• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.11
• /
• pp.49-56
• /
• 1992

In this paper a band-pass filter using dielectric resonators with tuning screw and spacer at Ku-band is designed and constructed. For the filter design and construction, the coupling coefficient K between two resonators is numberically evaluated. The external quality factor Q$_{ex}$ is also calculated with a microstrip line which is necessary for the field excitation of dielectric resonator. The coupling between dielectric resonator and microstrip line depends mainly upon the magnetic field and is principal parameter in band-pass filter. The Q$_{ex}$ and K data which are evaluated by numberical analysis are practically applied to the filter construction. The theoretical Band-pass filter responses are given by Chebyshev approximation and they are nearly similar to the experimental results.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.3
• /
• pp.47-54
• /
• 1996

In this paper, the band pass filter was designed and constructed for personal communication services of information facilities. For the band pass filter design, after dielectric resonator structures were analyzed. J-inverter design theory and its simulation method were studied. The parameters obtained from design theory were practically applied to filter construction. The simulation results are well agreed with the measured result of constructed filter after fine tunings.

• Journal of Broadcast Engineering
• /
• v.3 no.1
• /
• pp.93-99
• /
• 1998

본 논문에서는 Ka-밴드 위성통신 송신주파수대역(30.085∼30.885 GHz)의 대역통과 필터를 유도성 fin-line 구조를 이용하여 분석, 설계 및 제작하였다. 도파관내의 공진기들이 전계면에 수직한 금속 fin으로 구성된 구조를 해석하는데 가장 적합한 모드정합법을 사용하여 설계하였다. 제작된 필터는 마이크로파대역 뿐만 아니라 밀리미터파대역의 주파수에서도 우수한 필터특성을 갖는다는 특징을 가지고 있으며, 상업용 도파관을 사용하는 대신에 가격이 저렴하고 가공이 용이한 알루미늄을 사용함으로써 대량생산이 가능하다. 또한 도파관내 금속삽입형태에 의한 대역 통과 필터의 구현이 아닌 유한한 두께를 갖는 포토-에칭된 유전체 기판을 삽입함으로써 제작성의 어려움을 해결하였다. 설계, 제작된 필터의 측정결과 통과대역내에서 1.6dBal만의 삽입손실과 18dB이상의 반사손실을 갖는 응답특성을 얻었으며 이론에 의한 계산치와 측정치와의 비교를 통해 본 논문에서 제안된 설계방법의 타당성을 입증하였다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.151-155
• /
• 1998

A new Fabry-Perot tunable filter has been built with simple construction, which does not require any additional aligning and/or beam-confining components for the reduction of the diffraction loss. For this feature, one of the two fibers for the filter is processed to have a concave mirror whose curvature is the same as that of the wavefront of the Gaussian beam from the first fiber. After high reflection coatings, the two fibers are aligned to result in an FP filter whose bandwidth, free spectral range, and insertion loss is 1.47nm, 52nm, 5.6dB respectively.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.132-135
• /
• 2002

A RF amplitude equalizer is designed to improve in-band flatness of Rf filters and/or systems using two dielectric resonators and a 90$^{\circ}$ hybrid. The equalizer has good return loss characteristics and V shaped S$_{21}$ response in passband which is suitable to compensate the ripple degradation due to insufficient quality factors of used resonators or narrow band width of filters or systems. After being connected to the equalizer, a 5-pole BPF at 1957MHz, which has 10 MHz bandwidth and 6㏈ ripple, shows only 1.8㏈ in-band ripple and good in- and out- band matched responses within used hybrid bandwidth without additional matching networks.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1984.04a
• /
• pp.25-28
• /
• 1984

This paper describes the design of band-pass filter using the dielectric resonator and microstrip line depends mainly upon the magnetic field and is principal parameter as band-pass filter. Because dielectric resonator band~pass filter has a very high-Q, the bandwidth of this filter is very narrow. as a result of experiment, the dielectric resonator bandwidth of this filter is very narrow. As a result of experiment, the dielectric resonator band-pase filter has various modes central frequencies due to the mode change and good characteristric as a band-pass filter.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.265-268
• /
• 2003

In RF application of resonator, cylinerical and transmission line(TRL) type are used generally, especially in ceramic modules the latter is used widely, TRL type resonators are used in VCO and RF filters etc.. TRL type resonators are divided stripline and microstripline and their characteristics depend on that of conductor and dielectric materials. In this study, the effect of material properties on the stripline resonator is measured and analyzed. Besides, the optimum design rule of resonator is presented.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.1
• /
• pp.23-30
• /
• 2007

We observed the NaCl concentration of solutions using a near-field microwave microprobe(NFMM). Instead of the usual technique, we take advantage of the noncontact evaluation capabilities of a NFMM. A NFMM with a high Q dielectric resonator allows observation of small variations of the permittivity due to changes in the NaCl concentration. The changes of NaCl concentration due to a change of permittivity of the NaCl solution were investigated by measuring the microwave reflection coefficient $S_{11}$ of the resonator. The NaCl sensor consisted of a dielectric resonator coupled to a probe tip at an operating frequency of about f=4 GHz. The change of the NaCl concentration is directly related to the change of the reflection coefficient due to a near field electromagnetic interaction between the probe tip and the NaCl solution. In order to determine the probe selectivity, we measured a mixture solution of NaCl and glucose.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.5
• /
• pp.63-68
• /
• 2004

This paper presents a design of 12㎓ VCBRO(voltage controlled dielectric resonator oscillator) using a novel PBG(photonic band gap) ground plane and a varactor circuit that enhances the frequency linearity of VCO with different bias to varactors. The PBG structures are used for suppressing the second and third harmonics without any filters. To simulate the accurate resonating frequency, a DR coupled with microstrip lines is analysed by FTM(finite element method) simulation, and the results are transformed into scattering parameters to design the VCO. Some measured results are presented to show the usefulness of the proposed techniques.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1712-1723
• /
• 2001

This paper presents a design procedure and manufacturing techniques realizing of a 5.8 GHz duplexer based on cylindrical coaxial dielectric resonator. Upto Q$\times$f$\_$o/=30,000 cylindric coaxial dielectric resonator was developed control by addition of dielectric materials. This resonator shows attenuation characteristics -40 dB for transmitter and -50 dB for receiver by consisting of two sets of 4-stage cavity resonator within f$\_$o/$\pm$10 MHz bandwidth which was requirement of DSRC. Employing the measurement results, design procedure to characterize the transmission and reflection properties are presented.