후관로를 일시에 보수 및 교체하는 것은 불가능하므로, 사용 중인 관로의 노후도를 정량적으로 판단하여 개량우선순위를 결정해야한다. 현재 국내에서는 '상수도 기술진단' 매뉴얼에 따른 관망성능평가 결과를 이용하여 상수관로의 노후화 정도를 평가하고 있다. 이는 평가항목 별로 기준을 나누어 조건값과 가중치를 부여하고, 총 점수를 합산하여 해당 관로의 평가 점수에 따라 등급을 판정하게 되는 점수평가법이다. 본 연구에서는 기존의 점수평가법과의 비교를 통하여, ANN(Artificial Neural Network)-Clustering 기법이 상수관로의 노후도 평가를 위한 새로운 평가방법이 될 수 있음을 제시하였다. 본 연구는 강원도 Y지역의 상수관로를 대상으로 진행하였으며, 기존의 관망성능평가 항목을 이용하여 전체 관로를 세 가지 등급으로 분류하여 노후도를 평가하였다. 또한 ANN-Clustering방법의 적용 가능성을 판단하기 위하여 기존의 점수평가법 결과와 비교분석을 실시하였으며, 전체 대상관로의 노후도 정도를 직관적으로 파악할 수 있도록 계산된 노후도 등급을 관망도에 도시하였다. ANN-Clustering방법은 관로의 다양한 특성값을 손쉽게 변경하여 적용할 수 있으며, 기존의 점수평가법과 더불어 상수관로의 유지관리를 위한 보다 객관적이고 합리적인 관망성능평가법이 될 수 있을 것으로 기대한다.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.6
• /
• pp.35-44
• /
• 2010

For efficient maintenance management of bridges, an establishment of asset management system is necessary which helps prediction of maintenance cost and strategic allocation of budget in consideration of top priority. The main purpose of this study is to suggest asset valuation method, which is practical in conformity with domestic situations, through researches on asset valuation method of bridges. This study has researched asset valuation method of bridge, which is appropriate for domestic situations by finding out advantages and disadvantages through investigating domestic and foreign application examples of asset valuation method for bridge facilities. In this study, asset valuation method by historical cost and replacement cost were suggested and a valuation model for bridges was established. In addition, two suggested valuation methods were applied to actual bridges which is used in Korea. As the result, it was analyzed that bridge asset valuation method in consideration of historical cost is desirable for the accounting purpose. And, it was analyzed that valuation method utilizing depreciated replacement cost(DRC), which could consider various factors, is desirable for the maintenance decision supporting purpose.

• Land and Housing Review
• /
• v.15 no.3
• /
• pp.177-188
• /
• 2024

This study aims to identify vulnerability factors through comprehensive safety diagnosis and to seek improvement measures for the safety and maintenance of facilities. In this study, the results of road tunnel inspections and diagnostics were converted into a database (DB). Using this data, we explored to identify vulnerable elements (NATM, ASSM) based on structural types and to develop efficient improvement measures. In this study, we analyzed 76 detailed safety diagnosis reports covering 45 different types of road tunnel facilities. In the detailed guidelines for comprehensive safety diagnosis, the database (DB) items for identifying vulnerable factors were selected by categorizing the basic information, such as the year of completion and damage items. In addition, AHP analysis was conducted separately through experts in related fields to analyze the correlation between damages. As a result, the primary vulnerability factors for NATM and ASSM were identified as cracks, leaks, insufficient lining thickness, and joint rear. ASSM was identified as relatively more susceptible to network cracks and material separation compared to NATM. In contrast, flaking and rebar exposure were interpreted as more significant vulnerabilities for NATM than for ASSM. In addition, the correlation between elements in NATM was found to be low, whereas in ASSM, the correlation between elements was high, indicating a more organic relationship.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.403-414
• /
• 2022

Many studies have been conducted on asset management of public facilities, as the importance of such management has been increasing. This basic study aims to present strategies for the practical use of public asset management, and seeks to propose efficient management and utilization measures from a cost perspective by comparing and analyzing the importance and impact relationship between cost items for public asset management. In this study, 19 sub-items and the top 4 items were chosen by deriving cost factors based on the previous literature. A survey was conducted, and the results of the survey were analyzed by using the Analytic Hierarchy Process(AHP) and Interpretive Structural Modeling (ISM) methods. The AHP was used to derive the priority between items, and ISM was used to identify major groups and mutual influences. As a result, those items showing both high priority and high importance, such as user cost, dismantling/disposal cost, replacement cost, maintenance/repair cost, etc. are determined as priority items to be considered for public asset management of public facilities. Also, it is necessary to minimize the impact on other items in public asset management by those items which are impacted less by other items but have significant impact on the items such as initial construction costs, conceptual design costs, construction costs, and supervision costs. It is expected that the results and analysis methods presented in this study can be used to provide strategies for asset management of public facilities.

• Journal of Korea Water Resources Association
• /
• v.51 no.11
• /
• pp.959-969
• /
• 2018

The aging water pipes induce various problems, such as water supply suspension due to breakage, insufficient water pressure, deterioration of water quality, damage by sink holes, and economic losses due to water leaks. However, it is impractical and almost impossible to repair and/or replace all deteriorated water pipes simultaneously. Hence, it is required to quantitatively evaluate the deterioration rate of individual pipes indirect way to determine the rehabilitation order of priority. In this study, ANN(Artificial Neural Network)-Clustering method is suggested as a new approach to assess and assort the water pipes. The proposed method has been applied to a water supply network of YG-county in Jeollanam-do. To assess the applicability of the model, the evaluation results were compared with the results of the Numerical Weighting Method (NWM), which is being currently utilized in practice. The assessment results are depicted in a water pipe map to intuitively grasp the degree of deterioration of the entire pipelines. The application results revealed that the proposed ANN-Clustering models can successfully assess the water pipe deterioration along with the conventional approach of NWM.